- 25 1月, 2018 2 次提交
-
-
由 Peter Zijlstra 提交于
Lockdep noticed the following 3-way lockup race: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_ioctl() #4 ctx = perf_event_ctx_lock() _perf_iotcl() ftrace_profile_set_filter() #0 mutex_lock(&event_mutex) Fudge it for now by noting that the tracepoint state does not depend on the event <-> context relation. Ugly though :/ Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Lockdep gifted us with noticing the following 4-way lockup scenario: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_event_task_disable() mutex_lock(¤t->perf_event_mutex) #4 ctx = perf_event_ctx_lock() #5 perf_event_for_each_child() do_exit() task_work_run() __fput() perf_release() perf_event_release_kernel() #4 mutex_lock(&ctx->mutex) #5 mutex_lock(&event->child_mutex) free_event() _free_event() event->destroy() := perf_trace_destroy #0 mutex_lock(&event_mutex); Fix that by moving the free_event() out from under the locks. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 1月, 2018 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "Fix AMD regression due to not re-enabling the big window on resume (Christian König)" * tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Enable AMD 64-bit window on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix divide by zero in mlx5, from Talut Batheesh. 2) Guard against invalid GSO packets coming from untrusted guests and arriving in qdisc_pkt_len_init(), from Eric Dumazet. 3) Similarly add such protection to the various protocol GSO handlers. From Willem de Bruijn. 4) Fix regression added to IGMP source address checking for IGMPv3 reports, from Felix Feitkau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tls: Correct length of scatterlist in tls_sw_sendpage be2net: restore properly promisc mode after queues reconfiguration net: igmp: fix source address check for IGMPv3 reports gso: validate gso_type in GSO handlers net: qdisc_pkt_len_init() should be more robust ibmvnic: Allocate and request vpd in init_resources ibmvnic: Revert to previous mtu when unsupported value requested ibmvnic: Modify buffer size and number of queues on failover rds: tcp: compute m_ack_seq as offset from ->write_seq usbnet: silence an unnecessary warning cxgb4: fix endianness for vlan value in cxgb4_tc_flower cxgb4: set filter type to 1 for ETH_P_IPV6 net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare
-
- 23 1月, 2018 18 次提交
-
-
由 Ben Hutchings 提交于
Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Brandenburg 提交于
In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by: NMartin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Brandenburg 提交于
set_op_state_purged can delete the op. Signed-off-by: NMartin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Watson 提交于
The scatterlist is reused by both sendmsg and sendfile. If a sendmsg of smaller number of pages is followed by a sendfile of larger number of pages, the scatterlist may be too short, resulting in a crash in gcm_encrypt. Add sg_unmark_end to make the list the correct length. tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates memory in alloc_sg, or in zerocopy_from_iter. Signed-off-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
The commit 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felix Fietkau 提交于
Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by: NSebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017acc ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b4 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
John Allen says: ==================== ibmvnic: Reset behavior fixes This patchset fixes a number of issues related to ibmvnic reset uncovered from testing new Power9 machines with Everglades adapters and the new functionality to change mtu and other parameters in the driver. Changes since v1: -In patch 1/3, added the line to free the long term buffers before allocating a new one. This change inadvertently uncovered the problem that the number of queues can change after a failover as well. To fix this, we check whether or not the number of queues has changed in do_reset and if they have, we do a full release and init of the queues. -In patch 1/3, added variables to the adapter struct to track how many rx/tx pools have actually been allocated and modify the release pools routines to use these values rather than the possibly incorrect req_rx/tx_queues values. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Allen 提交于
In reset events in which our memory allocations need to be reallocated, VPD data is being freed, but never reallocated. This can cause issues if we later attempt to access that memory or reset and attempt to free the memory. This patch moves the allocation of the VPD data to init_resources so that it will be symmetrically freed during release resources. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Allen 提交于
If we request an unsupported mtu value, the vnic server will suggest a different value. Currently we take the suggested value without question and login with that value. However, the behavior doesn't seem completely sane as attempting to change the mtu to some specific value will change the mtu to some completely different value most of the time. This patch fixes the issue by logging in with the previously used mtu value and printing an error message saying that the given mtu is unsupported. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Allen 提交于
Using newer backing devices can cause the required padding at the end of buffer as well as the number of queues to change after a failover. Since we currently assume that these values never change, after a failover to a backing device with different capabilities, we can get errors from the vnic server, attempt to free long term buffers that are no longer there, or not free long term buffers that should be freed. This patch resolves the issue by checking whether any of these values change, and if so perform the necessary re-allocations. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
rds-tcp uses m_ack_seq to track the tcp ack# that indicates that the peer has received a rds_message. The m_ack_seq is used in rds_tcp_is_acked() to figure out when it is safe to drop the rds_message from the RDS retransmit queue. The m_ack_seq must be calculated as an offset from the right edge of the in-flight tcp buffer, i.e., it should be based on the ->write_seq, not the ->snd_nxt. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
