After hot-unplug a stressed disk, I found that rl->wait[] is not empty
while rl->count[] is empty and there are theads still sleeping on
get_request after the queue cleanup. With simple debug code, I found
there are exactly nr_sleep - nr_wakeup of theads in D state. So there
are missed wakeup.

  $ dmesg | grep nr_sleep
  [   52.917115] ---> nr_sleep=1046, nr_wakeup=873, delta=173
  $ vmstat 1
  1 173  0 712640  24292  96172 0 0  0  0  419  757  0  0  0 100  0

To quote Tejun:

  Ah, okay, freed_request() wakes up single waiter with the assumption
  that after the wakeup there will at least be one successful allocation
  which in turn will continue the wakeup chain until the wait list is
  empty - ie. waiter wakeup is dependent on successful request
  allocation happening after each wakeup.  With queue marked dead, any
  woken up waiter fails the allocation path, so the wakeup chaining is
  lost and we're left with hung waiters. What we need is wake_up_all()
  after drain completion.

This patch fixes the missed wakeup by waking up all the theads which
are sleeping on wait queue after queue drain.

Changes in v2: Drop waitqueue_active() optimization
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NAsias He <asias@redhat.com>

Fixed a bug by me, where stacked devices would oops on calling
blk_drain_queue() since ->rq.wait[] do not get initialized unless
it's a full queue setup.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg_destroy() caches @blkg->q in local variable @q.  While there are
two places which needs @blkg->q, only lockdep_assert_held() used the
local variable leading to unused local variable warning if lockdep is
configured out.  Drop the local variable and just use @blkg->q
directly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NRakesh Iyer <rni@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When policy data allocation fails in the middle, blkg_alloc() invokes
blkg_free() to destroy the half constructed blkg.  This ends up
calling pd_exit_fn() on policy datas which didn't go through
pd_init_fn().  Fix it by making blkg_alloc() call pd_init_fn()
immediately after each policy data allocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq may be built w/ or w/o blkcg support depending on
CONFIG_CFQ_CGROUP_IOSCHED.  If blkcg support is disabled, most of
related code is ifdef'd out but some part is left dangling -
blkcg_policy_cfq is left zero-filled and blkcg_policy_[un]register()
calls are made on it.

Feeding zero filled policy to blkcg_policy_register() is incorrect and
triggers the following WARN_ON() if CONFIG_BLK_CGROUP &&
!CONFIG_CFQ_GROUP_IOSCHED.

 ------------[ cut here ]------------
 WARNING: at block/blk-cgroup.c:867
 Modules linked in:
 Modules linked in:
 CPU: 3 Not tainted 3.4.0-09547-gfb21affa #1
 Process swapper/0 (pid: 1, task: 000000003ff80000, ksp: 000000003ff7f8b8)
 Krnl PSW : 0704100180000000 00000000003d76ca (blkcg_policy_register+0xca/0xe0)
	    R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
 Krnl GPRS: 0000000000000000 00000000014b85ec 00000000014b85b0 0000000000000000
	    000000000096fb60 0000000000000000 00000000009a8e78 0000000000000048
	    000000000099c070 0000000000b6f000 0000000000000000 000000000099c0b8
	    00000000014b85b0 0000000000667580 000000003ff7fd98 000000003ff7fd70
 Krnl Code: 00000000003d76be: a7280001           lhi     %r2,1
	    00000000003d76c2: a7f4ffdf           brc     15,3d7680
	   #00000000003d76c6: a7f40001           brc     15,3d76c8
	   >00000000003d76ca: a7c8ffea           lhi     %r12,-22
	    00000000003d76ce: a7f4ffce           brc     15,3d766a
	    00000000003d76d2: a7f40001           brc     15,3d76d4
	    00000000003d76d6: a7c80000           lhi     %r12,0
	    00000000003d76da: a7f4ffc2           brc     15,3d765e
 Call Trace:
 ([<0000000000b6f000>] initcall_debug+0x0/0x4)
  [<0000000000989e8a>] cfq_init+0x62/0xd4
  [<00000000001000ba>] do_one_initcall+0x3a/0x170
  [<000000000096fb60>] kernel_init+0x214/0x2bc
  [<0000000000623202>] kernel_thread_starter+0x6/0xc
  [<00000000006231fc>] kernel_thread_starter+0x0/0xc
 no locks held by swapper/0/1.
 Last Breaking-Event-Address:
  [<00000000003d76c6>] blkcg_policy_register+0xc6/0xe0
 ---[ end trace b8ef4903fcbf9dd3 ]---

This patch fixes the problem by ensuring all blkcg support code is
inside CONFIG_CFQ_GROUP_IOSCHED.

