We have several reports which says acer-wmi is loaded on ideapads
and register rfkill for wifi which can not be unblocked.

Since ideapad-laptop also register rfkill for wifi and it works
reliably, it will be fine acer-wmi is not going to register rfkill
for wifi once VPC2004 is found.

Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no
wifi rfkill capability, there are reports which says acer-wmi also
block wireless on Thinkpad E520/E420.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Before set communication devices state, we need query out all devices state to set
the states bitmap. That will be better use the devices bitmap in SMBIOS type Aah
instead of hardcode in driver.

Tested on Acer Travelmate 8572.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

That will be better to check the existence of internal wireless device
when we set wireless capability and generate killswitch for it. It can
avoid userland access wireless rfkill but the machine doesn't have internal
wireless device.

Tested on Acer Travelmate 8572

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There have new acer notebooks' BIOS provide new WMID_GUID3 and
ACERWMID_EVENT_GUID methods.

Some of machines still keep the old WMID_GUID1 method but more and
more machines were already removed old wmi methods from DSDT.

So, this patch add a new ACER_WMID_v2 interface flag to represent
new acer notebooks, the following is definition:

 + ACER_WMID:
        It means this machine only provides WMID_GUID1/2 methods.

 + ACER_WMID_v2:
        It means this machine provide new WMID_GUID3 and WMID_EVENT_GUID
        methods.
        Some ACER_WMID_v2 machines also provide old WMID_GUID1/2 methods,
        but we still query/set communication device's state by new
        WMID_GUID3 method.

Tested on Acer Travelmate 8572
Tested on Acer Aspire 4739Z
Tested-by: NAceLan Kao <acelan.kao@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There will be better to check the wireless capability flag
(ACER_CAP_WIRELESS) before register wireless rfkill because maybe
the machine doesn't have wifi module or the module removed by user.

Tested on Acer Travelmate 8572
Tested on Acer Aspire 4739Z
Tested-by: NAceLan Kao <acelan.kao@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This quirk fixes the wlan rfkill status on this machine. Without
it, wlan is permanently soft blocked whenever acer-wmi is loaded.

BugLink: https://bugs.launchpad.net/bugs/857297Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Reviewed-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The AMW0 function in acer-wmi works on Lenovo ideapad S205 for control
the wifi hardware state. We also found there have a 0x78 EC register
exposes the state of wifi hardware switch on the machine.

So, add this patch to support Lenovo ideapad S205 wifi hardware switch
in acer-wmi driver.

Reference: bko#37892
	https://bugzilla.kernel.org/show_bug.cgi?id=37892

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Tested-by: NFlorian Heyer <heyho@flanto.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

we can now autodetect internal 3G device and already have the threeg
rfkill device. So, we plan to remove threeg sysfs support for it's no
longer necessary.

We also plan to remove interface sysfs file that exposed which ACPI-WMI
interface that was used by acer-wmi driver. It will replaced by information
log when acer-wmi initial.

We keep it around for userspace compatibility reasons, schedule removal
in 2012.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Acked-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Fix a bitwise bug that was found by Joern Heissler, it must be OR
but not AND when we query current device state.
Acked-by: NJoern Heissler <linux-acpi@joern.heissler.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

acer-wmi is indiscriminately using the device state from hotkey
events to update the various rfkill states. On the Aspire 1830 this
can result in a soft block on the wlan when the touchpad hotkey is
pressed, as it is reporting a non-zero device state that does not
reflect the wireless status. To fix this, only update rfkill states
when a wlan or bluetooth hotkey is pressed.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Acer WMID_GUID1/2 method's return value was declared to integer
type on Gateway notebook.
So, add this patch for support integer return type.

Reference: bko#33032
	https://bugzilla.kernel.org/show_bug.cgi?id=33032

Tested on Gateway NV5909H laptop
Tested-by: NFilipus Klutiero <chealer@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Have many Acer notebooks' BIOS already support new WMID_GUID3 method.
On those machines, that will be better set communication device by
evaluate WMID_GUID3 method.

Tested on Acer Travelmate 8572

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Acer WMID_GUID1/2 method's return buffer was declared to 64-bits
on some Acer notebook, but WMI method only use 32-bits in return
buffer.
So, add this patch for allow 64-bits return buffer.

Reference: bko#34142
	https://bugzilla.kernel.org/show_bug.cgi?id=34142

Tested on Acer Travelmate 5735Z-452G32Mnss
Tested-by: NMelchior FRANZ <melchior.franz@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

That will be better to check the existence of internal 3G device when
we set threeg capability and generate killswitch for threeg. It can
avoid userland access 3G rfkill but the machine doesn't have internal
3G device.

