Many arches make shared objects for VDSOs.  Generally exclude them.
Signed-off-by: NBrian Gerst <bgerst@didntduck.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Setting RF (resume flag) allows a debugger to resume execution after a
code breakpoint without tripping the breakpoint again.  It is reset by
the CPU after execution of one instruction.

Requested by Stephane Eranian:
  "I am trying to the user HW debug registers on i386 and I am running
   into a problem with ptrace() not allowing access to EFLAGS_RF for
   POKEUSER (see FLAG_MASK).  [ ...  ] It avoids the need to remove the
   breakpoint, single step, and reinstall.  The equivalent functionality
   exists on IA-64 and is allowed by ptrace()"

Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/ia64/kernel/setup.c: In function `show_cpuinfo':
arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 12)
arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 13)

Introduced by 95235ca2Signed-off-by: NTony Luck <tony.luck@intel.com>

According to the manual, INT 6 is "invalid opcode", not "invalid operand".
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In particular, allow over-large read- or write-requests to be downgraded
to a more reasonable range, rather than considering them outright errors.

We want to protect lower layers from (the sadly all too common) overflow
conditions, but prefer to do so by chopping the requests up, rather than
just refusing them outright.

Cc: Peter Anvin <hpa@zytor.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The first of these changes s/hotplug/uevent/ was needed to
compile sn2_defconfig (ia64/sn).  The other three files
changed are blind changes of all remaining bus_type.hotplug
references I could find to bus_type.uevent.

This patch attempts to finish similar changes made in the
gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.
Signed-off-by: NKay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function ia64_pci_legacy_write() returns 0 for everything
except errors.  This return value gets sent back to the user from
pci_write_legacy_io(), making it look like every write fails.  The trivial
patch below copies the behavior of the SGI sn machvec and does what
would be expected from something implementing a write() function.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch removes an #ifdef for kernel 2.0 .
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Add filters for x86_64 generated files.
Signed-off-by: NBrian Gerst <bgerst@didntduck.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This should fix multi-threaded core-files

Signed-off-by: stsp@aknet.ru
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the
problems is that htab_initialize_secondary is called when a cpu is being
brought up, but it is marked __init.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, we do not pass the correct start_pfn to e820_hole_size, to
calculate holes.  Following patch fixes that.

The bug results in incorrect number of node_present_pages for each pgdat
and causes ugly output in /sys and probably VM inbalances.
Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Sighed-off-by: NShair Fultheim <shai@scalex86.org>
Sighed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix UML compilation when SKAS mode is disabled. Indeed, we were compiling
SKAS-only object files, which failed due to some SKAS-only headers being
excluded from the search path.

Thanks to the bug report from Pekka J Enberg.

Acked-by: Pekka J Enberg <penberg (at) cs ! helsinki ! fi>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Today, when compiling UML, I got warnings for two used unexported symbols:
readdir64 and truncate64. Indeed, my glibc headers are aliasing readdir to
readdir64 and truncate to truncate64 (and so on).

I'm then adding additional exports. Since I've no idea if the symbols where
always provided in the supported glibc's, I've added weak definitions too.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't use printk() where "current_thread_info()" is crap.

Until when we switch to running on init_stack, current_thread_info() evaluates
to crap. Printk uses "current" at times (in detail, &current is evaluated with
CONFIG_DEBUG_SPINLOCK to check the spinlock owner task).

And this leads to random segmentation faults.

Exactly, what happens is that &current = *(current_thread_info()), i.e. round
down $esp and dereference the value. I.e. access the stack below $esp, which
causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's definition is wrong (-1 means "no limit" not 999),
only the Sparc SunOS/Solaris compat code uses it, so
let's just kill it off completely from limits.h and
all referencing code.

Noticed by Ulrich Drepper.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It turns out that commit f9bd170a
broke the cascade from XICS to i8259 on pSeries machines; specifically
we ended up not ever doing the EOI on the XICS for the cascade.  The
result was that interrupts from the serial ports (and presumably any
other devices using ISA interrupts) didn't get through.  This fixes
it and also simplifies the code, by doing the EOI on the XICS in the
xics_get_irq routine after reading and acking the interrupt on the
i8259.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It was a stupid workaround for the "static inline" vs.
"extern inline" issues of long ago, and it is what causes
schedule() to be inlined like crazy into kernel/sched.c
when -Os is specified.

MIPS and S390 should probably do the same.

Now CC_OPTIMIZE_FOR_SIZE can be safely used on sparc64
once more.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now needs to include the type 1 functions ("direct") too.