* blkcg_policy_cfq declaration and blkg_to_cfqg() definition are moved
  inside the first CONFIG_CFQ_GROUP_IOSCHED block.  __maybe_unused is
  dropped from blkcg_policy_cfq decl.

* blkcg_deactivate_poilcy() invocation is moved inside ifdef.  This
  also makes the activation logic match cfq_init_queue().

* All blkcg_policy_[un]register() invocations are moved inside ifdef.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <20120601112954.GC3535@osiris.boeblingen.de.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq_init() would return zero after kmem cache creation failure.  Fix
so that it returns -ENOMEM.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Calling get_task_io_context() on a exiting task which isn't %current can
loop forever. This triggers at boot time on my dev machine.

BUG: soft lockup - CPU#3 stuck for 22s ! [mountall.1603]

Fix this by making create_task_io_context() returns -EBUSY in this case
to break the loop.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

tg_stats_alloc_lock nests inside queue lock and should always be held
with irq disabled.  throtl_pd_{init|exit}() were using non-irqsafe
spinlock ops which triggered inverse lock ordering via irq warning via
RCU freeing of blkg invoking throtl_pd_exit() w/o disabling IRQ.

Update both functions to use irq safe operations.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
LKML-Reference: <1335339396.16988.80.camel@lappy>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To avoid confusion while formatting a DASD device change the level of
the "Expected VOL1 label not found" message from warning to info.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

6d1d8050 "block, partition: add partition_meta_info to hd_struct"
added part_unpack_uuid() which assumes that the passed in buffer has
enough space for sprintfing "%pU" - 37 characters including '\0'.

Unfortunately, b5af921e "init: add support for root devices
specified by partition UUID" supplied 33 bytes buffer to the function
leading to the following panic with stackprotector enabled.

  Kernel panic - not syncing: stack-protector: Kernel stack corrupted in: ffffffff81b14c7e

  [<ffffffff815e226b>] panic+0xba/0x1c6
  [<ffffffff81b14c7e>] ? printk_all_partitions+0x259/0x26xb
  [<ffffffff810566bb>] __stack_chk_fail+0x1b/0x20
  [<ffffffff81b15c7e>] printk_all_paritions+0x259/0x26xb
  [<ffffffff81aedfe0>] mount_block_root+0x1bc/0x27f
  [<ffffffff81aee0fa>] mount_root+0x57/0x5b
  [<ffffffff81aee23b>] prepare_namespace+0x13d/0x176
  [<ffffffff8107eec0>] ? release_tgcred.isra.4+0x330/0x30
  [<ffffffff81aedd60>] kernel_init+0x155/0x15a
  [<ffffffff81087b97>] ? schedule_tail+0x27/0xb0
  [<ffffffff815f4d24>] kernel_thread_helper+0x5/0x10
  [<ffffffff81aedc0b>] ? start_kernel+0x3c5/0x3c5
  [<ffffffff815f4d20>] ? gs_change+0x13/0x13

Increase the buffer size, remove the dangerous part_unpack_uuid() and
use snprintf() directly from printk_all_partitions().
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NSzymon Gruszczynski <sz.gruszczynski@googlemail.com>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg lookup is currently performed by traversing linked list anchored
at blkcg->blkg_list.  This is very unscalable and with blk-throttle
enabled and enough request queues on the system, this can get very
ugly quickly (blk-throttle performs look up on every bio submission).

This patch makes blkcg use radix tree to index blkgs combined with
simple last-looked-up hint.  This is mostly identical to how icqs are
indexed from ioc.

Note that because __blkg_lookup() may be invoked without holding queue
lock, hint is only updated from __blkg_lookup_create().  Due to cfq's
cfqq caching, this makes hint updates overly lazy.  This will be
improved with scheduled blkcg aware request allocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

__blkg_lookup_create() leaked blkcg->css ref if blkg allocation
failed.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Request allocation is mempool backed to guarantee forward progress
under memory pressure; unfortunately, this property got broken while
adding elvpriv data.  Failures during elvpriv allocation, including
ioc and icq creation failures, currently make get_request() fail as
whole.  There's no forward progress guarantee for these allocations -
they may fail indefinitely under memory pressure stalling IO and
deadlocking the system.

