- 26 3月, 2006 40 次提交
-
-
由 Jan Beulich 提交于
Touching of the floating point state in a kernel debugger must be NMI-safe, specifically math_state_restore() must be able to deal with being called out of an NMI context. In order to do that reliably, the context switch code must take care to not leave a window open where the current task's TS_USEDFPU flag and CR0.TS could get out of sync. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
For consistency and to have only a single place of definition, replace set_debug() uses with set_debugreg(), and eliminate the definition of thj former. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
While AMD formally permits multi-byte execution breakpoints, Intel disallows 8-byte as much as 2- or 4-byte ones. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Fix one place where the previous change of cpu_pda from being an array to being a macro was not properly carried out. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It conflicts with the struct node in node.h Actually the x86-64 version was there first, but .. Suggested by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
8MB is not really very random, use 1GB (or more with larger page sizes) instead. Also use the low bits of the random generator output now instead of throwing them away. Only enabled on x86-64 right now. Other architectures need to add a suitable STACK_RND_MASK Cc: mingo@elte.hu Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The upcomming gcc 4.2 got a new option -mtune=generic to tune code for both common AMD and Intel CPUs. Use this option when available for generic kernels. On x86-64 it is used with CONFIG_GENERIC_CPU. On i386 it is enabled with CONFIG_X86_GENERIC. It won't affect the base line CPU support in any ways and also not the minimum supported CPU. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Memory >39bits has a different PUD. Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] kzalloc conversion for gx-suspmod [CPUFREQ] Whitespace cleanup [CPUFREQ] Mark longhaul driver as broken. [PATCH] cpufreq: fix section mismatch warnings [CPUFREQ] Fix the p4-clockmod N60 errata workaround. [CPUFREQ] Fix handling for CPU hotplug [CPUFREQ] powernow-k8: Let cpufreq driver handle affected CPUs [CPUFREQ] Lots of whitespace & CodingStyle cleanup. [CPUFREQ] Remove duplicate cpuinfo struct [CPUFREQ] Silence powernow-k8 warning on k7's.
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: P_Key change event handling IB/mthca: Fix modify QP error path IPoIB: Fix network interface "RUNNING" status IB/mthca: Fix indentation IB/mthca: Fix uninitialized variable in mthca_alloc_qp() IB/mthca: Check SRQ limit in modify SRQ operation IB/mthca: Check that SRQ WQE size does not exceed device's max value IB/mthca: Check that sgid_index and path_mtu are valid in modify_qp IB/srp: Use a fake scatterlist for non-SG SCSI commands IPoIB: Pass correct pointer when flushing child interfaces
-
git://oss.oracle.com/home/sourcebo/git/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2: ocfs2: finally remove MLF* macros ocfs2: don't use MLF* in the file system ocfs2: don't use MLF* in dlm/ files ocfs2: don't use MLF* in cluster/ files [PATCH] ocfs2: dlm recovery fixes [PATCH] ocfs2: fix hang in dlm lock resource mastery ocfs2: use __attribute__ format
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] New IA64 core/thread detection patch [IA64] Increase max node count on SN platforms [IA64] Increase max node count on SN platforms [IA64] Increase max node count on SN platforms [IA64] Increase max node count on SN platforms [IA64] Tollhouse HP: IA64 arch changes [IA64] cleanup dig_irq_init [IA64] MCA recovery: kernel context recovery table IA64: Use early_parm to handle mvec_name and nomca [IA64] move patchlist and machvec into init section [IA64] add init declaration - nolwsys [IA64] add init declaration - gate page functions [IA64] add init declaration to memory initialization functions [IA64] add init declaration to cpu initialization functions [IA64] add __init declaration to mca functions [IA64] Ignore disabled Local SAPIC Affinity Structure in SRAT [IA64] sn_check_intr: use ia64_get_irr() [IA64] fix ia64 is_hugepage_only_range
