- 11 1月, 2011 4 次提交
-
-
由 Mattia Dongili 提交于
Add new mappings for assist, VAIO, zoom and eject buttons present on refurbished P, Z and EC models. Reported-by: NGyorgy Jeney <nog.lkml@gmail.com> Reported-by: NStephan Mueller <smueller@chronox.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Mark Brown 提交于
Currently the x86 platform devices are not consistent about selecting or depending on the LEDs Kconfig variables, and this inconsistency leads to Kconfig getting upset and refusing to offer LEDs (even on non-x86 platforms): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI Fix this by always selecting rather than depending on the symbols as slightly more drivers use this approach already and it seems more user friendly. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Randy Dunlap 提交于
Fix sparse warning for non-ANSI function declaration: drivers/platform/x86/sony-laptop.c:1134:35: warning: non-ANSI function declaration of function 'sony_nc_rfkill_update' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Mattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Randy Dunlap 提交于
Fix sparse warning for non-ANSI function declaration: drivers/platform/x86/intel_ips.c:1477:25: warning: non-ANSI function declaration of function 'ips_link_to_i915_driver' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 08 1月, 2011 32 次提交
-
-
由 Albert Astals Cid 提交于
Add the KHLB2 model identifier to the list of supported models Signed-off-by: NAlbert Astals Cid <aacid@kde.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 From: Lee, Chun-Yi 提交于
Enabled Acer Launch Manager mode to disable the EC raw behavior for communication devices when WMID3 method available. And, we also add a ec_raw_mode kernel module option for enable The EC raw behavior mode when anyone what reset it back. When Acer Launch Manager mode enabled, EC will stop to touch any communication devices' RF state or power state that causes conflict with rfkill_input or any userland daemon to charge the rfkill rules. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Acked-by: NThomas Renninger <trenn@suse.de> Acked-by: NJiri Benc <jbenc@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Feng Tang 提交于
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch will make it support both the new and old interface. Cc: Alek Du <alek.du@intel.com> Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Jesper Juhl 提交于
ACPI Thinkpad: We must always call va_end() after va_start() but do not do so in thinkpad_acpi.c::acpi_evalf() Hi, In drivers/platform/x86/thinkpad_acpi.c::acpi_evalf() we don't always call va_end() after va_start(). This patch corrects that. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
Initial wlan/bluetooth/wwan rfkill software block state when acer-wmi driver probe. Acer notebook can save the devices state and this patch can use it to initial the devices' rfkill state. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Acked-by: NThomas Renninger <trenn@suse.de> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
Check the Acer OEM-specific Type AA to detect the WiFi/Bluetooth/3G devices available or not, and set the devices capability flag. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Reviewed-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NThomas Renninger <trenn@suse.de> Acked-by: NJiri Benc <jbenc@suse.cz> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
Add 3G rfkill sysfs file for provide userland to control 3G device on/off by using WMI method. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Acked-by: NThomas Renninger <trenn@suse.de> Acked-by: NJiri Benc <jbenc@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NCarlos Corbaho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Lee, Chun-Yi 提交于
Add acer wmi hotkey event support. Install a wmi notify handler to transfer wmi event key to key code, then send out keycode through acer wmi input device to userland. Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NThomas Renninger <trenn@suse.de> Acked-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Sedat Dilek 提交于
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI". Quote from David Woodhouse: "A better policy is: "NEVER USE SELECT"." Reported-and-tested-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Passing ideapad_priv as argument and try not to using too much global variable. This is part 2 for rfkill. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Passing ideapad_priv as argument and try not to using too much global variable. This is part 1 for platform driver and input device. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
1. Add markups on init and exit functions 2. Unify the comments in the same style 3. Return result when module initial Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Hotkey enabled by this patch: Fn+F3: Video mode switch Fn+F5: software rfkill for wifi For some ideapad when push Fn+F3, hardware generates Super-P keys, those key will not be enabled by this patch. Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not set, when building, you will have error message: ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! To select INPUT_SPARSEKMAP solve this issue. Ref: http://lkml.org/lkml/2010/12/2/340Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power move to /sys/devices/platform/ideapad/camera_power Add document about usage of ideapad node in sysfs. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
