Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

trace_vprintk() for easier implementation of tracer specific *_printk
functions. Add check check for no_tracer, and implement
__ftrace_printk() as a wrapper.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This must be brown paper bag week for Steven Rostedt!

While working on ftrace for PPC, I discovered that the hash locking done
when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect.

With a cut and paste error, I had the hash lock macro to lock for both
hash_lock _and_ hash_unlock!

This bug did not affect x86 since this bug was introduced when
CONFIG_FTRACE_MCOUNT_RECORD was added to x86.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ftrace_release is necessary for all uses of dynamic ftrace and not just
the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

make most of the tracers depend on DEBUG_KERNEL - that's their intended
purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is
not a practical limitation - but it simplifies the tracing menu in the
normal case)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While profiling the smp behaviour of the scheduler it was needed to know to
which cpu a task got woken.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently ftrace_printk only works with the ftrace tracer, switch it to an
iter_ctrl setting so we can make us of them with other tracers too.

[rostedt@redhat.com: tweak to the disable condition]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

An item in the trace buffer that is bigger than one entry may be split
up using the TRACE_CONT entry. This makes it a virtual single entry.
The current code increments the iterator index even while traversing
TRACE_CONT entries, making it look like the iterator is further than
it actually is.

This patch adds code to not increment the iterator index while skipping
over TRACE_CONT entries.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Peter Zijlstra provided me with a nice brown paper bag while letting me know
that I was doing a logical AND and not a binary one, making a condition
true more often than it should be.

Luckily, a false true is handled by the calling function and no harm is
done. But this needs to be fixed regardless.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently some of the ftrace output goes skewiff if you have more
than 9 cpus, and some if you have more than 99.

Twiddle with the headers and format strings to make up to 999 cpus
display without causing spacing problems.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds indexes into the stack that the functions in the
stack dump were found at. As an added bonus, I also added a diff
to show which function is the most notorious consumer of the stack.

The output now looks like this:

# cat /debug/tracing/stack_trace
        Depth   Size      Location    (48 entries)
        -----   ----      --------
  0)     2476     212   blk_recount_segments+0x39/0x59
  1)     2264      12   bio_phys_segments+0x16/0x1d
  2)     2252      20   blk_rq_bio_prep+0x23/0xaf
  3)     2232      12   init_request_from_bio+0x74/0x77
  4)     2220      56   __make_request+0x294/0x331
  5)     2164     136   generic_make_request+0x34f/0x37d
  6)     2028      56   submit_bio+0xe7/0xef
  7)     1972      28   submit_bh+0xd1/0xf0
  8)     1944     112   block_read_full_page+0x299/0x2a9
  9)     1832       8   blkdev_readpage+0x14/0x16
 10)     1824      28   read_cache_page_async+0x7e/0x109
 11)     1796      16   read_cache_page+0x11/0x49
 12)     1780      32   read_dev_sector+0x3c/0x72
 13)     1748      48   read_lba+0x4d/0xaa
 14)     1700     168   efi_partition+0x85/0x61b
 15)     1532      72   rescan_partitions+0x10e/0x266
 16)     1460      40   do_open+0x1c7/0x24e
 17)     1420     292   __blkdev_get+0x79/0x84
 18)     1128      12   blkdev_get+0x12/0x14
 19)     1116      20   register_disk+0xd1/0x11e
 20)     1096      28   add_disk+0x34/0x90
 21)     1068      52   sd_probe+0x2b1/0x366
 22)     1016      20   driver_probe_device+0xa5/0x120
 23)      996       8   __device_attach+0xd/0xf
 24)      988      32   bus_for_each_drv+0x3e/0x68
 25)      956      24   device_attach+0x56/0x6c
 26)      932      16   bus_attach_device+0x26/0x4d
 27)      916      64   device_add+0x380/0x4b4
 28)      852      28   scsi_sysfs_add_sdev+0xa1/0x1c9
 29)      824     160   scsi_probe_and_add_lun+0x919/0xa2a
 30)      664      36   __scsi_add_device+0x88/0xae
 31)      628      44   ata_scsi_scan_host+0x9e/0x21c
 32)      584      28   ata_host_register+0x1cb/0x1db
 33)      556      24   ata_host_activate+0x98/0xb5
 34)      532     192   ahci_init_one+0x9bd/0x9e9
 35)      340      20   pci_device_probe+0x3e/0x5e
 36)      320      20   driver_probe_device+0xa5/0x120
 37)      300      20   __driver_attach+0x3f/0x5e
 38)      280      36   bus_for_each_dev+0x40/0x62
 39)      244      12   driver_attach+0x19/0x1b
 40)      232      28   bus_add_driver+0x9c/0x1af
 41)      204      28   driver_register+0x76/0xd2
 42)      176      20   __pci_register_driver+0x44/0x71
 43)      156       8   ahci_init+0x14/0x16
 44)      148     100   _stext+0x42/0x122
 45)       48      20   kernel_init+0x175/0x1dc
 46)       28      28   kernel_thread_helper+0x7/0x10

