Fix kconfig unmet dependency warning.  BACKLIGHT_CLASS_DEVICE depends on
BACKLIGHT_LCD_SUPPORT, so select the latter along with the former.

warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: Fix bandwidth calculation for DisplayPort
  drm/nouveau: by default use low bpp framebuffer on low memory cards
  drm/nv10: Change the BO size threshold determining the memory placement range.
  drm/nvc0: enable acceleration for nvc1 by default
  drm/nvc0/gr: fixup the mmio list register writes for 0xc1
  drm/nvc1: hacky workaround to fix accel issues
  drm/nvc0/gr: fix some bugs in grctx generation
  drm/nvc0: enable acceleration on 0xc8 by default
  drm/nvc0/vram: skip disabled PBFB subunits
  drm/nv40/pm: fix issues on igp chipsets, which don't have memory
  drm/nouveau: testing the wrong variable
  drm/nvc0/vram: storage type 0xc3 is not compressed
  drm/nv50: fix stability issue on NV86.
  drm/nouveau: initialize chan->fence.lock before use
  drm/nv50/vram: fix incorrect detection of bank count on newer chipsets
  drm/nv50/gr: typo fix, how about we not reset fifo during graph init?
  drm/nv50/bios: fixup mpll programming from the init table parser
  drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify()
  drm: make sure drm_vblank_init() has been called before touching vbl_lock

during the review of the fix for locks problems in drm_wait_vblank,
a couple of false concerns were raised about how the drm_vblank_get
and drm_vblank_put are used in this function; it turned out that the
code is correct and that it cannot be simplified

add a few comments to explain non-obvious flows in the code,
to prevent "false alarms" in the future

v2: incorporate comments received from Daniel Vetter
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

radeon_benchmark_do_move() returns an int so "time" should be int
too.  Making it unsigned breaks the error handling.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_wait_vblank must be DRM_UNLOCKED because otherwise it
will grab the drm_global_mutex and then go to sleep until the vblank
event it is waiting for. That can wreck havoc in the windowing system
because if one process issues this ioctl, it will block all other
processes for the duration of all vblanks between the current and the
one it is waiting for. In some cases it can block the entire windowing
system.

v2: incorporate comments received from Daniel Vetter and
    Michel Daenzer.

v3/v4: after a lengty discussion with Daniel Vetter, it was concluded
       that the only thing not yet protected with locks and atomic
       ops is the write to dev->last_vblank_wait. It's only used in a
       debug file in proc, and the current code already employs no
       correct locking: the proc file only takes dev->struct_mutex,
       whereas drm_wait_vblank implicitly took the drm_global_mutex.
       Given all this, it's not worth bothering to try to fix
       the locks at this time.
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

As Exynos DRM is merged at mainline. Also update the maintainer entry.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We restore the CRTC, encoder, and connector configurations, but if the
mode set failed, the attached display may have been turned off, so we
need to try set_config again to restore things to the way they were.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Can happen when there is no DP panel attached, confusing
users.  Make it debug only.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

slow-work got killed in commit 181a51f6. This means that since v2.6.36
there is no Kconfig symbol SLOW_WORK. Apparently selecting that symbol
is a nop. Drop that select.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nouveau, when configured with debugfs, creates debugfs files for every
channel, so structure holding list of files needs to be protected from
simultaneous changes by multiple threads.

Without this patch it's possible to hit kernel oops in
drm_debugfs_remove_files just by running a couple of xterms with
looped glxinfo.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This hunk seems to have gotten lost when I rebased the patch.
Reported-by: NSylvain Bertrand <sylvain.bertrand@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was only the case if the GPU reset was triggered from the CS ioctl,
otherwise other processes could happily enter the CS ioctl and wreak havoc
during the GPU reset.

This is a little complicated because the GPU reset can be triggered from the
CS ioctl, in which case we're already holding the mutex, or from other call
paths, in which case we need to lock the mutex. AFAICT the mutex API doesn't
allow recursive locking or finding out the mutex owner, so we need to handle
this with helper functions which allow recursive locking from the same
process.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes Coverity buffer not null terminated defect.
Signed-off-by: NVinson Lee <vlee@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Snooping code expects this to be the case.
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Ported from the equivalent fix in drm-intel-next:

http://cgit.freedesktop.org/~keithp/linux/commit/?h=drm-intel-next&id=cd9dde44f47501394b9f0715b6a36a92aa74c0d0Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Framebuffer's BPP is not that important but can waste significant part
of memory on low-VRAM cards. Lower it to 8bpp on < 32MB cards and to
16bpp on 64MB cards. It can still be overridden by video= option.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes the framebuffer memory allocation failure seen on some
low-memory cards, followed by X refusing to start.

https://bugs.freedesktop.org/show_bug.cgi?id=42384Reported-by: NChris Paulson-Ellis <chris@edesix.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Most serious is for chips with only 1 TPC, we'd get stuck in an infinite
loop.  The fix here will slightly change the setup for all other chipsets
too, but, it shouldn't matter too much, and this all needs figuring out
and likely redone anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Worked well enough for glxgears and gnome-shell at least, no reason to
have this off anymore.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

memtimings is a valid pointer here, the intent was to test for
kcalloc() failure.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NChristoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Confirmed to fix random hangs while running all Unegine demos on NV86.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fence lock needs to be initialized before any call to nouveau_channel_put
because it calls nouveau_channel_idle->nouveau_fence_update which uses
fence lock.

BUG: spinlock bad magic on CPU#0, test/24134
 lock: ffff88019f90dba8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800
Call Trace:
 spin_bug+0x9c/0xa3
 do_raw_spin_lock+0x29/0x13c
 _raw_spin_lock+0x1e/0x22
 nouveau_fence_update+0x2d/0xf1
 nouveau_channel_idle+0x22/0xa0
 nouveau_channel_put_unlocked+0x84/0x1bd
 nouveau_channel_put+0x20/0x24
 nouveau_channel_alloc+0x4ec/0x585
 nouveau_ioctl_fifo_alloc+0x50/0x130
 drm_ioctl+0x289/0x361
 do_vfs_ioctl+0x4dd/0x52c
 sys_ioctl+0x42/0x65
 system_call_fastpath+0x16/0x1b

It's easily triggerable from userspace.

Additionally remove double initialization of chan->fence.pending.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

NVA3+ has an extra bit here compared to NV50:NVA3 chipsets.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reportedly this has been causing stability and corruption issues after
resuming from suspend for a few people.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I've been seeing memory leaks on my system in the form of large
(300-400MB) GEM objects created by now-dead processes laying around
clogging up memory.  I usually notice when it gets to about 1.2GB of
them.  Hopefully this clears up the issue, but I just found this bug
by inspection.
Signed-off-by: NEric Anholt <eric@anholt.net>
Cc: stable@kernel.org
Signed-off-by: NKeith Packard <keithp@keithp.com>

Kernels with no iommu support cannot ever need the Ironlake
work-around, so never enable it in that case.

Might be better to completely remove the work-around from the kernel
in this case?
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>

The semi-colon is a typo here and it makes the if statement
unconditional.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...