Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Commit 7b96dc02 ("[SPARC] Videopix Frame
Grabber: Convert device_lock_sem to mutex") missed one place.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix build break:

drivers/net/tsi108_eth.c: In function 'tsi108_init_one':
drivers/net/tsi108_eth.c:1633: error: expected ')' before 'dev'
drivers/net/tsi108_eth.c:1633: warning: too few arguments for format
make[2]: *** [drivers/net/tsi108_eth.o] Error 1
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove qeth bug caused by commit:
[NET]: Move hardware header operations out of netdevice.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[bugme-daemon@bugzilla.kernel.org wrote:]

From: Randy Dunlap <randy.dunlap@oracle.com>

Drivers that use lro functions should depend on INET, otherwise they
may not link correctly.  Let's not select INET.  Select should be used
only for library-like code, not to enable subsystems.

ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined!
ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

- make the kconfig NAPI option prompt consistent across all net drivers
  (other than EXPERIMENTAL; can it now be removed also, or is the new
  napi_struct implementation now EXPERIMENTAL ?)
- remove comment about the now-deleted NAPI_HOWTO.txt file
- clean up typos in Tulip NAPI & Interrupt Mitigation
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Missing MODULE_LICENSE(), loading this module taints the kernel.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

DM9000 driver returns success even if it is failed to detect the chip.
Below patch fixes it.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>

 drivers/net/dm9000.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

sata_sis has the same restrictions as other SFF controllers, and so must
use LIBATA_MAX_PRD to denote that SCSI may only fill ATA_MAX_PRD/2
entries, due to our need to handle IOMMU merging.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* Fix out-of-bound array access for MWDMA modes.

* Bump driver version.

Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

SCR read for controllers which uses PCI configuration space for SCR
access got broken while adding @val argument to SCR accessors.  Fix
it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix libata kernel-doc parameter name.

Warning(linux-2.6.23-git13//drivers/ata/libata-core.c:1415): No description found for parameter 'sgl'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Typo: depricated -> deprecated
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NMasatake YAMATO <jet@gyve.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Add crypt prefix to dec_pending to avoid confusing it in backtraces with
the dm core function of the same name.

No functional change here.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds calls to dm_path_event for a failed path and a reinstated
path.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds support for the dm_path_event dm_send_event functions which
create and send udev events.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a uevent skeleton to device-mapper.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a function to obtain a copy of a mapped device's name and uuid.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Store a pointer to the owning mirror_set structure within each mirror
structure for a subsequent patch to use.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There are now two phases to a suspend in device-mapper -
presuspend and postsuspend.  This patch removes the
single 'suspend' in the logging API and replaces it with
'presuspend' and 'postsuspend' functions to align it
better with core device-mapper.

A subsequent patch will make use of 'presuspend'.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds retries to the hp hardware handler, and utilizes the
MP_RETRY flag of dm-multipath.  For now in the hp handler, if we get a
pg_init completed with a check condition we just assume we can retry the
pg_init command.  We make this assumption because of incomplete data on
specific check condition code of the HP hardware, and because testing
has shown the HP path initialization command to be idempotent.
The number of times we retry is settable via the "pg_init_retries"
multipath map feature.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds the most basic dm-multipath hardware support for the
HP active/passive arrays.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch allows a failed path group initialisation command to be retried.

It adds a generic MP_RETRY flag and a "pg_init_retries" feature to
device-mapper multipath which limits the number of retries.

1. A hw handler sends a path initialization command to the storage and
the command completes with an error code indicating the command
should be retried.

2. The hardware handler calls dm_pg_init_complete() with MP_RETRY
set in err_flags to ask the dm multipath core to retry.

3. If the retry limit has not been exceeded, pg_init() is retried.
Otherwise fail_path() is called.

If you are using the userspace multipath-tools or device-mapper-multipath
package, you can set pg_init_retries in the 'device' section of your
/etc/multipath.conf file. For example:

features                "2 pg_init_retries 7"

The number of PG retries attempted is reported in the 'dmsetup status' output.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Acked-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace numbers with names in labels in error paths, to avoid confusion
when new one get added between existing ones.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Clean up, convert some spaces to tabs.

No functional change here.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add post-processing queue (per crypt device) for read operations.

Current implementation uses only one queue for all operations
and this can lead to starvation caused by many requests waiting
for memory allocation. But the needed memory-releasing operation
is queued after these requests (in the same queue).
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use a separate single-threaded workqueue for each crypt device
instead of one global workqueue.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Correct an error message, reported by Michael Wood <michael@frogfoot.com>.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove BIO_LIST and DEFINE_BIO_LIST macros that gain us nothing
since contents are initialised to NULL.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

In drivers/md/dm-ioctl.c::copy_params() there's a call to vmalloc()
where we currently cast the return value, but that's pretty pointless
given that vmalloc() returns "void *".
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use bio_io_error() in only two places and tidy the code,
preparing for later patches.

There is no functional change in this patch.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Kcopyd uses a semaphore as mutex.  Use the mutex API instead of the (binary)
semaphore,
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Convert kmalloc() + memset() to kzalloc().
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: Nvignesh babu <vignesh.babu@wipro.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch fixes a bd_mount_sem counter corruption bug in device-mapper.

thaw_bdev() should be called only when freeze_bdev() was called for the
device.
Otherwise, thaw_bdev() will up bd_mount_sem and corrupt the semaphore counter.
struct block_device with the corrupted semaphore may remain in slab cache
and be reused later.

Attached patch will fix it by calling unlock_fs() instead.
unlock_fs() will determine whether it should call thaw_bdev()
by checking the device is frozen or not.

Easy reproducer is:
  #!/bin/sh
  while [ 1 ]; do
     dmsetup --notable create a
     dmsetup --nolockfs suspend a
     dmsetup remove a
  done

It's not easy to see the effect of corrupted semaphore.
So I have tested with putting printk below in bdev_alloc_inode():
        if (atomic_read(&ei->bdev.bd_mount_sem.count) != 1)
                printk(KERN_DEBUG "Incorrect semaphore count = %d (%p)\n",
                        atomic_read(&ei->bdev.bd_mount_sem.count),
                        &ei->bdev);

Without the patch, I saw something like:
 Incorrect semaphore count = 17 (f2ab91c0)

With the patch, the message didn't appear.

The bug was introduced in 2.6.16 with this bug fix:

commit d9dde59b
Date:   Fri Feb 24 13:04:24 2006 -0800

    [PATCH] dm: missing bdput/thaw_bdev at removal

    Need to unfreeze and release bdev otherwise the bdev inode with
    inconsistent state is reused later and cause problem.

and backported to 2.6.15.5.

It occurs only in free_dev(), which is called only when the dm device is
removed.  The buggy code is executed only if md->suspended_bdev is
non-NULL and that can happen only when the device was suspended without
noflush.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: stable@kernel.org

Fix missing space in dm-delay target status output
if separate read and write delay are configured.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add missing 'dm_put_device' to dm-delay target constructor.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add missing 'dm_io_client_destroy' to alloc_context error path.
Reorganize mirror constructor error path in order to prevent
workqueue leakage.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>