The first column is simply an index starting from the inner most function
and counting down to the outer most.

The next column is the location that the function was found on the stack.

The next column is the size of the stack for that function.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The warning messages about old objcopy and local functions spam the
user quite drastically.  Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The mcount record method of ftrace scans objdump for references to mcount.
Using mcount as the reference to test if the calls to mcount being replaced
are indeed calls to mcount, this use of mcount was also caught as a
location to change. Using a variable that points to the mcount address
moves this reference into the data section that is not scanned, and
we do not use a false location to try and modify.

The warn on code was what was used to detect this bug.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.

You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.

For example:

# cat /debug/tracing/stack_max_size
1856

# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26

I've tested this on both x86_64 and i386.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CC      scripts/mod/empty.o
/bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied

We shouldn't assume that files have their `x' bits set.  There are various
ways in which file permissions get lost, including use of patch(1).

It might not be correct to assume that perl lives in $PATH?
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The --globalize-symbols option came out in objcopy version 2.17.
If the kernel is being compiled on a system with a lower version of
objcopy, then we can not use the globalize / localize trick to
link to symbols pointing to local functions.

This patch tests the version of objcopy and will only use the trick
if the version is greater than or equal to 2.17. Otherwise, if an
object has only local functions within a section, it will give a
nice warning and recommend the user to upgrade their objcopy.

Leaving the symbols unrecorded is not that big of a deal, since the
mcount record method changes the actual mcount code to be a simple
"ret" without recording registers or anything.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

enclose the argument in parenthesis. (especially since we cast it,
which is a high prio operation)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build
failure surfaced:

 kernel/trace/ftrace.c: In function 'ftrace_record_ip':
 kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave'
 kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave'

Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace:
add necessary locking for ftrace records").
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The modification of code is performed either by kstop_machine, before
SMP starts, or on module code before the module is executed. There is
no reason to do the modifications from assembly. The copy to and from
user functions are sufficient and produces cleaner and easier to read
code.

Thanks to Benjamin Herrenschmidt for suggesting the idea.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

During tests and checks, I've discovered that there were failures to
convert mcount callers into nops. Looking deeper into these failures,
code that was attempted to be changed was not an mcount caller.
The current code only updates if the code being changed is what it expects,
but I still investigate any time there is a failure.

What was happening is that a weak symbol was being used as a reference
for other mcount callers. That weak symbol was also referenced elsewhere
so the offsets were using the strong symbol and not the function symbol
that it was referenced from.

This patch changes the setting up of the mcount_loc section to search
for a global function that is not weak. It will pick a local over a weak
but if only a weak is found in a section, a warning is printed and the
mcount location is not recorded (just to be safe).
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I'm trying to keep all the arch changes in recordmcount.pl in one place.
I moved your code into that area, by adding the flags to the commands
that were passed in.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I'm seeing when I use separate src/build dirs:

make[3]: *** [arch/x86/kernel/time_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/irq_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/ldt.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/i8259.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory

This fixes it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes incorrect comment style of __ftrace_enabled_save().
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The new design of pre-recorded mcounts and updating the code outside of
kstop_machine has changed the way the records themselves are protected.

