This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add initializer and deinitializer for debugfs support. This will later allow raw
eeprom access and direct DRM modifications to debug wiimote behaviour and
further protocol reverse-engineerings.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote supports several extensions. This adds a separate source file which
handles all extensions and can be disabled at compile-time.

The driver reacts on "plug"-events on the extension port and starts a worker
which initializes or deinitializes the extensions.

Currently, the initialization logic is not fully understood and we can only
detect and enable all extensions when all extensions are deactivated. Therefore,
we need to disable all extensions, then detect and activate them again to react
on "plug"-events.
However, deactivating extensions will generate a new "plug"-event and we will
never leave that loop. Hence, we only support extensions if they are plugged
before the wiimote is connected (or before the ext-input device is opened). In
the future we may support full extension hotplug support, but
reverse-engineering this may take a while.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Extension and sound support for the wiimote are quite complex and will be
implemented in separate source files. Hence rename the current driver to "-core"
suffix so multiple files can be linked into this module.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename the Kconfig entry for hyperv mouse driver so that it has
HID_ prefix as all the other drivers; while at it, place the entry
for this driver to properly ordered place in Makefile and Kconfig.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The file  hid-hyperv.c implements a hid compliant mouse driver for use on a
Hyper-V based system. This driver is currently in the staging area and as part
of the effort to move this driver out of staging, I had posted the driver code
for community review a few weeks ago. This current patch addresses all the
review comments I have gotten to date. All the relevant patches have already
been submitted to the staging tree as well.

As per Greg's suggestion, this patch does not get rid of the code from
the staging area. Once the mouse driver lands under the hid directory,
we will cleanup the staging directory.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Primax keyboards with the issue this driver addresses report modifier
keys as in band key events instead of as out of band modifier bits,
resulting in the modifier keys generating key up events immediately
before the keys they are intended to modify.  This driver rewrites
the raw report data from such keyboards into USB HID 1.11 compliant
report data.  It only matches the USB vendor and product IDs for the
keyboard it has been tested on. Since there are several keyboards,
notably a number of laptops and folding USB keyboards known to have
similar unresolved problem reports, the list is expected to grow.
Signed-off-by: NTerry Lambert <tlambert@chromium.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

With this driver, all the devices paired to a single Unifying
receiver are exposed to user processes in separated /input/dev
nodes.

Keyboards with different layouts can be treated differently,
Multiplayer games on single PC (like home theater PC) can
differentiate input coming from different kbds paired to the
same receiver.

Up to now, when Logitech Unifying receivers are connected to a
Linux based system, a single keyboard and a single mouse are
presented to the HID Layer, even if the Unifying receiver can
pair up to six compatible devices. The Unifying receiver by default
multiplexes all incoming events (from multiple keyboards/mice)
into these two.
Signed-off-by: NNestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF
Signed-off-by: NMichal Malý <madcatxster@gmail.com>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add force feedback support for Holtek On Line Grip based HID devices.

The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.

Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: NCleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored.  The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: NStefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch include MosArt devices into hid-multitouch.
MosArt devices now support mt-protocol B.

We also need to introduce a new quirk for mosart devices to support
their contactID.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merges the hid-3m-pct driver into hid-multitouch.
To keep devices working the same way they used to with hid-3m-pct,
we need to add two signal/noise ratios for width and height.
We also need to work on width/height to send proper
ABS_MT_ORIENTATION flag.

Importing 3M into hid-multitouch also solved the bug in which
devices handling width and height in their report descriptors
did not show ABS_MT_TOUCH_MAJOR and ABS_MT_TOUCH_MINOR.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: NStéphane Chatty <chatty@enac.fr>
Reviewed-and-tested-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merges hid-cando into the unified multitouch driver.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: NStéphane Chatty <chatty@enac.fr>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merges hid-stantum to the generic multitouch driver.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: NStéphane Chatty <chatty@enac.fr>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch merges the hid-egalax driver into hid-multitouch.  There
are two types of devices support by the hid-egalax driver: resistive
and capacitive. Here, they are implicitly distinguished by the absence
of a HID_DG_CONTACTCOUNT field in the latter, so no special code path
needs to be introduced.

As a side effect, this patch fixes the broken suspend/resume behavior
in the old driver.

[rydberg@euromail.se: minor fixups]
Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device does not tolerate delayed opening and goes into a coma if
we try to that. Ubuntu even has a crutch for udev that opened the device
upon seeing it for the first time, but it did not work if we happened to
boot with the device attached, since by the time userspace got around
opening the device it was too late. Let's start the device immediately
to deal with this issue.
Reported-by: NSergei Kolzun <x0r@dv-life.ru>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The keyboard has several bugs in its report descriptor, most
importantly the Logical Min/Max are completely off.

