- 11 12月, 2008 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch PCI: stop leaking 'slot_name' in pci_create_slot
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN: prevent IRQ retargetting in request_irq() [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule [IA64] Clear up section mismatch for ioc4_ide_attach_one. [IA64] Clear up section mismatch with arch_unregister_cpu() [IA64] Clear up section mismatch for sn_check_wars. [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE [IA64] eliminate NULL test and memset after alloc_bootmem [IA64] remove BUILD_BUG_ON from paravirt_getreg()
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Better than nothing implementation of PCI mmap to fix X.
-
由 Kay Sievers 提交于
The pktcdvd created class devices only export some sysfs files, but have no char dev_t registered in the driver. At class device creation time they copy the dev_t value of the block device to the char device, wich will register a new char device in the driver core and userspace, with a conflicting dev_t value. In many cases the class devices dev_t just points to a random USB device. This fixes the sysfs "duplicate entry" errors. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Acked-by: NPeter Osterlund <petero2@telia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-ohci: fix IOMMU resource exhaustion ieee1394: node manager causes up to ~3.25s delay in freezing tasks
-
由 Andrew Morton 提交于
sparc64: drivers/video/mb862xx/mb862xxfb.c:929: warning: long long unsigned int format, resource_size_t arg (arg 4) drivers/video/mb862xx/mb862xxfb.c:931: warning: long long unsigned int format, resource_size_t arg (arg 4) We don't know what type the architecture uses to implement u64, hence they cannot be printed. Cc: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked to my 966c8c12 sprint_symbol(): use less stack exposing a bug in slub's list_locations() - kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was beyond the end of page provided. The 100 slop which list_locations() allows at end of page looks roughly enough for all the other stuff it might print after the symbol before it checks again: break out KSYM_SYMBOL_LEN earlier than before. Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies them. [akpm@linux-foundation.org: ftrace.h needs module.h] Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc Miles Lane <miles.lane@gmail.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NSteven Rostedt <srostedt@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitri Monakhov 提交于
On umount two event will be dispatched to watcher: 1: inotify_dev_queue_event(.., IN_UNMOUNT,..) 2: remove_watch(watch, dev) ->inotify_dev_queue_event(.., IN_IGNORED, ..) But if watcher has IN_ONESHOT bit set then the watcher will be released inside first event. Which result in accessing invalid object later. IMHO it is not pure regression. This bug wasn't triggered while initial inotify interface testing phase because of another bug in IN_ONESHOT handling logic :) commit ac74c00e Author: Ulisses Furquim <ulissesf@gmail.com> Date: Fri Feb 8 04:18:16 2008 -0800 inotify: fix check for one-shot watches before destroying them As the IN_ONESHOT bit is never set when an event is sent we must check it in the watch's mask and not in the event's mask. TESTCASE: mkdir mnt mount -ttmpfs none mnt mkdir mnt/d ./inotify mnt/d& umount mnt ## << lockup or crash here TESTSOURCE: /* gcc -oinotify inotify.c */ #include <stdio.h> #include <stdlib.h> #include <sys/inotify.h> int main(int argc, char **argv) { char buf[1024]; struct inotify_event *ie; char *p; int i; ssize_t l; p = argv[1]; i = inotify_init(); inotify_add_watch(i, p, ~0); l = read(i, buf, sizeof(buf)); printf("read %d bytes\n", l); ie = (struct inotify_event *) buf; printf("event mask: %d\n", ie->mask); return 0; } Signed-off-by: NDmitri Monakhov <dmonakhov@openvz.org> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Robert Love <rlove@google.com> Cc: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
atomic_long_xchg() is not correctly defined for 32bit arches. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Brice Goglin 提交于
Since commit 2f007e74, do_pages_stat() gets the page address from user-space and puts the corresponding status back while holding the mmap_sem for read. There is no need to hold mmap_sem there while some page-faults may occur. This patch adds a temporary address and status buffer so as to only hold mmap_sem while working on these kernel buffers. This is implemented by extracting do_pages_stat_array() out of do_pages_stat(). Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr> Cc: Christoph Lameter <clameter@sgi.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Balaji Rao 提交于
Signed-off-by: NBalaji Rao <balajirrao@gmail.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mackall 提交于
The large pages fix from bcf8039e broke 32-bit pagemap by pulling the pagemap entry code out into a function with the wrong return type. Pagemap entries are 64 bits on all systems and unsigned long is only 32 bits on 32-bit systems. Signed-off-by: NMatt Mackall <mpm@selenic.com> Reported-by: NDoug Graham <dgraham@nortel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.26.x, 2.6.27.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
Fix a total bootup freeze on ia64. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: NLi Zefan <lizf@cn.fujitsu.com> Reported-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix build error when RTC_INTF_DEV=n: drivers/rtc/rtc-twl4030.c:402: error: 'twl4030_rtc_ioctl' undeclared here (not in a function) make[3]: *** [drivers/rtc/rtc-twl4030.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geoff Levand 提交于
