- 17 12月, 2010 1 次提交
-
-
由 Octavian Purdila 提交于
Add dev_close_many and dev_deactivate_many to factorize another sync-rcu operation on the netdevice unregister path. $ modprobe dummy numdummies=10000 $ ip link set dev dummy* up $ time rmmod dummy Without the patch With the patch real 0m 24.63s real 0m 5.15s user 0m 0.00s user 0m 0.00s sys 0m 6.05s sys 0m 5.14s Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Allocate qdisc memory according to NUMA properties of cpus included in xps map. To be effective, qdisc should be (re)setup after changes of /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus I added a numa_node field in struct netdev_queue, containing NUMA node if all cpus included in xps_cpus share same node, else -1. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
When testing struct netdev_queue state against FROZEN bit, we also test XOFF bit. We can test both bits at once and save some cycles. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 11月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
The basic classifier keeps statistics but does not report it to user space. This showed up when using basic classifier (with police) as a default catch all on ingress; no statistics were reported. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2010 1 次提交
-
-
由 Herbert Xu 提交于
Somewhere along the lines net_cls_subsys_id became a macro when cls_cgroup is built as a module. Not only did it make cls_cgroup completely useless, it also causes it to crash on module unload. This patch fixes this by removing that macro. Thanks to Eric Dumazet for diagnosing this problem. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2010 1 次提交
-
-
由 Thomas Graf 提交于
While validating the configuration em_ops is already set, thus the individual destroy functions are called, but the ematch data has not been allocated and associated with the ematch yet. Signed-off-by: NThomas Graf <tgraf@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2010 2 次提交
-
-
由 Changli Gao 提交于
The first parameter dev isn't in use in qdisc_create_dflt(). Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Under network load, doing : tc qdisc del dev eth0 root triggers : [ 167.193087] BUG: spinlock bad magic on CPU#3, udpflood/4928 [ 167.193139] lock: c15bc324, .magic: 00000000, .owner: <none>/-1, .owner_cpu: -1 [ 167.193193] Pid: 4928, comm: udpflood Not tainted 2.6.36-rc7-11417-g215340c-dirty #323 [ 167.193245] Call Trace: [ 167.193292] [<c13abaa0>] ? printk+0x18/0x20 [ 167.193342] [<c11afb53>] spin_bug+0xa3/0xf0 [ 167.193389] [<c11afcdd>] do_raw_spin_lock+0x7d/0x160 [ 167.193440] [<c1313d4e>] ? __dev_xmit_skb+0x27e/0x2b0 [ 167.193496] [<c107382b>] ? trace_hardirqs_on+0xb/0x10 [ 167.193545] [<c13ae99a>] _raw_spin_lock+0x3a/0x40 [ 167.193593] [<c1313d4e>] ? __dev_xmit_skb+0x27e/0x2b0 [ 167.193641] [<c1313d4e>] __dev_xmit_skb+0x27e/0x2b0 commit 79640a4c (add additional lock to qdisc to increase throughput) forgot to initialize noop_qdisc and noqueue_qdisc busylock Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2010 1 次提交
-
-
由 Venkatesh Pallipadi 提交于
Peter Zijlstra found a bug in the way softirq time is accounted in VIRT_CPU_ACCOUNTING on this thread: http://lkml.indiana.edu/hypermail//linux/kernel/1009.2/01366.html The problem is, softirq processing uses local_bh_disable internally. There is no way, later in the flow, to differentiate between whether softirq is being processed or is it just that bh has been disabled. So, a hardirq when bh is disabled results in time being wrongly accounted as softirq. Looking at the code a bit more, the problem exists in !VIRT_CPU_ACCOUNTING as well. As account_system_time() in normal tick based accouting also uses softirq_count, which will be set even when not in softirq with bh disabled. Peter also suggested solution of using 2*SOFTIRQ_OFFSET as irq count for local_bh_{disable,enable} and using just SOFTIRQ_OFFSET while softirq processing. The patch below does that and adds API in_serving_softirq() which returns whether we are currently processing softirq or not. Also changes one of the usages of softirq_count in net/sched/cls_cgroup.c to in_serving_softirq. Looks like many usages of in_softirq really want in_serving_softirq. Those changes can be made individually on a case by case basis. Signed-off-by: NVenkatesh Pallipadi <venki@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-2-git-send-email-venki@google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 10月, 2010 2 次提交
-
-
由 Jan Engelhardt 提交于
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 12 10月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Add a seqlock in struct neighbour to protect neigh->ha[], and avoid dirtying neighbour in stress situation (many different flows / dsts) Dirtying takes place because of read_lock(&n->lock) and n->used writes. Switching to a seqlock, and writing n->used only on jiffies changes permits less dirtying. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2010 1 次提交
-
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2010 2 次提交
-
-
由 Dan Carpenter 提交于
skb_headroom() is unsigned so "skb_headroom(skb) + toff" is also unsigned and can't be less than zero. This test was added in 66d50d25: "u32: negative offset fix" It was supposed to fix a regression. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ingress being not used very much, and net_device->ingress_queue being quite a big object (128 or 256 bytes), use a dynamic allocation if needed (tc qdisc add dev eth0 ingress ...) dev_ingress_queue(dev) helper should be used only with RTNL taken. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
