Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 2月, 2010 1 次提交
  3. 05 1月, 2010 2 次提交
  5. 15 12月, 2009 1 次提交
    • A
      module: make MODULE_SYMBOL_PREFIX into a CONFIG option · 9e1b9b80
      由 Alan Jenkins 提交于 
      The next commit will require the use of MODULE_SYMBOL_PREFIX in
.tmp_exports-asm.S.  Currently it is mixed in with C structure
definitions in "asm/module.h".  Move the definition of this arch option
into Kconfig, so it can be easily accessed by any code.

This also lets modpost.c use the same definition.  Previously modpost
relied on a hardcoded list of architectures in mk_elfconfig.c.

A build test for blackfin, one of the two MODULE_SYMBOL_PREFIX archs,
showed the generated code was unchanged.  vmlinux was identical save
for build ids, and an apparently randomized suffix on a single "__key"
symbol in the kallsyms data).
Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org> (blackfin)
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      9e1b9b80
  7. 24 9月, 2009 3 次提交
  9. 19 9月, 2009 1 次提交
  11. 17 8月, 2009 1 次提交
    • L
      tracing/events: Add module tracepoints · 7ead8b83
      由 Li Zefan 提交于 
      Add trace points to trace module_load, module_free, module_get,
module_put and module_request, and use trace_event facility to
get the trace output.

Here's the sample output:

     TASK-PID    CPU#    TIMESTAMP  FUNCTION
        | |       |          |         |
    <...>-42    [000]     1.758380: module_request: fb0 wait=1 call_site=fb_open
    ...
    <...>-60    [000]     3.269403: module_load: scsi_wait_scan
    <...>-60    [000]     3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0
    <...>-61    [001]     3.273168: module_free: scsi_wait_scan
    ...
    <...>-1021  [000]    13.836081: module_load: sunrpc
    <...>-1021  [000]    13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1
    <...>-1027  [000]    13.848098: module_get: sunrpc call_site=try_module_get refcnt=0
    <...>-1027  [000]    13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1
    <...>-1027  [000]    13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0
    ...
 modprobe-2587  [001]  1088.437213: module_load: trace_events_sample F
 modprobe-2587  [001]  1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0

Note:

- the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0

- the module refcnt is percpu, so it can be negative in a
  specific cpu
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7ead8b83
  13. 19 6月, 2009 1 次提交
  15. 17 6月, 2009 1 次提交
  17. 12 6月, 2009 1 次提交
    • R
      module: trim exception table on init free. · ad6561df
      由 Rusty Russell 提交于 
      It's theoretically possible that there are exception table entries
which point into the (freed) init text of modules.  These could cause
future problems if other modules get loaded into that memory and cause
an exception as we'd see the wrong fixup.  The only case I know of is
kvm-intel.ko (when CONFIG_CC_OPTIMIZE_FOR_SIZE=n).

Amerigo fixed this long-standing FIXME in the x86 version, but this
patch is more general.

This implements trim_init_extable(); most archs are simple since they
use the standard lib/extable.c sort code.  Alpha and IA64 use relative
addresses in their fixups, so thier trimming is a slight variation.

Sparc32 is unique; it doesn't seem to define ARCH_HAS_SORT_EXTABLE,
yet it defines its own sort_extable() which overrides the one in lib.
It doesn't sort, so we have to mark deleted entries instead of
actually trimming them.
Inspired-by: NAmerigo Wang <amwang@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: linux-alpha@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
      ad6561df
  19. 17 4月, 2009 1 次提交
    • S
      ftrace: use module notifier for function tracer · 93eb677d
      由 Steven Rostedt 提交于 
      The hooks in the module code for the function tracer must be called
before any of that module code runs. The function tracer hooks
modify the module (replacing calls to mcount to nops). If the code
is executed while the change occurs, then the CPU can take a GPF.

To handle the above with a bit of paranoia, I originally implemented
the hooks as calls directly from the module code.

After examining the notifier calls, it looks as though the start up
notify is called before any of the module's code is executed. This makes
the use of the notify safe with ftrace.

Only the startup notify is required to be "safe". The shutdown simply
removes the entries from the ftrace function list, and does not modify
any code.

This change has another benefit. It removes a issue with a reverse dependency
in the mutexes of ftrace_lock and module_mutex.

[ Impact: fix lock dependency bug, cleanup ]

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      93eb677d
  21. 15 4月, 2009 1 次提交
    • S
      tracing/events: add support for modules to TRACE_EVENT · 6d723736
      由 Steven Rostedt 提交于 
      Impact: allow modules to add TRACE_EVENTS on load

This patch adds the final hooks to allow modules to use the TRACE_EVENT
macro. A notifier and a data structure are used to link the TRACE_EVENTs
defined in the module to connect them with the ftrace event tracing system.