Reference: bko#32862
	https://bugzilla.kernel.org/show_bug.cgi?id=32862

Tested on Acer Aspire 8930G, Acer Travelmate 8572
Tested-by: NHector Martin <hector@marcansoft.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key
doesn't send 0x1 as acpi event key code, but 0x3. This patch also
makes the module ignore hotkey acpi events for functions that are
already handled without. This avoids warning message "keyboard:
can't emulate rawmode for keycode 240".
Signed-off-by: NMelchior FRANZ <mfranz@aon.at>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The driver set module parameter value: mailled, threeg and brightness
to BIOS by evaluate wmi method when driver was initialed. The default
values for those parameters are -1, so, that will be better don't set
negative value to BIOS.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Convert pr_warning to pr_warn.
Add some missing newlines to pr_<level> uses.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

wmi:6AF4F258-B401-42Fd-BE91-3D4AC2D7C0D3 needs to be
wmi:6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 in module alias for acer-wmi is
automatically loaded.

Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Acer WMI hotkey event's result include current device status, just
need sync the status to killswitch after acer-wmi driver receive
hotkey event but not always poll device status. This is good for
performance.

But, if use EC raw mode, Acer BIOS will not emit wmi event and
leave EC to control device status. So, still startup polling job
when doesn't detect WMI event GUID or user choice to use ec_raw_mode.

Tested on Acer TravelMate 8572 notebook.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Acer BIOS keeps devices state when system reboot, but reset to default
device states (Wlan on, Bluetooth off, wwan on) if system cold boot.
That means BIOS's initial state is not always real persistence.

So, removed rfkill_init_sw_state because it sets initial state to
persistence then replicate to other new killswitch when rfkill-input
enabled.
After removed it, acer-wmi set initial soft-block state after rfkill
register, and doesn't allow set_block until rfkill initial finished.

Reference: bko#31002
	https://bugzilla.kernel.org/show_bug.cgi?id=31002

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Oldřich Jedlička <oldium.pro@seznam.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

acer-wmi: use pr_<level> for messages

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch change WMI ID to upper characters. With this patch module
acer-wmi is automatically loaded when WMI ID is detected.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch deactive mail led when laptop is going to hibernete/suspend
or power off. After resume from hibernate/suspend correctly restore
mail led state.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE,
and userspace should use udev's key re-mapping facilities while X
is unable to process keycodes above 255 to adjust to the keycode.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

There may be multiple ways of controlling the backlight on a given
machine.  Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: stable@kernel.org

Don't allow everybody to write to hardware registers.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Including linux/dmi.h once in drivers/platform/x86/acer-wmi.c is enough.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Reviewed-by: NLee, Chun-Yi <jlee@novell.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Enabled Acer Launch Manager mode to disable the EC raw behavior for
communication devices when WMID3 method available. And, we also add a
ec_raw_mode kernel module option for enable The EC raw behavior mode
when anyone what reset it back.
When Acer Launch Manager mode enabled, EC will stop to touch any
communication devices' RF state or power state that causes conflict
with rfkill_input or any userland daemon to charge the rfkill rules.
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Acked-by: NJiri Benc <jbenc@suse.cz>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Initial wlan/bluetooth/wwan rfkill software block state when acer-wmi driver
probe. Acer notebook can save the devices state and this patch can use it to
initial the devices' rfkill state.
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Check the Acer OEM-specific Type AA to detect the WiFi/Bluetooth/3G
devices available or not, and set the devices capability flag.
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NThomas Renninger <trenn@suse.de>
Acked-by: NJiri Benc <jbenc@suse.cz>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add 3G rfkill sysfs file for provide userland to control 3G device
on/off by using WMI method.
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Acked-by: NJiri Benc <jbenc@suse.cz>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NCarlos Corbaho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add acer wmi hotkey event support. Install a wmi notify handler to
transfer wmi event key to key code, then send out keycode through acer
wmi input device to userland.
Signed-off-by: NLee, Chun-Yi <jlee@novell.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NThomas Renninger <trenn@suse.de>
Acked-by: NJiri Benc <jbenc@suse.cz>
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

backlight_device_register has been expecting a const "ops" argument, and using
it as such, since 9905a43b. Let's make the
remaining backlight_ops instances const.

Inspired by hunks of the grsecurity patch, updated for newer kernels.
Signed-off-by: NLionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Remove non-used acer_quirks struct definition.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.

Call Trace:
wmab_execute
  -> wmi_evaluate_method
    -> acpi_evaluate_object

Thus if callers of wmab_execute() pass ACPI_ALLOCATE_BUFFER, the return
buffer must be kfreed if wmab_execute return AE_OK.

[akpm@linux-foundation.org: avoid multiple return points, remove unneeded cast, remove unneeded initialisation of `status']
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.

The callers of wmi_query_block() pass ACPI_ALLOCATE_BUFFER, and thus must
check its return value before accessing or kfree() on the buffer.

This patch adds a missing kfree(out.pointer) before exit
WMID_set_capabilities() and get_wmid_devices().
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

dmi_check_system() walks the table running matching functions until someone
returns non zero or we hit the end.

This patch makes dmi_matched to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>