Create /sys/devices/platform/ideapad for nodes of ideapad landing. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Namhyung Kim 提交于
Annotate pnp_ids as '__used' to fix following warning: CC drivers/platform/x86/fujitsu-laptop.o drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dan Carpenter 提交于
The break resets the retval to 0 but we want to return an error code. This was introduced in c64eefd4 "WMI: embed struct device directly into wmi_block" Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Corentin Chary 提交于
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop is enabled, don't allow eeepc-wmi to load because: - eeepc-laptop may be loaded, and can conflict with eeepc-wmi (they both try to register eeepc::touchpad led for example). - the WMI interface is inteded to be used when the OS is not detected as Win 7. And when this is the case, the ASUS010 device is disabled. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Allow te get the current led state in a more accurate way. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Since eeepc-wmi has currently no official maintainer, I claim maintainership of this driver, and add it to the acpi4asus project. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
eeepc-wmi/ - debugfs root directory dev_id - current dev_id ctrl_param - current ctrl_param devs - call DEVS(dev_id, ctrl_param) and print result dsts - call DSTS(dev_id) and print result DEVS and DSTS are the main functions used in eeepc-wmi, this will allow to test new features without patching the drivers. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
wimax support is missing because I don't have any DSDT with WMI and wimax support. Most of the code comes from eeepc-laptop. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Most of the code comes from eeepc-laptop. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
The old code was using platform_driver.probe to initialize eeepc_wmi context. That's a mistake because if probe fail, eeepc_platform_register() won't tell anyone, and chaos will happen. Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(), and try to use the static platform_device only in eeepc_wmi_init() and eeepc_wmi_exit() The code is now very similar to eeepc-laptop, except eeepc_laptop_add and eeepc_laptop_remove are called from acpi_driver, not module init/exit functions, but WMI doesn't provide such functionalities (yet ?). Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
Add missing input_sync call in cmpc_keys_handler function. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked state is already set to the same value (little optimization). This can happen for example if we initialize the module with same initial hardware state (rfkill core always call cmpc_rfkill_block on initialization here). Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be seen on AML code from acpidump->DSDT from a classmate sample I have, so should be fine setting state only to 0 or 1 directly. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
由 Colin King 提交于
WMI data blocks can contain WMI events with the same GUID but with different notifiy_ids, for example volume up/down hotkeys. This patch enables a single event handler to be registered and unregistered against all events with same GUID but different notify_ids. Since an event handler is passed the notify_id of an event it can can differentiate between the different events. The patch also ensures we only register and unregister a device per unique GUID. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Sreedhara DS 提交于
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by: NSreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 23 12月, 2010 1 次提交
-
-
由 Eric Anholt 提交于
The IPS driver is designed to be able to run detached from i915 and just not enable GPU turbo in that case, in order to avoid module dependencies between the two drivers. This means that we don't know what the load order between the two is going to be, and we had previously only supported IPS after (optionally) i915, but not i915 after IPS. If the wrong order was chosen, you'd get no GPU turbo, and something like half the possible graphics performance. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
- 07 12月, 2010 1 次提交
-
-
While looking for the duplicates in /sys/class/wmi/, I couldn't find them. The code that looks for duplicates uses strncmp in a binary GUID, which may contain zero bytes. The right function is memcmp, which is also used in another section of wmi code. It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of 39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth printed, they were found as equal by strncmp. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Cc: stable@kernel.org
-
- 25 11月, 2010 2 次提交
-
-
由 Zeng Zhaoming 提交于
Free acpi return memory after query. Signed-off-by: NZeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Anisse Astier 提交于
I didn't know the difference between the two when I wrote this code in commit c30116c6. Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-