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits) kbuild: remove obsoleted scripts/reference_* files kbuild: fix make help & make *pkg kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h Kconfig: remove the CONFIG_CC_ALIGN_* options kbuild: add -fverbose-asm to i386 Makefile kbuild: clean-up genksyms kbuild: Lindent genksyms.c kbuild: fix genksyms build error kbuild: in makefile.txt note that Makefile is preferred name for kbuild files kbuild: replace PHONY with FORCE kbuild: Fix bug in crc symbol generating of kernel and modules kbuild: change kbuild to not rely on incorrect GNU make behavior kbuild: when warning symbols exported twice now tell user this is the problem kbuild: fix make dir/file.xx when asm symlink is missing kbuild: in the section mismatch check try harder to find symbols kbuild: fix section mismatch check for unwind on IA64 kbuild: kill false positives from section mismatch warnings for powerpc kbuild: kill trailing whitespace in modpost & friends kbuild: small update of allnoconfig description kbuild: make namespace.pl CROSS_COMPILE happy ... Trivial conflict in arch/ppc/boot/Makefile manually fixed up
-
由 Nick Piggin 提交于
Hugh is rightly concerned that the CONFIG_DEBUG_VM coverage has gone too far in vm_normal_page, considering that we expect production kernels to be shipped with the option turned off, and that the code has been under some large changes recently. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Fix bug identified by Linus Torvalds <torvalds@osdl.org>: the `out' instruction depends upon the state of memory_data[], so we need to tell gcc that before executing it. (The opcode, not gcc). Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5553 Thanks to Antonio Ospite <ospite@studenti.unina.it> for testing. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits) BUG_ON() Conversion in drivers/video/ BUG_ON() Conversion in drivers/parisc/ BUG_ON() Conversion in drivers/block/ BUG_ON() Conversion in sound/sparc/cs4231.c BUG_ON() Conversion in drivers/s390/block/dasd.c BUG_ON() Conversion in lib/swiotlb.c BUG_ON() Conversion in kernel/cpu.c BUG_ON() Conversion in ipc/msg.c BUG_ON() Conversion in block/elevator.c BUG_ON() Conversion in fs/coda/ BUG_ON() Conversion in fs/binfmt_elf_fdpic.c BUG_ON() Conversion in input/serio/hil_mlc.c BUG_ON() Conversion in md/dm-hw-handler.c BUG_ON() Conversion in md/bitmap.c The comment describing how MS_ASYNC works in msync.c is confusing rcu: undeclared variable used in documentation fix typos "wich" -> "which" typo patch for fs/ufs/super.c Fix simple typos tabify drivers/char/Makefile ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Try to start getting SMP back into shape.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER] x_table.c: sem2mutex [IPV4]: Aggregate route entries with different TOS values [TCP]: Mark tcp_*mem[] __read_mostly. [TCP]: Set default max buffers from memory pool size [SCTP]: Fix up sctp_rcv return value [NET]: Take RTNL when unregistering notifier [WIRELESS]: Fix config dependencies. [NET]: Fill in a 32-bit hole in struct sock on 64-bit platforms. [NET]: Ensure device name passed to SO_BINDTODEVICE is NULL terminated. [MODULES]: Don't allow statically declared exports [BRIDGE]: Unaligned accesses in the ethernet bridge
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (3604): V4l printk fix V4L/DVB (3599c): Whitespace cleanups under Documentation/video4linux V4L/DVB (3599b): Whitespace cleanups under drivers/media V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video V4L/DVB (3599): Implement new routing commands for wm8775 and cs53l32a. V4L/DVB (3598): Add bit algorithm adapter for the Conexant CX2341X boards. V4L/DVB (3597): Vivi: fix warning: implicit declaration of function 'in_interrupt' V4L/DVB (3588): Remove VIDIOC_G/S_AUDOUT from msp3400 V4L/DVB (3587): Always wake thread after routing change. V4L/DVB (3584): Implement V4L2_TUNER_MODE_LANG1_LANG2 audio mode V4L/DVB (3582): Implement correct msp3400 input/output routing V4L/DVB (3581): Add new media/msp3400.h header containing the routing macros V4L/DVB (3580): Last round of msp3400 cleanups before adding routing commands V4L/DVB (3579): Move msp_modus to msp3400-kthreads, add JP and KR std detection V4L/DVB (3578): Make scart definitions easier to handle V4L/DVB (3577): Cleanup audio input handling V4L/DVB (3575): Cxusb: fix i2c debug messages for bluebird devices V4L/DVB (3574): Cxusb: fix debug messages V4L/DVB (3573): Cxusb: remove FIXME: comment in bluebird_patch_dvico_firmware_download V4L/DVB (3572): Cxusb: conditionalize gpio write for the medion box ...