It also adds the necessary automated clean ups to the trace events when a
module is removed.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      6d723736
  23. 31 3月, 2009 5 次提交
    • T
      module: Export symbols needed for Ksplice · c6b37801
      由 Tim Abbott 提交于 
      Impact: Expose some module.c symbols

Ksplice uses several functions from module.c in order to resolve
symbols and implement dependency handling.  Calling these functions
requires holding module_mutex, so it is exported.

(This is just the module part of a bigger add-exports patch from Tim).

Cc: Anders Kaseorg <andersk@mit.edu>
Cc: Jeff Arnold <jbarnold@mit.edu>
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      c6b37801
    • A
      Ksplice: Add functions for walking kallsyms symbols · 75a66614
      由 Anders Kaseorg 提交于 
      Impact: New API

kallsyms_lookup_name only returns the first match that it finds.  Ksplice
needs information about all symbols with a given name in order to correctly
resolve local symbols.

kallsyms_on_each_symbol provides a generic mechanism for iterating over the
kallsyms table.

Cc: Jeff Arnold <jbarnold@mit.edu>
Cc: Tim Abbott <tabbott@mit.edu>
Signed-off-by: NAnders Kaseorg <andersk@mit.edu>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      75a66614
    • R
      module: remove module_text_address() · a6e6abd5
      由 Rusty Russell 提交于 
      Impact: Replace and remove risky (non-EXPORTed) API

module_text_address() returns a pointer to the module, which given locking
improvements in module.c, is useless except to test for NULL:

1) If the module can't go away, use __module_text_address.
2) Otherwise, just use is_module_text_address().

Cc: linux-mtd@lists.infradead.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      a6e6abd5
    • R
      module: __module_address · e610499e
      由 Rusty Russell 提交于 
      Impact: New API, cleanup

ksplice wants to know the bounds of a module, not just the module text.

It makes sense to have __module_address.  We then implement
is_module_address and __module_text_address in terms of this (and
change is_module_text_address() to bool while we're at it).

Also, add proper kerneldoc for them all.

Cc: Anders Kaseorg <andersk@mit.edu>
Cc: Jeff Arnold <jbarnold@mit.edu>
Cc: Tim Abbott <tabbott@mit.edu>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      e610499e
    • R
      param: fix charp parameters set via sysfs · e180a6b7
      由 Rusty Russell 提交于 
      Impact: fix crash on reading from /sys/module/.../ieee80211_default_rc_algo

The module_param type "charp" simply sets a char * pointer in the
module to the parameter in the commandline string: this is why we keep
the (mangled) module command line around.  But when set via sysfs (as
about 11 charp parameters can be) this memory is freed on the way
out of the write().  Future reads hit random mem.

So we kstrdup instead: we have to check we're not in early commandline
parsing, and we have to note when we've used it so we can reliably
kfree the parameter when it's next overwritten, and also on module
unload.

(Thanks to Randy Dunlap for CONFIG_SYSFS=n fixes)
Reported-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Diagnosed-by: NFrederic Weisbecker <fweisbec@gmail.com>
Tested-by: NFrederic Weisbecker <fweisbec@gmail.com>
Tested-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      e180a6b7
  25. 07 3月, 2009 2 次提交
    • F
      tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() · 769b0441
      由 Frederic Weisbecker 提交于 
      Impact: faster and lighter tracing

Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.

Some changes result of this:

- Previously, trace_bprintk depended of a single tracer and couldn't
  work without. This tracer has been dropped and the whole implementation
  of trace_printk() (like the module formats management) is now integrated
  in the tracing core (comes with CONFIG_TRACING), though we keep the file
  trace_printk (previously trace_bprintk.c) where we can find the module
  management. Thus we don't overflow trace.c

- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.

- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
  constants, and fix 'const' qualifiers warnings. But this is all transparent for
  developers.

- etc...

V2:

- Rebase against last changes
- Fix mispell on the changelog

V3:

- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      769b0441
    • L
      tracing: add trace_bprintk() · 1ba28e02
      由 Lai Jiangshan 提交于 
      Impact: add a generic printk() for tracing, like trace_printk()

trace_bprintk() uses the infrastructure to record events on ring_buffer.

[ fweisbec@gmail.com: ported to latest -tip, made it work if
  !CONFIG_MODULES, never free the format strings from modules
  because we can't keep track of them and conditionnaly create
  the ftrace format strings section (reported by Steven Rostedt) ]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1ba28e02
  27. 08 2月, 2009 1 次提交
  29. 03 2月, 2009 1 次提交
    • E
      modules: Use a better scheme for refcounting · 720eba31
      由 Eric Dumazet 提交于 
      Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y) is
using a lot of memory.

Each 'struct module' contains an [NR_CPUS] array of full cache lines.

