Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The overflow might happen when passing blocknr into
ext3_get_group_no_and_offset(), because it expects type ext3_fsblk_t
which might be smaller than uint64_t. This will most likely happen when
calling FITRIM with the default argument len = ULLONG_MAX.

Fix this by using "end" variable instead of "start+len" as it is easier
to get right and specifically check that the end is not beyond the end
of the file system, so we are sure that the result of
get_group_no_and_offset() will not overflow. Otherwise truncate it to
the size of the file system.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently ext3 updates ctime in ext3_splice_branch() which is called whenever
we allocate one block. But it is wasteful because ext3 doesn't support
nanosecond timestamp. This leads to a performance loss.
Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: NJan Kara <jack@suse.cz>

dquot_free_block() is called in the end of ext3_new_blocks() and updates
information of the inode structure. However, this update is not necessary
if the number of blocks we requested is equal to the number of
allocated blocks.
Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Delete any instances of include module.h that were not strictly
required.  In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NJan Kara <jack@suse.cz>

The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation
without i_mutex. This can lead to a race with the other operations that
update i_ctime. This is not a big issue but let's make the ioctl consistent
with how we handle e.g. other timestamp updates and use i_mutex to protect
inode changes.
Signed-off-by: NDjalal Harouni <tixxdz@opendz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
remounted read-only. This unnecessarily scares users (well, they should be
scared because of filesystem error, but the stack trace distracts them from the
right source of their fear ;-). We could as well just remove the WARN_ON but
it's not hard to fix it to not trip on filesystem with errors and not use more
cycles in the common case so that's what we do.

CC: stable@kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

ll_rw_block() is deprecated. Thus we replace it with other functions.

CC: Jan Kara <jack@suse.cz>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Both ext3 and ext4 put the half-created symlink inode into the orphan list
for a while (see the comment in ext[34]_symlink() for gory details).  Then,
if everything went fine, they pull it out of the orphan list and bump the
link count back to 1.  The thing is, inc_nlink() is going to complain about
seeing somebody changing i_nlink from 0 to 1.  With a good reason, since
normally something like that is a bug.  Explicit set_nlink(inode, 1) does
the same thing as inc_nlink() here, but it does *not* complain - exactly
because it should be usable in strange situations like this one.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

it's both faster (in case when file has been opened for write) and cleaner.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is an fsfuzzer bug.  ->s_journal is set at the end of
ext3_load_journal() but we try to use it in the error handling from
ext3_get_journal() while it's still NULL.

[  337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024
[  337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.041687] PGD 0
[  337.043118] Oops: 0002 [#1] SMP
[  337.044483] CPU 3
[  337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan]
[  337.047633]
[  337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511    /RV411/RV511/E3511/S3511
[  337.051064] RIP: 0010:[<ffffffff816e6539>]  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.052879] RSP: 0018:ffff8800b1d11ae8  EFLAGS: 00010282
[  337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000
[  337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024
[  337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000
[  337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000
[  337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8
[  337.063385] FS:  00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000
[  337.065110] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0
[  337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0)
[  337.073800] Stack:
[  337.075487]  ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000
[  337.077255]  ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250
[  337.078851]  ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31
[  337.080284] Call Trace:
[  337.081706]  [<ffffffff811f48cf>] log_start_commit+0x1f/0x40
[  337.083107]  [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0
[  337.084490]  [<ffffffff81131e31>] evict+0xa1/0x1a0
[  337.085857]  [<ffffffff81132031>] iput+0x101/0x210
[  337.087220]  [<ffffffff811339d1>] iget_failed+0x21/0x30
[  337.088581]  [<ffffffff811905fc>] ext3_iget+0x15c/0x450
[  337.089936]  [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100
[  337.091284]  [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde
[  337.092641]  [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30
[  337.093991]  [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60
[  337.095332]  [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0
[  337.096680]  [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210
[  337.098026]  [<ffffffff8119a770>] ext3_mount+0x10/0x20
[  337.099362]  [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0
[  337.100759]  [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10
[  337.102330]  [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0
[  337.103889]  [<ffffffff8113611f>] do_kern_mount+0x4f/0x100
[  337.105442]  [<ffffffff811378fc>] do_mount+0x19c/0x890
[  337.106989]  [<ffffffff810e8456>] ? memdup_user+0x46/0x90
[  337.108572]  [<ffffffff810e84f3>] ? strndup_user+0x53/0x70
[  337.110114]  [<ffffffff811383fb>] sys_mount+0x8b/0xe0
[  337.111617]  [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b
[  337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38
[  337.116588] RIP  [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30
[  337.118260]  RSP <ffff8800b1d11ae8>
[  337.119998] CR2: 0000000000000024
[  337.188701] ---[ end trace c36d790becac1615 ]---
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Call ext3_mark_recovery_complete() in ext3_fill_super() only if
needs_recovery is non-zero.

Besides that, print out "recovery complete" message after calling
ext3_mark_recovery_complete().

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Quota file is fs's metadata, so it is reasonable  to permit use
root resevation if necessary. This patch fix 265'th xfstest failure
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

There are no user of EXT3_IOC32_WAIT_FOR_READONLY and also it is
broken. No one set the set_ro_timer, no one wake up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>

This quites the sparse noise:

warning: symbol 'ext3_trim_all_free' was not declared. Should it be static?
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NJan Kara <jack@suse.cz>

Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.

All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Replace all occurnanced of the undocumented READ_META with READ | REQ_META
and remove the unused WRITE_META define.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

For a long time now orlov is the default block allocator in the ext3. It
performs better than the old one and no one seems to claim otherwise so
we can safely drop it and make oldalloc and orlov mount option
deprecated.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
identifier i;
expression e;
@@

(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);

// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJan Kara <jack@suse.cz>

If there are some inodes in orphan list while a filesystem is being
read-only mounted, we should recommend that peole umount and then
mount it when they try to remount with read-write. But the current
message and comment recommend that they umount and then remount it
which may be slightly misleading.
Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NJan Kara <jack@suse.cz>

ext3_sync_file() does not need i_mutex for anything so just drop it.
Signed-off-by: NJan Kara <jack@suse.cz>

Commit ae54870a ("ext3: Fix lock inversion in ext3_symlink()")
recalculated the number of credits needed for a long symlink, in the
process of splitting it into two transactions.  However, the first
credit calculation under-counted because if selinux is enabled, credits
are needed to create the selinux xattr as well.

Overrunning the reservation will result in an OOPS in
journal_dirty_metadata() due to this assert:

  J_ASSERT_JH(jh, handle->h_buffer_credits > 0);

Fix this by increasing the reservation size.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... so that &inode->i_mode could be passed to it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

so we can pass &inode->i_mode to it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss.  This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: posix_acl_create(&acl, gfp, mode_p).  Replaces acl with
modified clone, on failure releases acl and replaces with NULL.
Returns 0 or -ve on error.  All callers of posix_acl_create_masq()
switched.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: posix_acl_chmod(&acl, gfp, mode).  Replaces acl with modified
clone or with NULL if that has failed; returns 0 or -ve on error.  All
callers of posix_acl_chmod_masq() switched to that - they'd been doing
exactly the same thing.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>