Add a call to cancel_work_sync() in fbcon_exit() to cancel any pending work in the fbcon workqueue. The current implementation of fbcon_exit() sets the fbcon workqueue function info->queue.func to NULL, but does not assure that there is no work pending when it does so. On occasion, depending on system timing, there will still be pending work in the queue when fbcon_exit() is called. This results in a null pointer deference when run_workqueue() tries to call the queue's work function. Fixes errors on shutdown similar to these: Console: switching to colour dummy device 80x25 Unable to handle kernel paging request for data at address 0x00000000 Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
Currently, lru_add_drain_all() has two version. (1) use schedule_on_each_cpu() (2) don't use schedule_on_each_cpu() Gerald Schaefer reported it doesn't work well on SMP (not NUMA) S390 machine. offline_pages() calls lru_add_drain_all() followed by drain_all_pages(). While drain_all_pages() works on each cpu, lru_add_drain_all() only runs on the current cpu for architectures w/o CONFIG_NUMA. This let us run into the BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during memory hotplug stress test on s390. The page in question was still on the pcp list, because of a race with lru_add_drain_all() and drain_all_pages() on different cpus. Actually, Almost machine has CONFIG_UNEVICTABLE_LRU=y. Then almost machine use (1) version lru_add_drain_all although the machine is UP. Then this ifdef is not valueable. simple removing is better. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Revert commit e8ced39d Author: Mingming Cao <cmm@us.ibm.com> Date: Fri Jul 11 19:27:31 2008 -0400 percpu_counter: new function percpu_counter_sum_and_set As described in revert "percpu counter: clean up percpu_counter_sum_and_set()" the new percpu_counter_sum_and_set() is racy against updates to the cpu-local accumulators on other CPUs. Revert that change. This means that ext4 will be slow again. But correct. Reported-by: NEric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Revert commit 1f7c14c6 Author: Mingming Cao <cmm@us.ibm.com> Date: Thu Oct 9 12:50:59 2008 -0400 percpu counter: clean up percpu_counter_sum_and_set() Before this patch we had the following: percpu_counter_sum(): return the percpu_counter's value percpu_counter_sum_and_set(): return the percpu_counter's value, copying that value into the central value and zeroing the per-cpu counters before returning. After this patch, percpu_counter_sum_and_set() has gone, and percpu_counter_sum() gets the old percpu_counter_sum_and_set() functionality. Problem is, as Eric points out, the old percpu_counter_sum_and_set() functionality was racy and wrong. It zeroes out counters on "other" cpus, without holding any locks which will prevent races agaist updates from those other CPUS. This patch reverts 1f7c14c6. This means that percpu_counter_sum_and_set() still has the race, but percpu_counter_sum() does not. Note that this is not a simple revert - ext4 has since started using percpu_counter_sum() for its dirty_blocks counter as well. Note that this revert patch changes percpu_counter_sum() semantics. Before the patch, a call to percpu_counter_sum() will bring the counter's central counter mostly up-to-date, so a following percpu_counter_read() will return a close value. After this patch, a call to percpu_counter_sum() will leave the counter's central accumulator unaltered, so a subsequent call to percpu_counter_read() can now return a significantly inaccurate result. If there is any code in the tree which was introduced after e8ced39d was merged, and which depends upon the new percpu_counter_sum() semantics, that code will break. Reported-by: NEric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
We should first delete the counter from percpu_counters list before freeing memory, or a percpu_counter_hotcpu_callback() could dereference a NULL pointer. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alessandro Zummo 提交于
Add missing id_table to the drivers in subject. Patch is against the latest git. It should go in with 2.6.28 if possible, the drivers won't work without the id_table bits. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Reported-by: NImre Kaloz <kaloz@openwrt.org> Tested-by: NImre Kaloz <kaloz@openwrt.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tom Zanussi 提交于
Running kmemtraced, which uses splice() on relayfs, causes a hard lock on x86-64 SMP. As described by Tom Zanussi: It looks like you hit the same problem as described here: commit 8191ecd1 splice: fix infinite loop in generic_file_splice_read() relay uses the same loop but it never got noticed or fixed. Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Tested-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Balbir Singh 提交于
mconsole_init() passed 256 bytes as length in os_create_unix_socket, while the sizeof UNIX_PATH_MAX is 108. This patch fixes that problem and avoids a big overrun bug reported on UML bootup. sockaddr_un.sun_path is UNIX_PATH_MAX long which causes the problem. Reported-by: NVikas K Managutte <vikki.km@gmail.com> Reported-by: NSarvesh Kumar Lal Das <skldas@gmail.com> Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi> Reviewed-by: NWANG Cong <wangcong@zeuux.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> [please check with Jeff] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
On second thoughts, this is just going to disturb people while telling us things which we already knew. Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 12月, 2008 17 次提交
-
-
由 Stefan Richter 提交于
