- 15 9月, 2009 1 次提交
-
-
由 Ken Kawasaki 提交于
pcnet_cs,serial_cs: add cis of Linksys lan&modem mulitifunction pcmcia card and some modem card(MT5634ZLX, RS-COM-2P). Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2009 2 次提交
-
-
由 Ben Hutchings 提交于
A few drivers still access the arguments to MDIO ioctls as an array of u16. Convert them to use struct mii_ioctl_data. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2009 1 次提交
-
-
由 Ken Kawasaki 提交于
add new id (RIOS System PC CARD3 ETHERNET). Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2009 1 次提交
-
-
由 Ken Kawasaki 提交于
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2009 1 次提交
-
-
由 Cord Walter 提交于
Signed-off-by: NCord Walter <qord@cwalter.net> Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 1 次提交
-
-
由 Cord Walter 提交于
Hi, after noticing that my Netgear FA411 (PCMCIA-NIC) [1] stopped working with the release of the 2.6.25 kernel (sidux-version), I checked the respective driver sources and noticed that the pcnet_cs driver bailed out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. I compiled a kernel with the PCMCIA-ID for the netgear card moved to axnet_cs from pcnet_cs which worked. I then contacted sidux-kernel maintainer Stefan Lippers-Hollmann who turned the info into this patch and integrated it into the kernel: <http://svn.berlios.de/svnroot/repos/fullstory/linux-sidux-2.6/trunk/debian/patches/features/2.6.27.4_PCMCIA_move-PCMCIA-ID-for-Netgear-FA411-from-pcnet_cs-to-axnet_cs.patch> This works for me and AFAIK there were no reports of any breakage for other devices on sidux-support. This looks like a trivial patch, but since I have very limited experience with kernel modifications I might be woefully wrong there. But if there are no side effects of this patch, is it possible to get it into the official kernel? I can provide more detailed information on the affected hardware if necessary. -cord [1] Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) From: Stefan Lippers-Hollmann <s.l-h@gmx.de> Date: Sat, 1 Nov 2008 23:53:04 +0000 Subject: PCMCIA: move PCMCIA ID for Netgear FA411 from pcnet_cs to axnet_cs: Since kernel 2.6.25, commit 61da96be (pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.), pcnet_cs bails out with "use axnet_cs instead" for the Netgear FA411, but axnet_cs doesn't claim this ID. Socket 1 Device 0: [axnet_cs] (bus ID: 1.0) Configuration: state: on Product Name: NETGEAR FA411 Fast Ethernet Identification: manf_id: 0x0149 card_id: 0x0411 function: 6 (network) prod_id(1): "NETGEAR" (0x9aa79dc3) prod_id(2): "FA411" (0x40fad875) prod_id(3): "Fast Ethernet" (0xb4be14e3) prod_id(4): --- (---) Cc: stable <stable@kernel.org> [2.6.25, 2.6.26, 2.6.27] Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: NCord Walter <qord@cwalter.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2008 1 次提交
-
-
由 Komuro 提交于
pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 8月, 2008 5 次提交
-
-
由 Dominik Brodowski 提交于
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in the pcmcia_config_loop() callback function. Therefore, factor it out. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use the config loop helper in (some) net pcmcia drivers. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 27 6月, 2008 1 次提交
-
-
由 Komuro 提交于
Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 24 2月, 2008 1 次提交
-
-
由 Komuro 提交于
* If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 2月, 2008 2 次提交
-
-
由 Richard Knutsson 提交于
Fixing: CHECK drivers/net/pcmcia/pcnet_cs.c drivers/net/pcmcia/pcnet_cs.c:523:15: warning: symbol 'hw_info' shadows an earlier one drivers/net/pcmcia/pcnet_cs.c:148:18: originally declared here Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 1月, 2008 1 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 18 12月, 2007 1 次提交
-
-
由 Komuro 提交于
add new id: Planex CF-10T Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 29 10月, 2007 1 次提交
-
-
由 Komuro 提交于
The drivers below support IRQ-sharing. 3c574_cs, 3c589_cs, pcnet_cs, axnet_cs, smc91c92_cs, fmvj18x_cs. xirc2ps_cs, serial_cs. Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2007 4 次提交
-
-
由 Komuro 提交于
axnet_cs: Laneed LD-CDK/TX pcnet_cs: LEMEL LM-N89TX PRO Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Joe Perches 提交于
This is nicer than the MAC_FMT stuff. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Cheng 提交于
Signed-off-by: NDenis Cheng <crquan@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2007 1 次提交
-
-
由 Marcin Juszkiewicz 提交于
One card submitted by Ångström user. Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 09 7月, 2007 2 次提交
-
-
由 Yoichi Yuasa 提交于
This patch has added return value check of request_irq() to pcmcia net drivers. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Komuro 提交于
fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 09 1月, 2007 1 次提交
-
-
由 Komuro 提交于
pcnet_cs: add new id. corega K.K. (CG-LAPCCTXD) Logitec LPM-LN10TE Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 12月, 2006 2 次提交
-
-
由 Dominik Brodowski 提交于
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 02 12月, 2006 1 次提交
-
-
由 Komuro 提交于
Remove the code to change the E8390_CMD register from ei_watchdog(). The 8390-page is always 0 outside the spin_lock. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 14 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 09 8月, 2006 1 次提交
-
-
由 Komuro 提交于
'mdio_reset' has bad side effects that moves the phy_id. DL10022-based cards work properly without 'mdio_reset'. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 5月, 2006 2 次提交
-
-
由 Jeff Garzik 提交于
-
由 Marcin Juszkiewicz 提交于
Add TRENDnet TE-CF100 ethernet adapter to pcnet_cs list. product info: "Fast Ethernet", "CF Size PC Card", "1.0", "" manfid: 0x0149, 0xc1ab Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl> drivers/net/pcmcia/pcnet_cs.c | 2 ++ 1 file changed, 2 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 22 4月, 2006 1 次提交
-
-
由 Dominik Brodowski 提交于
This adds a new ID to pcnet_cs, as noted by Kuro Moji. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-