提交 · 46959b7790e3609e795c3b5e70e58dcd22c9e207 · openeuler / raspberrypi-kernel

20 9月, 2011 20 次提交
- B
  drm/nouveau/dp: remove reliance on vbios for native displayport · 46959b77
  由 Ben Skeggs 提交于 7月 01, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  46959b77
- B
  drm/nouveau/dp: rewrite auxch transaction routines · 43720133
  由 Ben Skeggs 提交于 7月 20, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  43720133
- B
  drm/nouveau: determine timing crystal freq from straps · f2cbe46f
  由 Ben Skeggs 提交于 7月 21, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  f2cbe46f
- R
  drm/nouveau/pm: Document and expose CL and WR for 0x1002Cx · 2228c6fe
  由 Roy Spliet 提交于 7月 14, 2011
```
Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl>
```
  2228c6fe
- R
  drm/nouveau/pm: add initial NV3x/NVCx memtiming support, improve other cards · 9a782488
  由 Roy Spliet 提交于 7月 09, 2011
```
NV30: Create framework for memtm
NV50: Improve reg creation,
NV50: Use P.version instead of card codename/stepping,
NVC0: Initial memtiming code for Fermi,
Renamed regs for consistency,
Overall redesign to improve readability,
Avoid kfree on null-pointer
Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl>
```
  9a782488
- B
  drm/nvd0/disp: very initial evo setup · 26f6d88b
  由 Ben Skeggs 提交于 7月 04, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  26f6d88b
- B
  drm/nouveau/bios: allow passing in crtc to the init table parser · 02e4f587
  由 Ben Skeggs 提交于 7月 06, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  02e4f587
- B
  drm/nvd0/gpio: initial implementation · d7f8172c
  由 Ben Skeggs 提交于 7月 03, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  d7f8172c
- B
  drm/nouveau: allow modeset module option to select 'headless mode' · 03bc9675
  由 Ben Skeggs 提交于 7月 04, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  03bc9675
- B
  drm/nouveau: make general drm modesetting init common · 048a8859
  由 Ben Skeggs 提交于 7月 04, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  048a8859
- B
  drm/nvd0: add a card_type for 0xdX chipsets · 2e9733ff
  由 Ben Skeggs 提交于 7月 02, 2011
```
These are different enough from 0xcX to justify it, half fermi, half
kepler(??)..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  2e9733ff
- B
  drm/nouveau: embed nouveau_mm · 987eec10
  由 Ben Skeggs 提交于 6月 24, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  987eec10
- B
  drm/nouveau: rename nv40_mpeg to nv31_mpeg · 323dcac5
  由 Ben Skeggs 提交于 6月 23, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  323dcac5
- B
  drm/nvc0/pm: more complete parsing of clock domains · 9698b9a6
  由 Ben Skeggs 提交于 6月 21, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  9698b9a6
- B
  drm/nouveau: add function to wait until a callback returns true · 78e2933d
  由 Ben Skeggs 提交于 6月 18, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  78e2933d
- B
  drm/nva3/pm: parse/reclock vdec/41a0 clocks · 4fd2847e
  由 Ben Skeggs 提交于 6月 17, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  4fd2847e
- B
  drm/nouveau/pm: add hooks to get/set *all* clocks at once · 77e7da68
  由 Ben Skeggs 提交于 6月 17, 2011
```
This is probably better than having to tell the common code about all the
clocks that exist on every chipset.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  77e7da68
- B
  drm/nouveau/pm: some fermi chipsets still use volt 0x30 · 03ce8d9e
  由 Ben Skeggs 提交于 6月 10, 2011
```
Fun, fun.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  03ce8d9e
- B
  drm/nouveau/pm: add support for parsing perflvl voltage on fermi chips · 3b5565dd
  由 Ben Skeggs 提交于 6月 09, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  3b5565dd
- B
  drm/nouveau/pm: store voltage in microvolts · c3450239
  由 Ben Skeggs 提交于 6月 09, 2011
```
Instead of 10s of millivolts, to match fermi vbios.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  c3450239
25 7月, 2011 2 次提交

drm/nouveau: pass flag to engine fini() method on suspend · 6c320fef

由 Ben Skeggs 提交于 7月 20, 2011

It may not be necessary to fail in certain cases (such as failing to idle)
on module unload, whereas on suspend it's important to ensure a consistent
state can be restored on resume.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

6c320fef

B
drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing · 70ad25ab
由 Ben Skeggs 提交于 7月 20, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
70ad25ab

23 6月, 2011 18 次提交

drm/nouveau/temp: Fix signed/unsigned int logic · 40ce4279

由 Emil Velikov 提交于 6月 22, 2011

Many (all?) of the coefficients related to calculating the
correct temperature are signed integers

This patch correcly parses and stores those values
It also ensures that the default offset is 0 (previously 1)

Affected cards - the original nv50 and the nv40 family
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

40ce4279

drm/nouveau: rework vram init/fini ordering a little · 24f246ac

由 Ben Skeggs 提交于 6月 10, 2011

Commit "drm/nouveau: add some debug output if nouveau_mm busy at destroy time"
revealed an issue where vram mm takedown would actually fail due to there
still being nodes present, causing nouveau to leak a small amount of memory
on module unload.