There is a DMA map/ unmap imbalance whenever a block write request packet is sent and then dequeued with ohci_cancel_packet. The latter may happen frequently if the AR resp tasklet is executed before the AT req tasklet for the same transaction. Add the missing dma_unmap_single. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=475156 Reported-by: Emmanuel Kowalski Tested-by: Emmanuel Kowalski Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Thomas Renninger 提交于
Makes a Compaq 6735s boot reliably again. It used to hang in the loop on some boots. Give the link one second to train, otherwise break out of the loop and reset the previously set clock bits. Cc: stable@vger.kernel.org Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Alex Chiang 提交于
In pci_create_slot(), the local variable 'slot_name' is allocated by make_slot_name(), but never freed. We never use it after passing it to the kobject core, so we should free it upon function exit. Cc: stable@kernel.org Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Ralf Baechle 提交于
Certain X11 servers such as the SIS server will only work if PCI mmap is implemented. This patch implements PCI mmap but to be on the same side so close to a release it only supports uncached mappings so performance will not be optimal for some uses such as framebuffers. Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and testing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Keller 提交于
With the introduction of the generic affinity autoselector, irq_select_affinity(), IRQs are now being retargetted, using a default mask, via the request_irq() path. This results in all IRQs targetted at CPU 0. SN Altix assigns affinity in the SN PROM, and does not expect that to be changed as part of request_irq(). Set the IRQ_AFFINITY_SET flag to prevent request_irq() from resetting affinity. Signed-off-by: NJohn Keller <jpk@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Nigel Cunningham 提交于
The firewire nodemanager function "nodemgr_host_thread" contains a loop that calls try_to_freeze near the top of the loop, but then delays for up to 3.25 seconds (plus time to do work) before getting back to the top of the loop. When starting a cycle post-boot, this doesn't seem to bite, but it is causing a noticeable delay at boot time, when freezing processes prior to starting to read the image. The following patch adds invocation of try_to_freeze to the subloops that are used in the body of this function. With these additions, the time to freeze when starting to resume at boot time is virtually zero. I'm no expert on firewire, and so don't know that we shouldn't check the return value and jump back to the top of the loop or such like after being frozen, but I submit it for your consideration. Signed-off-by: NNigel Cunningham <nigel@tuxonice.net> The delay until nodemgr freezes was up to 0.25s (plus time for node probes) in Linux 2.6.27 and older and up to 3.25s (plus ~) since Linux 2.6.28-rc1, hence much more noticeable. try_to_freeze() without any jump is correct. The surrounding code in the respective loops will catch whether another bus reset happens during the freeze and handle it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Tony Luck 提交于
s/ioc3uart_submodule/ioc3uart_ops/ makes the section mismatch check happy. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
The generic_defconfig has three section mismatches. This clears up ioc4_ide_attach_one(). Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NMike Reid <mdr@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
The generic_defconfig has three section mismatches. This clears arch_unregister_cpu() Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
The generic_defconfig has three section mismatches. This clears up sn_check_wars(). Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
The AUTOFS=y and AUTOFS4=y causes problems with some distros versions of automount. I turned both of those to =m and then followed the default prompts for everything else. I did notice that CONFIG_PNP_DEBUG got changed to CONFIG_PNP_DEBUG_MESSAGES and the default was a =y so I turned that back to a =n. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jack Steiner 提交于
Eliminate compile error when compiling without CONFIG_HUGETLB_PAGE. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Julia Lawall 提交于
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Alexey Dobriyan 提交于
CC arch/ia64/kernel/asm-offsets.s In file included from include/linux/bitops.h:17, from include/linux/kernel.h:15, from include/linux/sched.h:52, from arch/ia64/kernel/asm-offsets.c:9: arch/ia64/include/asm/bitops.h: In function 'set_bit': arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON' Obvious inclusion of kernel.h doesn't fix it, because of circular dependencies involving fls.h and log2(). Fixing the latter requires some serious header surgery, it seems, so just remove BUILD_BUG_ON for now. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix alignment fault handling for ARMv6 and later CPUs [ARM] 5340/1: fix stack placement after noexecstack changes [ARM] 5339/1: fix __fls() on ARM [ARM] Orion: fix bug in pcie configuration cycle function field mask [ARM] omap: fix a pile of issues
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2 [MTD] physmap: fix memory leak on physmap_flash_remove by using devres [MTD] m25p80: chip erase != block erase != sector erase [MTD] m25p80: fix detection of m25p16 flashes [MTD] m25p80: fix detection of SPI parts [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2) [MTD] [NAND] OMAP: OneNAND: header file relocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b59' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] fix broken timestamps in AVC generated by kernel threads [patch 1/1] audit: remove excess kernel-doc [PATCH] asm/generic: fix bug - kernel fails to build when enable some common audit code on Blackfin [PATCH] return records for fork() both to child and parent [PATCH] Audit: make audit=0 actually turn off audit
-