- 20 8月, 2009 5 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This adds some code to do early ioremap's using page tables instead of bolting entries in the hash table. This will be used by the upcoming 64-bits BookE port. The patch also changes the test for early vs. late ioremap to use slab_is_available() instead of our old hackish mem_init_done. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The current "no hash" MMU context management code is written with the assumption that one CPU == one TLB. This is not the case on implementations that support HW multithreading, where several linux CPUs can share the same TLB. This adds some basic support for this to our context management and our TLB flushing code. It also cleans up the optional debugging output a bit Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
TASK_UNMAPPED_BASE is not used with the new top down mmap layout. We can reuse this preload slot by loading in the segment at 0x10000000, where almost all PowerPC binaries are linked at. On a microbenchmark that bounces a token between two 64bit processes over pipes and calls gettimeofday each iteration (to access the VDSO), both the 32bit and 64bit context switch rate improves (tested on a 4GHz POWER6): 32bit: 273k/sec -> 283k/sec 64bit: 277k/sec -> 284k/sec Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
With the new top down layout it is likely that the pc and stack will be in the same segment, because the pc is most likely in a library allocated via a top down mmap. Right now we bail out early if these segments match. Rearrange the SLB preload code to sanity check all SLB preload addresses are not in the kernel, then check all addresses for conflicts. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 7月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
In switch_mmu_context() if we call steal_context_smp() to get a context to use we shouldn't fall through and than call steal_context_up(). Doing so can be problematic in that the 'mm' that steal_context_up() ends up using will not get marked dirty in the stale_map[] for other CPUs that might have used that mm. Thus we could end up with stale TLB entries in the other CPUs that can cause all kinda of havoc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 28 7月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: NNick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2009 5 次提交
-
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 2036 368 8 2412 96c arch/powerpc/mm/pgtable.o size after: text data bss dec hex filename 1677 248 8 1933 78d arch/powerpc/mm/pgtable.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3252 384 0 3636 e34 arch/powerpc/mm/gup.o size after: text data bss dec hex filename 2576 96 0 2672 a70 arch/powerpc/mm/gup.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3261 416 4 3681 e61 arch/powerpc/mm/slb.o size after: text data bss dec hex filename 2861 248 4 3113 c29 arch/powerpc/mm/slb.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 1508 48 28 1584 630 powerpc/mm/mmu_context_nohash.o size after: text data bss dec hex filename 1088 0 28 1116 45c powerpc/mm/mmu_context_nohash.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 6月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Those functions are way too big to be inline, besides, kmap_atomic() wants to call debug_kmap_atomic() which isn't exported for modules and causes module link failures. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 22 6月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2009 1 次提交
-
-
由 Michael Ellerman 提交于
Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 13 6月, 2009 1 次提交
-
-
由 Sankar P 提交于
Fixes a trivial spelling error in powerpc code comments. Signed-off-by: NSankar P <sankar.curiosity@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 6月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 6月, 2009 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This is a random collection of added ifdef's around portions of code that only mak sense on server processors. Using either CONFIG_PPC_STD_MMU_64 or CONFIG_PPC_BOOK3S as seems appropriate. This is meant to make the future merging of Book3E 64-bit support easier. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
For some obscure reason, we only set init_bootmem_done after initializing bootmem when NUMA isn't enabled. We even document this next to the declaration of that global in system.h which of course I didn't read before I had to debug why some WIP code wasn't working properly... This patch changes it so that we always set it after bootmem is initialized which should have always been the case... go figure ! Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The MMU context_lock can be taken from switch_mm() while the rq->lock is held. The rq->lock can also be taken from interrupts, thus if we get interrupted in destroy_context() with the context lock held and that interrupt tries to take the rq->lock, there's a possible deadlock scenario with another CPU having the rq->lock and calling switch_mm() which takes our context lock. The fix is to always ensure interrupts are off when taking our context lock. The switch_mm() path is already good so this fixes the destroy_context() path. While at it, turn the context lock into a new style spinlock. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This patch fixes a couple of issues that can happen as a result of steal_context() dropping the context_lock when all possible PIDs are ineligible for stealing (hopefully an extremely hard to hit occurence). This case exposes the possibility of a stale context_mm[] entry to be seen since destroy_context() doesn't clear it and the free map isn't re-tested. It also means steal_context() will not notice a context freed while the lock was help, thus possibly trying to steal a context when a free one was available. This fixes it by always returning to the caller from steal_context when it dropped the lock with a return value that causes the caller to re-samble the number of free contexts, along with properly clearing the context_mm[] array for destroyed contexts. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 5月, 2009 3 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The implementation we just revived has issues, such as using a Kconfig-defined virtual address area in kernel space that nothing actually carves out (and thus will overlap whatever is there), or having some dependencies on being self contained in a single PTE page which adds unnecessary constraints on the kernel virtual address space. This fixes it by using more classic PTE accessors and automatically locating the area for consistent memory, carving an appropriate hole in the kernel virtual address space, leaving only the size of that area as a Kconfig option. It also brings some dma-mask related fixes from the ARM implementation which was almost identical initially but grew its own fixes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