Reported by Pavel Roskin <proski@gnu.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

The CPM2 interrupt handler does not return success to the IRQ subsystem, which
causes it to kill the IRQ line after 100,000 interrupts.
Signed-off-by: NEdson Seabra <Edson.Seabra@cyclades.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since we don't restore the volatile registers in the syscall exit
path, we need to make sure we don't leak any potentially interesting
values from the kernel to userspace.  This was already the case for
all except r11.  This makes it use r11 for an MSR value, so r11 will
have an (uninteresting) MSR value in it on return to userspace.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Patch from Nicolas Pitre

Strictly speaking, the NPTL kernel helpers are required for pre ARMv6
only.  They are available on ARMv6+ as well for obvious compatibility
reasons.  However there are cases where extra memory barriers are needed
when using an SMP ARMv6 machine but not on pre-ARMv6.

This patch adds a memory barrier kernel helper that glibc can use as
needed for pre-ARMv6 binaries to be forward compatible with an SMP
kernel on ARMv6, as well as the necessary dmb instructions to the
cmpxchg helper.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NDaniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

UML skas0 stub has been miscompiling for many people (incidentally not
the authors), depending on the used GCC versions.

I think (and testing on some GCC versions shows) this patch avoids the
fundamental issue which is behind this, namely gcc using the stack when
we have just replaced it, behind gcc's back.  The remapping and storage
of the return value is hidden in a blob of asm, hopefully giving gcc no
room for creativity.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

So you may have seen the miniconfig stuff wander by, which means that my
build script exits if there's a .config error, and we have this:

  fs/Kconfig:1749:warning: 'select' used by config symbol 'CIFS_UPCALL'
	refer to undefined symbol 'CONNECTOR'

This makes it shut up.
Signed-off-by: NRob Landley <rob@landley.net>
[ Verified it makes sense. ]
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

The current UML build assumes that on x86-64 systems, /lib is a symlink
to /lib64, but in some distributions (like PLD and CentOS) they are
separate directories, so the 64 bit library loader isn't found.  This
patch inserts /lib64 at the start of the rpath on x86-64 UML builds.
Signed-off-by: NRob Landley <rob@landley.net>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Duplicated code - the patch adding it was probably applied twice without
enough care.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rather than providing more wrappers for 6-arg syscalls, arrange for
them to be supported as standard.  This just means that we always
store the 6th argument on the stack, rather than in the wrappers.

This means we eliminate the wrappers for:
* sys_futex
* sys_arm_fadvise64_64
* sys_mbind
* sys_ipc
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their
declarations there match the definitions.  Old declarations in
ppc4xx_dma.h are not right anymore (wrong type, to start with).
Killed them, added include of asm/dma.h where needed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use correct address when referencing mmconfig aperture while checking
for broken MCFG.  This was a typo when porting the code from 64bit to
32bit.  It caused oopses at boot on some ThinkPads.

Should definitely go into 2.6.15.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sparc64, i386 and x86_64 have support for a special data section dedicated
to rarely updated data that is frequently read. The section was created to
avoid false sharing of those rarely read data with frequently written kernel
data.

This patch creates such a data section for ia64 and will group rarely written
data into this section.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Change the NR_CPUS default for ia64/sn up to 1024.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NJohn Hesterberg <jh@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

I see why the problem exists only on SN. SN uses a different hardware
mechanism to purge TLB entries across nodes.

It looks like there is a bug in the SN TLB flushing code. During context switch,
kernel threads inherit the mm of the task that was previously running on the
cpu. This confuses the code in sn2_global_tlb_purge().

The result is a missed TLB purge for the task that owns the "borrowed" mm.

(I hit the problem running heavy stress where kswapd was purging code pages of
a user task that woke kswapd. The user task took a SIGILL fault trying to
execute code in the page that had been ripped out from underneath it).
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Use raw_smp_processor_id() instead of get_cpu() as we don't need the
extra features of get_cpu().
Signed-off-by: NJes Sorensen <jes@trained-monkey.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The udelay() inline for ia64 uses the ITC.  If CONFIG_PREEMPT is enabled
and the platform has unsynchronized ITCs and the calling task migrates
to another CPU while doing the udelay loop, then the effective delay may
be too short or very, very long.

This patch disables preemption around 100 usec chunks of the overall
desired udelay time.  This minimizes preemption-holdoffs.

udelay() is now too big to be inline, move it out of line and export it.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>