This patch uses the ftrace_lock to protect the records. Note, the lock
still does not need to be taken within calls that are only called via
kstop_machine, since the that code can not run while the spin lock is held.

Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is
configured. Also did a slight cleanup of an unused variable.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If one of the self tests of ftrace has disabled the function tracer,
do not run the code to convert the mcount calls in modules.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes some mistakes on the tracer in warning messages when
debugfs fails to create tracing files.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: srostedt@redhat.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

hack around:

 ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i  CC      arch/x86/mm/extable.o
 objcopy: 'init/.tmp_mx_calibrate.o': No such file
 rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory
 ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported
 mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory
 ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 kernel/built-in.o: In function `ftrace_dump':
 (.text+0x2e2ea): undefined reference to `ftrace_kill_atomic'
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 In file included from init/main.c:65:
 include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token
 make[1]: *** [init/main.o] Error 1
 make: *** [init/main.o] Error 2
Signed-off-by: NIngo Molnar <mingo@elte.hu>

At OLS I had a lot of interest to be able to have the ftrace buffers
dumped on panic.  Usually one would expect to uses kexec and examine
the buffers after a new kernel is loaded. But sometimes the resources
do not permit kdump and kexec, so having an option to still see the
sequence of events up to the crash is very advantageous.

This patch adds the option to have the ftrace buffers dumped to the
console in the latency_trace format on a panic. When the option is set,
the default entries per CPU buffer are lowered to 16384, since the writing
to the serial (if that is the console) may take an awful long time
otherwise.

[
 Changes since -v1:
  Got alpine to send correctly (as well as spell check working).
  Removed config option.
  Moved the static variables into ftrace_dump itself.
  Gave printk a log level.
]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Based on Randy Dunlap's suggestion, the ftrace_printk kernel-doc belongs
with the ftrace_printk macro that should be used. Not with the
__ftrace_printk internal function.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds a feature that can help kernel developers debug their
code using ftrace.

  int ftrace_printk(const char *fmt, ...);

This records into the ftrace buffer using printf formatting. The entry
size in the buffers are still a fixed length. A new type has been added
that allows for more entries to be used for a single recording.

The start of the print is still the same as the other entries.

It returns the number of characters written to the ftrace buffer.

For example:

Having a module with the following code:

static int __init ftrace_print_test(void)
{
        ftrace_printk("jiffies are %ld\n", jiffies);
        return 0;
}

Gives me:

  insmod-5441  3...1 7569us : ftrace_print_test: jiffies are 4296626666

for the latency_trace file and:

          insmod-5441  [03]  1959.370498: ftrace_print_test jiffies are 4296626666

for the trace file.

Note: Only the infrastructure should go into the kernel. It is to help
facilitate debugging for other kernel developers. Calls to ftrace_printk
is not intended to be left in the kernel, and should be frowned upon just
like scattering printks around in the code.

But having this easily at your fingertips helps the debugging go faster
and bugs be solved quicker.

Maybe later on, we can hook this with markers and have their printf format
be sucked into ftrace output.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some tracers will need to work with more than one entry. In order to do this
the trace_entry structure was split into two fields. One for the start of
all entries, and one to continue an existing entry.

The trace_entry structure now has a "field" entry that consists of the previous
content of the trace_entry, and a "cont" entry that is just a string buffer
the size of the "field" entry.

Thanks to Andrew Morton for suggesting this idea.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When a mcount pointer is recorded into a table, it is used to add or
remove calls to mcount (replacing them with nops). If the code is removed
via removing a module, the pointers still exist.  At modifying the code
a check is always made to make sure the code being replaced is the code
expected. In-other-words, the code being replaced is compared to what
it is expected to be before being replaced.

There is a very small chance that the code being replaced just happens
to look like code that calls mcount (very small since the call to mcount
is relative). To remove this chance, this patch adds ftrace_release to
allow module unloading to remove the pointers to mcount within the module.

Another change for init calls is made to not trace calls marked with
__init. The tracing can not be started until after init is done anyway.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The notrace define belongs in compiler.h so that it can be used in
init.h
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>