(pre-requisite to make the next patches more palatable) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 5月, 2009 1 次提交
-
-
由 Hideo Saito 提交于
The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: NHideo Saito <hsaito.ppc@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 5月, 2009 1 次提交
-
-
由 Milton Miller 提交于
This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards compatibilty for CPUs before 2.06. Only useful for bare metal systems. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 18 5月, 2009 1 次提交
-
-
由 Mel Gorman 提交于
With CONFIG_DEBUG_VM, an assertion is made when changing the protection flags of a PTE that the PTE is locked. Huge pages use a different pagetable format and the assertion is bogus and will always trigger with a bug looking something like Unable to handle kernel paging request for data at address 0xf1a00235800006f8 Faulting instruction address: 0xc000000000034a80 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA Maple Modules linked in: dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor windfarm_cpufreq_clamp windfarm_core i2c_powermac NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003 REGS: c000000003037600 TRAP: 0300 Not tainted (2.6.30-rc3-autokern1) MSR: 9000000000009032 <EE,ME,IR,DR> CR: 28002484 XER: 200fffff DAR: f1a00235800006f8, DSISR: 0000000040010000 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 Call Trace: [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable) [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c Instruction dump: 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000 This patch fixes the problem by not asseting the PTE is locked for VMAs backed by huge pages. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 5月, 2009 1 次提交
-
-
由 Becky Bruce 提交于
We're currently choking on mem=4g (and above) due to memory_limit being specified as an unsigned long. Make memory_limit phys_addr_t to fix this. Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 4月, 2009 2 次提交
-
-
由 Stephen Rothwell 提交于
Previous gcc versions didn't notice this because one of the preceding #ifs always evaluated to true. gcc 4.4.0 produced this error: arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
This reverts commit e9965577. Our HW guys were able to fix this so it never sees the light of day. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 4月, 2009 1 次提交
-
-
由 Michael Ellerman 提交于
early_init_mmu_secondary() is called at CPU hotplug time, so it must be marked as __cpuinit, not __init. Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit"). Tested-by: NSachin Sant <sachinp@in.ibm.com> Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 4月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
Paul suggested we allow for data addresses to be recorded along with the traditional IPs as power can provide these. For now, only the software pagefault events provide data addresses, but in the future power might as well for some events. x86 doesn't seem capable of providing this atm. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> LKML-Reference: <20090408130409.394816925@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 4月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
arch/powerpc/mm/tlb_nohash.c: In function 'flush_tlb_mm': arch/powerpc/mm/tlb_nohash.c:128: warning: unused variable 'cpu_mask' Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 07 4月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
During the ISA 2.06 development the opcode for tlbilx changed and some early implementations used to old opcode. Add support for a MMU_FTR fixup to deal with this. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 06 4月, 2009 2 次提交
-
-
由 Peter Zijlstra 提交于
Provide separate sw counters for major and minor page faults. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
We use the generic software counter infrastructure to provide page fault events. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 3月, 2009 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This moves some MMU related init code out of setup_64.c into hash_utils_64.c and calls it early_init_mmu() and early_init_mmu_secondary(). This will make it easier to plug in a new MMU type. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We need to use %zu instead of %d when printing a sizeof() Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This file is only useful on 64-bit, so we name it accordingly. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This patch tweaks the way some PTE bit combinations are defined, in such a way that the 32 and 64-bit variant become almost identical and that will make it easier to bring in a new common pte-* file for the new variant of the Book3-E support. The combination of bits defining access to kernel pages are now clearly separated from the combination used by userspace and the core VM. The resulting generated code should remain identical unless I made a mistake. Note: While at it, I removed a non-sensical statement related to CONFIG_KGDB in ppc_mmu_32.c which could cause kernel mappings to be user accessible when that option is enabled. Probably something that bitrot. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-