That a kevent could not be scheduled is not an error. Such handlers must be able to deal with multiple events anyway. As the successful scheduling of a work is a debug event, make the failure debug priority, too. V2: coding style Signed-off-by: NOliver Neukum <oneukum@suse.com> Reported-by: NCristian Caravena <caravena@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a divide by zero due to wrong if (src_reg == 0) check in 64-bit mode. Properly handle this in interpreter and mask it also generically in verifier to guard against similar checks in JITs, from Eric and Alexei. 2) Fix a bug in arm64 JIT when tail calls are involved and progs have different stack sizes, from Daniel. 3) Reject stores into BPF context that are not expected BPF_STX | BPF_MEM variant, from Daniel. 4) Mark dst reg as unknown on {s,u}bounds adjustments when the src reg has derived bounds from dead branches, from Daniel. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Don't change endianness when assigning vlan value in cxgb4_tc_flower code when processing flow match parameters. The value gets converted to network order as part of filtering code in set_filter_wr. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower code when processing flow match parameters. Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill A. Shutemov 提交于
The new helper would check if the pfn belongs to the page. For huge pages it checks if the PFN is within range covered by the huge page. The helper is used in check_pte(). The original code the helper replaces had two call to page_to_pfn(). page_to_pfn() is relatively costly. Although current GCC is able to optimize code to have one call, it's better to do this explicitly. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 1月, 2018 6 次提交
-
-
由 Kirill A. Shutemov 提交于
Tetsuo reported random crashes under memory pressure on 32-bit x86 system and tracked down to change that introduced page_vma_mapped_walk(). The root cause of the issue is the faulty pointer math in check_pte(). As ->pte may point to an arbitrary page we have to check that they are belong to the section before doing math. Otherwise it may lead to weird results. It wasn't noticed until now as mem_map[] is virtually contiguous on flatmem or vmemmap sparsemem. Pointer arithmetic just works against all 'struct page' pointers. But with classic sparsemem, it doesn't because each section memap is allocated separately and so consecutive pfns crossing two sections might have struct pages at completely unrelated addresses. Let's restructure code a bit and replace pointer arithmetic with operations on pfns. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Acked-by: NMichal Hocko <mhocko@suse.com> Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()") Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Talat Batheesh 提交于
Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: NHelmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by: NTalat Batheesh <talatb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 pti fixes from Thomas Gleixner: "A small set of fixes for the meltdown/spectre mitigations: - Make kprobes aware of retpolines to prevent probes in the retpoline thunks. - Make the machine check exception speculation protected. MCE used to issue an indirect call directly from the ASM entry code. Convert that to a direct call into a C-function and issue the indirect call from there so the compiler can add the retpoline protection, - Make the vmexit_fill_RSB() assembly less stupid - Fix a typo in the PTI documentation" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Optimize inline assembler for vmexit_fill_RSB x86/pti: Document fix wrong index kprobes/x86: Disable optimizing on the function jumps to indirect thunk kprobes/x86: Blacklist indirect thunk functions for kprobes retpoline: Introduce start/end markers of indirect thunk x86/mce: Make machine check speculation protected
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 kexec fix from Thomas Gleixner: "A single fix for the WBINVD issue introduced by the SME support which causes kexec fails on non AMD/SME capable CPUs. Issue WBINVD only when the CPU has SME and avoid doing so in a loop" [ Side note: this patch fixes the problem, but it isn't entirely clear why it is required. The wbinvd should just work regardless, but there seems to be some system - as opposed to CPU - issue, since the wbinvd causes more problems later in the shutdown sequence, but wbinvd instructions while the system is still active are not problematic. Possibly some SMI or pending machine check issue on the affected system ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Rework wbinvd, hlt operation in stop_this_cpu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Thomas Gleixner: "A single fix for the new matrix allocator to prevent vector exhaustion by certain network drivers which allocate gazillions of unused vectors which cannot be put into reservation mode due to MSI and the lack of MSI entry masking. The fix/workaround is to spread the vectors across CPUs by searching the supplied target CPU mask for the CPU with the smallest number of allocated vectors" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/matrix: Spread interrupts on allocation
-
- 21 1月, 2018 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha fixes from Matt Turner: "A build fix and a regression fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha/PCI: Fix noname IRQ level detection alpha: extend memset16 to EV6 optimised routines
-
由 Laura Abbott 提交于
Commit bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping") moved some parameters into a structure. The structure was large enough to trigger the stack protection canary in sme_encrypt_kernel which doesn't work this early, causing reboots. Mark sme_encrypt_kernel appropriately to not use the canary. Fixes: bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping") Signed-off-by: NLaura Abbott <labbott@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Pieralisi 提交于