There is some confusion with rx_queue name after RPS, and net drivers private rx_queue fields. I suggest to rename "struct net_device"->rx_queue to ingress_queue. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 9月, 2010 1 次提交
-
-
由 David S. Miller 提交于
The list_head conversion unearther an unnecessary flow check. Since flow is always NULL here we don't need to see if a matching flow exists already. Reported-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2010 2 次提交
-
-
由 Michal Soltys 提交于
This patch fixes init_vf() function, so on each new backlog period parent's cl_cfmin is properly updated (including further propgation towards the root), even if the activated leaf has no upperlimit curve defined. Signed-off-by: NMichal Soltys <soltys@ziu.info> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Mahoney 提交于
While reviewing commit 1c40be12, I audited other users of tc_action_ops->dump for information leaks. That commit covered almost all of them but act_police still had a leak. opt.limit and opt.capab aren't zeroed out before the structure is passed out. This patch uses the C99 initializers to zero everything unused out. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Acked-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2010 1 次提交
-
-
由 Stephen Hemminger 提交于
Trivial extension to existing meta data match rules to allow matching on skb receive hash value. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2010 2 次提交
-
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It uses ip_send_check() and stuff like that. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2010 1 次提交
-
-
由 Stephen Rothwell 提交于
for the declararion of csum_ipv6_magic. Fixes this build error on PowerPC (at least): net/sched/act_csum.c: In function 'tcf_csum_ipv6_icmp': net/sched/act_csum.c:178: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2010 1 次提交
-
-
由 Changli Gao 提交于
We can use rxhash to classify the traffic into flows. As rxhash maybe supplied by NIC or RPS, it is cheaper. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2010 3 次提交
-
-
由 Grégoire Baron 提交于
net/sched: add ACT_CSUM action to update packets checksums ACT_CSUM can be called just after ACT_PEDIT in order to re-compute some altered checksums in IPv4 and IPv6 packets. The following checksums are supported by this patch: - IPv4: IPv4 header, ICMP, IGMP, TCP, UDP & UDPLite - IPv6: ICMPv6, TCP, UDP & UDPLite It's possible to request in the same action to update different kind of checksums, if the packets flow mix TCP, UDP and UDPLite, ... An example of usage is done in the associated iproute2 patch. Version 3 changes: - remove useless goto instructions - improve IPv6 hop options decoding Version 2 changes: - coding style correction - remove useless arguments of some functions - use stack in tcf_csum_dump() - add tcf_csum_skb_nextlayer() to factor code Signed-off-by: NGregoire Baron <baronchon@n7mm.org> Acked-by: Njamal <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
There is no need to check "s". nla_data() doesn't return NULL. Also we already dereferenced "s" at this point so it would have oopsed ealier if it were NULL. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
We leak at least 32bits of kernel memory to user land in tc dump, because we dont init all fields (capab ?) of the dumped structure. Use C99 initializers so that holes and non explicit fields are zeroed. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2010 2 次提交
-
-
由 Jarek Poplawski 提交于
Require qdisc class ops .walk and .leaf for classful qdisc in register_qdisc(). The checks could be done later insted, but these ops are really needed and used by most of classful qdiscs. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
sch_sfq as a classful qdisc needs the .leaf handler. Otherwise, there is an oops possible in tc_modify_qdisc()/check_loop(). Fixes commit 7d2681a6Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2010 3 次提交
-
-
由 Ben Greear 提交于
This is based on work originally done by Patric McHardy. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles Verify in register_qdisc() some basic qdisc class handlers are present. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles Add dummy .unbind_tcf and .put qdisc class ops for easier verification. (All other schedulers have it like this.) Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2010 1 次提交
-
-
由 Jarek Poplawski 提交于
Since there was added ->tcf_chain() method without ->bind_tcf() to sch_sfq class options, there is oops when a filter is added with the classid parameter. Fixes commit 7d2681a6 netdev thread: null pointer at cls_api.c Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Reported-by: NFranchoze Eric <franchoze@yandex.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2010 4 次提交
-
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
On the TX path, skb->data points to the ethernet header, not the network header. So when validating the packet length for accessing we should take the ethernet header into account. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
It was possible to use a negative offset in a u32 match to reference the ethernet header or other parts of the link layer header. This fixes the regression caused by: commit fbc2e7d9 Author: Changli Gao <xiaosuo@gmail.com> Date: Wed Jun 2 07:32:42 2010 -0700 cls_u32: use skb_header_pointer() to dereference data safely Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-