This patch updates get_request() such that elvpriv allocation failure
doesn't make the whole function fail.  If elvpriv allocation fails,
the allocation is degraded into !ELVPRIV.  This will force the request
to ELEVATOR_INSERT_BACK disturbing scheduling but elvpriv alloc
failures should be rare (nothing is per-request) and anything is
better than deadlocking.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Allocation failure handling in get_request() is about to be updated.
To ease the update, collapse blk_alloc_request() into get_request().

This patch doesn't introduce any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's no reason to keep blkcg_policy_ops separate.  Collapse it into
blkcg_policy.

This patch doesn't introduce any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently blkg_policy_data carries policy specific data as char flex
array instead of being embedded in policy specific data.  This was
forced by oddities around blkg allocation which are all gone now.

This patch makes blkg_policy_data embedded in policy specific data -
throtl_grp and cfq_group so that it's more conventional and consistent
with how io_cq is handled.

* blkcg_policy->pdata_size is renamed to ->pd_size.

* Functions which used to take void *pdata now takes struct
  blkg_policy_data *pd.

* blkg_to_pdata/pdata_to_blkg() updated to blkg_to_pd/pd_to_blkg().

* Dummy struct blkg_policy_data definition added.  Dummy
  pdata_to_blkg() definition was unused and inconsistent with the
  non-dummy version - correct dummy pd_to_blkg() added.

* throtl and cfq updated accordingly.

* As dummy blkg_to_pd/pd_to_blkg() are provided,
  blkg_to_cfqg/cfqg_to_blkg() don't need to be ifdef'd.  Moved outside
  ifdef block.

This patch doesn't introduce any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

During the recent blkcg cleanup, most of blkcg API has changed to such
extent that mass renaming wouldn't cause any noticeable pain.  Take
the chance and cleanup the naming.

* Rename blkio_cgroup to blkcg.

* Drop blkio / blkiocg prefixes and consistently use blkcg.

* Rename blkio_group to blkcg_gq, which is consistent with io_cq but
  keep the blkg prefix / variable name.

* Rename policy method type and field names to signify they're dealing
  with policy data.

* Rename blkio_policy_type to blkcg_policy.

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Update indentation on struct field declarations.

* Uniformly don't use "extern" on function declarations.

* Merge the two #ifdef CONFIG_BLK_CGROUP blocks.

All changes in this patch are cosmetic.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkio_group->path[] stores the path of the associated cgroup and is
used only for debug messages.  Just format the path from blkg->cgroup
when printing debug messages.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg_rwstat_read() in blk-cgroup.h was missing inline modifier causing
compile warning depending on configuration.  Add it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's no reason to keep blkgs around if no policy is activated for
the queue.  This patch moves queue locking out of blkg_destroy_all()
and call it from blkg_deactivate_policy() on deactivation of the last
policy on the queue.

This change was suggested by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* All_q_list is unused.  Drop all_q_{mutex|list}.

* @for_root of blkg_lookup_create() is always %false when called from
  outside blk-cgroup.c proper.  Factor out __blkg_lookup_create() so
  that it doesn't check whether @q is bypassing and use the
  underscored version for the @for_root callsite.

* blkg_destroy_all() is used only from blkcg proper and @destroy_root
  is always %true.  Make it static and drop @destroy_root.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All blkcg policies were assumed to be enabled on all request_queues.
Due to various implementation obstacles, during the recent blkcg core
updates, this was temporarily implemented as shooting down all !root
blkgs on elevator switch and policy [de]registration combined with
half-broken in-place root blkg updates.  In addition to being buggy
and racy, this meant losing all blkcg configurations across those
events.

Now that blkcg is cleaned up enough, this patch replaces the temporary
implementation with proper per-queue policy activation.  Each blkcg
policy should call the new blkcg_[de]activate_policy() to enable and
disable the policy on a specific queue.  blkcg_activate_policy()
allocates and installs policy data for the policy for all existing
blkgs.  blkcg_deactivate_policy() does the reverse.  If a policy is
not enabled for a given queue, blkg printing / config functions skip
the respective blkg for the queue.

blkcg_activate_policy() also takes care of root blkg creation, and
cfq_init_queue() and blk_throtl_init() are updated accordingly.