-
由 Andrew Morton 提交于
drivers/scsi/sd.c: In function `sd_store_cache_type': drivers/scsi/sd.c:193: warning: comparison of distinct pointer types lacks a cast Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Thanks "Randy.Dunlap" <rdunlap@xenotime.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
This removes the support for pps. It's completely unused within the kernel and is basically in the way for further cleanups. It should be easier to readd proper support for it after the rest has been converted to NTP4 (where the pps mechanisms are quite different from NTP3 anyway). Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark A. Greer 提交于
Merge mpsc.h into mpsc.c because its the only file that #include's mpsc.h. Signed-off-by: NMark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark A. Greer 提交于
The definition of SUPPORT_SYSRQ must come before #include of serial_core.h. This patch moves the definition of SUPPORT_SYSRQ to be just after the #include of config.h to make it consistent with 8250.c. Reported-by: NStephane Chazelas <Stephane@artesyncp.com> Signed-off-by: NMark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark A. Greer 提交于
The devname passed to request_irq() contained a '/' which is wrong. At a minimum, the '/' prevented the devname from showing up in /proc/irq/<irq>/<devname>. This patch replaces the '/' with a '-' to fixes that problem. Reported-by: NStephane Chazelas <Stephane@artesyncp.com> Signed-off-by: NMark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eugene Teo 提交于
'int dev' came out of an 'unsigned char *' - as such, it will not get a negative value. Thanks Valdis. Signed-off-by: NEugene Teo <eugene.teo@eugeneteo.net> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Luke Yang 提交于
In binfmt_flat.c, the flat binary loader should check file descriptor table and install the fd on the file. Convert the function to single-exit and fix this bug. Signed-off-by: N"Luke Yang" <luke.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dimitri Sivanich 提交于
Add support for SA_PERCPU_IRQ (only mmtimer.c uses this at this stage). Signed-off-by: NDimitri Sivanich <sivanich@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Carsten Otte 提交于
nr_segs is unsigned long and thus cannot be negative. We checked against 0 few lines before. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Carsten Otte 提交于
Local variable i is unsigned int and thus cannot be negative. (akpm: unsigneds shouldn't be called `i'. This value cannot possibly be negative anyway). Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix Documentation/firmware_class/ examples so that they will build. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch removes duplicate definitions from include/linux/udf_fs_i.h which are already defined in fs/udf/ecma_167.h. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Dumazet 提交于
This patch avoids arithmetic on 'signed' types that are slower than 'unsigned'. This saves space and cpu cycles. size of kernel/sys.o before the patch (gcc-3.4.5) text data bss dec hex filename 10924 252 4 11180 2bac kernel/sys.o size of kernel/sys.o after the patch text data bss dec hex filename 10903 252 4 11159 2b97 kernel/sys.o I noticed that gcc-4.1.0 (from Fedora Core 5) even uses idiv instruction for (a+b)/2 if a and b are signed. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ashok Raj 提交于
- Moved check for online cpu out of smp_prepare_cpu() - Moved default declaration of smp_prepare_cpu() to kernel/cpu.c - Removed lock_cpu_hotplug() from smp_prepare_cpu() to around it, since its called from cpu_up() as well now. - Removed clearing from cpu_present_map during cpu_offline as it breaks using cpu_up() directly during a subsequent online operation. Signed-off-by: NAshok Raj <ashok.raj@intel.com> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Add info on flow control for serial consoles. Refer to netconsole option also. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chen, Kenneth W 提交于
There is a bug in direct-io on propagating write error up to the higher I/O layer. When performing an async ODIRECT write to a block device, if a device error occurred (like media error or disk is pulled), the error code is only propagated from device driver to the DIO layer. The error code stops at finished_one_bio(). The aysnc write, however, is supposedly have a corresponding AIO event with appropriate return code (in this case -EIO). Application which waits on the async write event, will hang forever since such AIO event is lost forever (if such app did not use the timeout option in io_getevents call. Regardless, an AIO event is lost). The discovery of above bug leads to another discovery of potential race window with dio->result. The fundamental problem is that dio->result is overloaded with dual use: an indicator of fall back path for partial dio write, and an error indicator used in the I/O completion path. In the event of device error, the setting of -EIO to dio->result clashes with value used to track partial write that activates the fall back path. It was also pointed out that it is impossible to use dio->result to track partial write and at the same time to track error returned from device driver. Because direct_io_work can only determines whether it is a partial write at the end of io submission and in mid stream of those io submission, a return code could be coming back from the driver. Thus messing up all the subsequent logic. Proposed fix is to separating out error code returned by the IO completion path from partial IO submit tracking. A new variable is added to dio structure specifically to track io error returned in the completion path. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Acked-by: NZach Brown <zach.brown@oracle.com> Acked-by: NSuparna Bhattacharya <suparna@in.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Phillip Susi 提交于
As Pekka Enberg pointed out, with the if still following the else, you can still get a null uid written to the disk if you specify a default uid= without uid=forget. In other words, if the desktop user is uid=1000 and the mount option uid=1000 is given ( which is done on ubuntu automatically and probably other distributions that use hal ), then if any other user besides uid 1000 owns a file then a 0 will be written to the media as the owning uid instead. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Neukum 提交于
Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-