This splits TTM/nouveau_mm a bit more cleanly and ensures nouveau_mm fini
isn't done until all gpuobjs are also destroyed.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

24f246ac

B
drm/nouveau: remove implicit mapping of every bo into chan_vm · 2fd3db6f
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
2fd3db6f
B
drm/nouveau: remove 'chan' argument from nouveau_bo_new · 7375c95b
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
7375c95b
B
drm/nvc0: explicitly map PDISP semaphore buffer into each channel's vm · 3d483d57
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
3d483d57
B
drm/nv84-nvc0: explicitly map semaphore buffer into channel vm · d02836b4
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
d02836b4
B
drm/nv50-nvc0: explicitly map pushbuf bo into channel vm · ce163f69
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
ce163f69
B
drm/nv50-nvc0: explicitly map notifier bo into channel vm · 0b718733
由 Ben Skeggs 提交于 6月 07, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
0b718733
B
drm/nouveau: initial changes to support multiple VMAs per buffer object · fd2871af
由 Ben Skeggs 提交于 6月 06, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
fd2871af

drm/nouveau: create temp vmas for both src and dst of bo moves · d2f96666

由 Ben Skeggs 提交于 6月 06, 2011

Greatly simplifies a number of things, particularly once per-client GPU
address spaces are involved.

May add this back later once I know what things'll look like.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

d2f96666

drm/nouveau: store bo's page size in nouveau_bo · f91bac5b

由 Ben Skeggs 提交于 6月 06, 2011

Was previously assuming a page size of 4KiB unless a VMA was present to
override it. Eventually, a buffer won't necessarily have a VMA at all at
some stages of its life, so we need to store this info elsewhere.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

f91bac5b

drm/nouveau: will need to specify channel for vm-ful gpuobj allocations · 6e32fedc

由 Ben Skeggs 提交于 6月 03, 2011

Abuses existing gpuobj_new() chan argument for this, which in turn forces
all NVOBJ_FLAG_VM allocations to be done from the global heap, not
suballocated from the channel's private heap.  Not a problem though in
practise.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

6e32fedc

B
drm/nouveau/gem: implement stub hooks for GEM object open/close · 639212d0
由 Ben Skeggs 提交于 6月 03, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
639212d0

drm/nouveau: remove 'chan' argument from nouveau_gem_new · f6d4e621

由 Ben Skeggs 提交于 6月 07, 2011

Userspace hasn't passed us a channel_hint for a long long time now, and
there isn't actually a need to do so anymore anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

f6d4e621

B
drm/nv50-nvc0/vm: take client reference on shared channel vm · fe32b16e
由 Ben Skeggs 提交于 6月 03, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
fe32b16e

drm/nouveau: store a per-client channel list · e8a863c1

由 Ben Skeggs 提交于 6月 01, 2011

Removes the need to disable IRQs to lookup channel struct on every pushbuf
ioctl, among others.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

e8a863c1

B
drm/nouveau: allocate structure to store per-client data · 3f0a68d8
由 Ben Skeggs 提交于 5月 31, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
3f0a68d8

drm/nvc0/gr: import and use our own fuc by default · 0411de85

由 Ben Skeggs 提交于 5月 25, 2011

The ability to use NVIDIA's fuc has been retained *temporarily* in order
to better debug any issues that may be lingering in our initial attempt
at writing this ucode.  Once I'm fairly confident we're okay, it'll be
removed.

There's a number of things not implemented by this fuc currently, but
most of it is sets of state that our context setup would not have used
anyway.  No doubt we'll find out what they're for at some point, and
implement it if required.

This has been tested on 0xc0/0xc4 thus far, and from what I could tell
it worked as well as NVIDIA's.  It's also been tested on 0xc1, but even
with NVIDIA's fuc that chipset doesn't work correctly with nouveau yet.

0xc3/0xc8/0xce should in theory be supported too, but I don't have the
hardware to check that.

There's no doubt numerous bugs to squash yet, please report any!
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

0411de85