This replaces blkcg_bypass_{start|end}() and update_root_blkg_pd()
unnecessary.  Dropped.

v2: cfq_init_queue() was returning uninitialized @ret on root_group
    alloc failure if !CONFIG_CFQ_GROUP_IOSCHED.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With per-queue policy activation, root blkg creation will be moved to
blkcg core.  Add q->root_blkg in preparation.  For blk-throtl, this
replaces throtl_data->root_tg; however, cfq needs to keep
cfqd->root_group for !CONFIG_CFQ_GROUP_IOSCHED.

This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the previous change to guarantee bypass visiblity for RCU read
lock regions, entering bypass mode involves non-trivial overhead and
future changes are scheduled to make use of bypass mode during init
path.  Combined it may end up adding noticeable delay during boot.

This patch makes request_queue start its life in bypass mode, which is
ended on queue init completion at the end of
blk_init_allocated_queue(), and updates blk_queue_bypass_start() such
that draining and RCU synchronization are performed only when the
queue actually enters bypass mode.

This avoids unnecessarily switching in and out of bypass mode during
init avoiding the overhead and any nasty surprises which may step from
leaving bypass mode on half-initialized queues.

The boot time overhead was pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg_lookup() doesn't check @q bypass state.  This patch
updates blk_queue_bypass_start() to do synchronize_rcu() before
returning and updates blkg_lookup() to check blk_queue_bypass() and
return %NULL if bypassing.  This ensures blkg_lookup() returns %NULL
if @q is bypassing.

This is to guarantee that nobody is accessing policy data while @q is
bypassing, which is necessary to allow replacing blkio_cgroup->pd[] in
place on policy [de]activation.

v2: Added more comments explaining bypass guarantees as suggested by
    Vivek.

v3: Added more comments explaining why there's no synchronize_rcu() in
    blk_cleanup_queue() as suggested by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add @pol to blkg_conf_prep() and let it return with queue lock held
(to be released by blkg_conf_finish()).  Note that @pol isn't used
yet.

This is to prepare for per-queue policy activation and doesn't cause
any visible difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove BLKIO_POLICY_* enums and let blkio_policy_register() allocate
@pol->plid dynamically on registration.  The maximum number of blkcg
policies which can be registered at the same time is defined by
BLKCG_MAX_POLS constant added to include/linux/blkdev.h.

Note that blkio_policy_register() now may fail.  Policy init functions
updated accordingly and unnecessary ifdefs removed from cfq_init().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The two functions were taking "enum blkio_policy_id plid".  Make them
take "const struct blkio_policy_type *pol" instead.

This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With blkio_policy[], blkio_list is redundant and hinders with
per-queue policy activation.  Remove it.  Also, replace
blkio_list_lock with a mutex blkcg_pol_mutex and let it protect the
whole [un]registration.

This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* CFQ_WEIGHT_* defined inside CONFIG_BLK_CGROUP causes cfq-iosched.c
  compile failure when the config is disabled.  Move it outside the
  ifdef block.

* Dummy cfqg_stats_*() definitions were lacking inline modifiers
  causing unused functions warning if !CONFIG_CFQ_GROUP_IOSCHED.  Add
  them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We do auto block plug flush to reduce latency, the threshold is 16
requests. This works well if the task is accessing one or two drives.
The problem is if the task is accessing a raid 0 device and the raid
disk number is big, say 8 or 16, 16/8 = 2 or 16/16=1, we will have
heavy lock contention.

This patch makes the threshold per-disk based. The latency should be
still ok accessing one or two drives. The setup with application
accessing a lot of drives in the meantime uaually is big machine,
avoiding lock contention is more important, because any contention
will actually increase latency.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that all stat handling code lives in policy implementations,
there's no need to encode policy ID in cft->private.

* Export blkcg_prfill_[rw]stat() from blkcg, remove
  blkcg_print_[rw]stat(), and implement cfqg_print_[rw]stat() which
  use hard-code BLKIO_POLICY_PROP.