Replace it with simplified descriptor which describes it properly.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NChris Schlund <chrisschlund@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for Roccat Kova[+] mouse.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Module hid-roccat-common contains functions used by roccat device driver
modules to reduce code duplication.
At the moment it contains just two wrapper methods for usb_control_msg
that ensure that the buffer used for transfer is dma capable which wasn't
the case before.
The kconfig option is not visible to the user but will be selected by the
device specific drivers.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename drivers/hid/hid-drff.c (a DragonRise Inc. force feedback gamepad driver)
to driver/hid/hid-dr.c.

This prepares it for addition of support for another gamepad, without force
feedback.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch add support for Roccat Arvo keyboard. Arvo has 5 additional
configurable buttons and the ability to deactivate certain keys.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Created a driver for PixCir based dual-touch panels, including the one
in the Hanvon tablet.  This is done in a code structure aimed at unifying
support for several existing HID multitouch panels.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for Roccat Kone[+] gaming mouse. Kone[+] is an enhanced version
of the old Kone with more memory for macros, a better sensor and more functionality.
This driver is conceptual similar to the existing Kone and Pyra drivers.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device has connections for GameCube, PlayStation 2 and Dreamcast
controllers, however Force Feedback is only supported for PS2 and GC
controllers.

When using a PS2 controller it may be necessary to press the "Analog" button to
enable support for both motors (this behavior is identical to the Windows
driver, I have found no way to avoid that).
Signed-off-by: NIgnaz Forster <ignaz.forster@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The following patch adds support for the Logitech Speed Force Wireless gaming
wheel. Originally designed for the WII console. Details on the protocol:

http://wiibrew.org/wiki/Logitech_USB_steering_wheel

This patch relies on previous patch:
"Don't Send Feature Reports on Interrupt Endpoint"

Logitech as produce a very similar wheel for the PS2/PS3, it is expected that
this patch could also support the PS2/PS3 wheel if the USB ID's are added and
(if required) the HID descriptor is modified.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch add support for Pyra mobile gaming mouse from Roccat.
It provides access to profiles, settings, actual settings etc.
through sysfs attributes.
This driver is conceptual similar to the existing Kone driver.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for Waltop Slim Tablet 5.8 inch and Media Tablet 10.6 inch.

These (and other Waltop) tablets are usually sold by different companies
(such as Genius and Trust) and with different names, but with the same USB
vendor/product IDs.

Slim Tablet 5.8 inch is known to also be sold as Genius G-Pen F350 and Trust
Widescreen Mini Tablet (item no 16485).

Media Tablet 10.6 inch is known to also be sold as Genius G-Pen M609 and
M609X. Of these only the latter is known to be supported.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for UC-Logic WP4030U, WP5540U and WP8060U tablets.
These tablets are usually sold by Genius, Trust and possibly others under
different names and in different cases, but with the original USB
vendor/product IDs.

Currently, these tablets are supported by standalone X.org driver WizardPen.
This patch aims to fix them in the kernel and make them supported by the
generic evdev X.org driver. Still, some minor fixes in the X.org driver are
to be made for the full stack support.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds force feedback support for ACRUX USB game controllers.
These devices are mass produced in China by several vendors.
Signed-off-by: NSergei Kolzun <x0r@dv-life.ru>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch removes the annoying feature of Elecoms BM084 to constantly scroll to the right.
The device can be found at:
http://www.dealextreme.com/details.dx/sku.15402Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com>
[jkosina@suse.cz: fix build error]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Module roccat is a char device used to report special events of roccat hardware
to userland. These events include requests for on-screen-display of profile or
dpi settings or requests for execution of macro sequences that are not stored
in device. The information in these events depends on hid device implementation
and contains data that is not available in a single hid event or else hidraw
could have been used.

It is inspired by hidraw, but uses only one circular buffer for all readers.
The device is as generic as possible so that the functionality is usable by all
(kone and upcomming) roccat device drivers.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

A specialised HID driver for the Zydacron Remote Control (usb id: 13ec:0006).

The specialised HID driver adds support for the buttons which are not

currently handled by the default HID driver.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard.

The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard,
multimedia keys and a touch sensitive musical keyboard.

The specialised HID driver adds full support for the musical keyboard and extra
multimedia keys which are not currently handled by the default HID driver.

The specialised HID driver interfaces with ALSA, and presents the midi keyboard
as a rawmidi device. Sustain duration, octave shifting and the midi output
channel can be read/written form userspace via sysfs.
Signed-off-by: NDon Prince <dhprince-devel@yahoo.co.uk>
ALSA parts:
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added support for the Cando dual touch panels, found in the Lenovo S10-3t.
Signed-off-by: NStephane Chatty <chatty@enac.fr>
Tested-by: NPriya Vijayan <priya.vijayan@intel.com>
Tested-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>