The conversion of the alpha architecture PCI host bridge legacy IRQ mapping/swizzling to the new PCI host bridge map/swizzle hooks carried out through: commit 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") implies that IRQ for devices are now allocated through pci_assign_irq() function in pci_device_probe() that is called when a driver matching a device is found in order to probe the device through the device driver. Alpha noname platforms required IRQ level programming to be executed in sio_fixup_irq_levels(), that is called in noname_init_pci(), a platform hook called within a subsys_initcall. In noname_init_pci(), present IRQs are detected through sio_collect_irq_levels() that check the struct pci_dev->irq number to detect if an IRQ has been allocated for the device. By the time sio_collect_irq_levels() is called, some devices may still have not a matching driver loaded to match them (eg loadable module) therefore their IRQ allocation is still pending - which means that sio_collect_irq_levels() does not programme the correct IRQ level for those devices, causing their IRQ handling to be broken when the device driver is actually loaded and the device is probed. Fix the issue by adding code in the noname map_irq() function (noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also ensures that the correct IRQ level programming is executed at platform level, fixing the issue. Fixes: 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Reported-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # 4.14 Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Meelis Roos <mroos@linux.ee> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM: - fix incorrect huge page mappings on systems using the contiguous hint for hugetlbfs - support alternative GICv4 init sequence - correctly implement the ARM SMCC for HVC and SMC handling PPC: - add KVM IOCTL for reporting vulnerability and workaround status s390: - provide userspace interface for branch prediction changes in firmware x86: - use correct macros for bits" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: wire up bpb feature KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs() arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls KVM: arm64: Fix GICv4 init when called from vgic_its_create KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips由 Linus Torvalds 提交于
Pull MIPS fixes from James Hogan: "Some final MIPS fixes for 4.15, including important build fixes and a MAINTAINERS update: - Add myself as MIPS co-maintainer. - Fix various all*config build failures (particularly as a result of switching the default MIPS platform to the "generic" platform). - Fix GCC7 build failures (duplicate const and questionable calls to missing __multi3 intrinsic on mips64r6). - Fix warnings when CPU Idle is enabled (4.14). - Fix AR7 serial output (since 3.17). - Fix ralink platform_get_irq error checking (since 3.12)" * tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MAINTAINERS: Add James as MIPS co-maintainer MIPS: Fix undefined reference to physical_memsize MIPS: Implement __multi3 for GCC7 MIPS64r6 builds MIPS: mm: Fix duplicate "const" on insn_table_MM MIPS: CM: Drop WARN_ON(vp != 0) MIPS: ralink: Fix platform_get_irq's error checking MIPS: Fix CPS SMP NS16550 UART defaults MIPS: BCM47XX Avoid compile error with MIPS allnoconfig MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILS MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE MIPS: AR7: ensure the port type's FCR value is used
-
由 Christian Borntraeger 提交于
The new firmware interfaces for branch prediction behaviour changes are transparently available for the guest. Nevertheless, there is new state attached that should be migrated and properly resetted. Provide a mechanism for handling reset, migration and VSIE. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> [Changed capability number to 152. - Radim] Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Radim Krčmář 提交于
Add PPC KVM ioctl to report vulnerability and workaround status to userspace.
-
- 20 1月, 2018 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "One fix for SAS attached SATA CD-ROMs. It turns out that the libata handling of CD devices relies on the SCSI error handler, so disable async aborts (which don't start the error handler) for these devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Disable asynchronous aborts for SATA devices
-
由 Linus Torvalds 提交于
Merge tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "All fixes marked for stable: - Fix DM thinp btree corruption seen when inserting a new key/value pair into a full root node. - Fix DM thinp btree removal deadlock due to artificially low number of allowed concurrent locks allowed. - Fix possible DM crypt corruption if kernel keyring service is used. Only affects ciphers using following IVs: essiv, lmk and tcw. - Two DM crypt device initialization error checking fixes. - Fix DM integrity to allow use of async ciphers that require DMA" * tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: fix error return code in crypt_ctr() dm crypt: wipe kernel key copy after IV initialization dm integrity: don't store cipher request on the stack dm crypt: fix crash by adding missing check for auth key size dm btree: fix serious bug in btree_split_beneath() dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "Two more small fixes - The conversion of enums into their actual numbers to display in the event format file had an off-by-one bug, that could cause an enum not to be converted, and break user space parsing tools. - A fix to a previous fix to bring back the context recursion checks. The interrupt case checks for NMI, IRQ and softirq, but the softirq returned the same number regardless if it was set or not, although the logic would force it to be set if it were hit" * tag 'trace-v4.15-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix converting enum's from the map in trace_event_eval_update() ring-buffer: Fix duplicate results in mapping context to bits in recursive lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: - a fix for use-after-free in Synaptics RMI4 driver - correction to multitouch contact tracking on certain ALPS touchpads (which got broken when we tried to fix the 2-finger scrolling) - touchpad on Lenovo T640p is switched over to SMbus/RMI - a few device node refcount fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - prevent UAF reported by KASAN Input: ALPS - fix multi-touch decoding on SS4 plus touchpads Input: synaptics - Lenovo Thinkpad T460p devices should use RMI Input: of_touchscreen - add MODULE_LICENSE Input: 88pm860x-ts - fix child-node lookup Input: twl6040-vibra - fix child-node lookup Input: twl4030-vibra - fix sibling-node lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Two bugfixes for the I2C core: Lixing Wang fixed a refcounting problem with DT nodes. Jeremy Compostella fixed a buffer overflow possibility when using a 'don't use' ioctl interface directly" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA i2c: core: decrease reference count of device node in i2c_unregister_device
-