* Use cft->private for offset of the target field directly and drop
  BLKCG_STAT_{PRIV|POL|OFF}().
Signed-off-by: NTejun Heo <tj@kernel.org>

Now that all conf and stat fields are moved into policy specific
blkio_policy_data->pdata areas, there's no reason to use
blkio_policy_data itself in prfill functions.  Pass around @pd->pdata
instead of @pd.
Signed-off-by: NTejun Heo <tj@kernel.org>

blkio_cgroup_conf->iops and ->bps are owned by blk-throttle and has no
reason to be defined in blkcg core.  Drop them and let conf setting
functions directly manipulate throtl_grp->bps[] and ->iops[].

This makes blkio_group_conf empty.  Drop it.
Signed-off-by: NTejun Heo <tj@kernel.org>

blkio_group_conf->weight is owned by cfq and has no reason to be
defined in blkcg core.  Replace it with cfq_group->dev_weight and let
conf setting functions directly set it.  If dev_weight is zero, the
cfqg doesn't have device specific weight configured.

Also, rename BLKIO_WEIGHT_* constants to CFQ_WEIGHT_* and rename
blkio_cgroup->weight to blkio_cgroup->cfq_weight.  We eventually want
per-policy storage in blkio_cgroup but just mark the ownership of the
field for now.
Signed-off-by: NTejun Heo <tj@kernel.org>

blkio_group_stats_cpu is used only by blk-throtl and has no reason to
be defined in blkcg core.

* Move blkio_group_stats_cpu to blk-throttle.c and rename it to
  tg_stats_cpu.

* blkg_policy_data->stats_cpu is replaced with throtl_grp->stats_cpu.
  prfill functions updated accordingly.

* All related macros / functions are renamed so that they have tg_
  prefix and the unnecessary @pol arguments are dropped.

* Per-cpu stats allocation code is also moved from blk-cgroup.c to
  blk-throttle.c and gets simplified to only deal with
  BLKIO_POLICY_THROTL.  percpu stat free is performed by the exit
  method throtl_exit_blkio_group().

* throtl_reset_group_stats() implemented for
  blkio_reset_group_stats_fn method so that tg->stats_cpu can be
  reset.
Signed-off-by: NTejun Heo <tj@kernel.org>

blkio_group_stats contains only fields used by cfq and has no reason
to be defined in blkcg core.

* Move blkio_group_stats to cfq-iosched.c and rename it to cfqg_stats.

* blkg_policy_data->stats is replaced with cfq_group->stats.
  blkg_prfill_[rw]stat() are updated to use offset against pd->pdata
  instead.

* All related macros / functions are renamed so that they have cfqg_
  prefix and the unnecessary @pol arguments are dropped.

* All stat functions now take cfq_group * instead of blkio_group *.

* lockdep assertion on queue lock dropped.  Elevator runs under queue
  lock by default.  There isn't much to be gained by adding lockdep
  assertions at stat function level.

* cfqg_stats_reset() implemented for blkio_reset_group_stats_fn method
  so that cfqg->stats can be reset.
Signed-off-by: NTejun Heo <tj@kernel.org>

Add blkio_policy_ops->blkio_exit_group_fn() and
->blkio_reset_group_stats_fn().  These will be used to further
modularize blkcg policy implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>

blkio_group_stats_cpu is used to count dispatch stats using per-cpu
counters.  This is used by both blk-throtl and cfq-iosched but the
sharing is rather silly.

* cfq-iosched doesn't need per-cpu dispatch stats.  cfq always updates
  those stats while holding queue_lock.

* blk-throtl needs per-cpu dispatch stats but only service_bytes and
  serviced.  It doesn't make use of sectors.

This patch makes cfq add and use global stats for service_bytes,
serviced and sectors, removes per-cpu sectors counter and moves
per-cpu stat printing code to blk-throttle.c.
Signed-off-by: NTejun Heo <tj@kernel.org>

As with conf/stats file handling code, there's no reason for stat
update code to live in blkcg core with policies calling into update
them.  The current organization is both inflexible and complex.

This patch moves stat update code to specific policies.  All
blkiocg_update_*_stats() functions which deal with BLKIO_POLICY_PROP
stats are collapsed into their cfq_blkiocg_update_*_stats()
counterparts.  blkiocg_update_dispatch_stats() is used by both
policies and duplicated as throtl_update_dispatch_stats() and
cfq_blkiocg_update_dispatch_stats().  This will be cleaned up later.
Signed-off-by: NTejun Heo <tj@kernel.org>