This patch uses existing infrastructure (percpu_modalloc() &
percpu_modfree()) to allocate percpu space for the refcount storage.

Instead of wasting NR_CPUS*128 bytes (on i386), we now use
nr_cpu_ids*sizeof(local_t) bytes.

On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce
size of module files by about 2 Mbytes. (1Kb per module)

Instead of having all refcounters in the same memory node - with TLB misses
because of vmalloc() - this new implementation permits to have better
NUMA properties, since each  CPU will use storage on its preferred node,
thanks to percpu storage.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      720eba31
  31. 07 1月, 2009 2 次提交
    • M
      module: add within_module_core() and within_module_init() · a06f6211
      由 Masami Hiramatsu 提交于 
      This series of patches allows kprobes to probe module's __init and __exit
functions.  This means, you can probe driver initialization and
terminating.

Currently, kprobes can't probe __init function because these functions are
freed after module initialization.  And it also can't probe module __exit
functions because kprobe increments reference count of target module and
user can't unload it.  this means __exit functions never be called unless
removing probes from the module.

To solve both cases, this series of patches introduces GONE flag and sets
it when the target code is freed(for this purpose, kprobes hooks
MODULE_STATE_* events).  This also removes refcount incrementing for
allowing user to unload target module.  Users can check which probes are
GONE by debugfs interface.  For taking timing of freeing module's .init
text, these also include a patch which adds module's notifier of
MODULE_STATE_LIVE event.

This patch:

Add within_module_core() and within_module_init() for checking whether an
address is in the module .init.text section or .text section, and replace
within() local inline functions in kernel/module.c with them.

kprobes uses these functions to check where the kprobe is inserted.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a06f6211
    • A
      Remove remaining unwinder code · f1883f86
      由 Alexey Dobriyan 提交于 
      Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Gabor Gombas <gombasg@sztaki.hu>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f1883f86
  33. 22 10月, 2008 3 次提交
    • R
      param: Fix duplicate module prefixes · 9b473de8
      由 Rusty Russell 提交于 
      Instead of insisting each new module_param sysfs entry is unique,
handle the case where it already exists (for builtin modules).

The current code assumes that all identical prefixes are together in
the section: true for normal uses, but not necessarily so if someone
overrides MODULE_PARAM_PREFIX.  More importantly, it's not true with
the new "core_param()" code which uses "kernel" as a prefix.

This simplifies the caller for the builtin case, at a slight loss of
efficiency (we do the lookup every time to see if the directory
exists).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
      9b473de8
    • R
      module: check kernel param length at compile time, not runtime · 730b69d2
      由 Rusty Russell 提交于 
      The kparam code tries to handle over-length parameter prefixes at
runtime.  Not only would I bet this has never been tested, it's not
clear that truncating names is a good idea either.

So let's check at compile time.  We need to move the #define to
moduleparam.h to do this, though.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      730b69d2
    • R
      module: simplify load_module. · 5e458cc0
      由 Rusty Russell 提交于 
      Linus' recent catch of stack overflow in load_module lead me to look
at the code.  A couple of helpers to get a section address and get
objects from a section can help clean things up a little.

(And in case you're wondering, the stack size also dropped from 328 to
284 bytes).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      5e458cc0
  35. 17 10月, 2008 1 次提交
    • J
      driver core: basic infrastructure for per-module dynamic debug messages · 346e15be
      由 Jason Baron 提交于 
      Base infrastructure to enable per-module debug messages.

I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.

The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.

Future plans include extending this functionality to subsystems, that define 
their own debug levels and flags.

Usage:

Dynamic debugging is controlled by the debugfs file, 
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:

	<module_name> <enabled=0/1>
		.
		.
		.

	<module_name> : Name of the module in which the debug call resides
	<enabled=0/1> : whether the messages are enabled or not

For example:

	snd_hda_intel enabled=0
	fixup enabled=1
	driver enabled=0

Enable a module:

	$echo "set enabled=1 <module_name>" > dynamic_printk/modules

Disable a module:

	$echo "set enabled=0 <module_name>" > dynamic_printk/modules

Enable all modules:

	$echo "set enabled=1 all" > dynamic_printk/modules

Disable all modules:

	$echo "set enabled=0 all" > dynamic_printk/modules

Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.

[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      346e15be
  37. 14 10月, 2008 1 次提交
    • M
      tracing: Kernel Tracepoints · 97e1c18e
      由 Mathieu Desnoyers 提交于 
      Implementation of kernel tracepoints. Inspired from the Linux Kernel
Markers. Allows complete typing verification by declaring both tracing
statement inline functions and probe registration/unregistration static
inline functions within the same macro "DEFINE_TRACE". No format string
is required. See the tracepoint Documentation and Samples patches for
usage examples.

Taken from the documentation patch :

"A tracepoint placed in code provides a hook to call a function (probe)
that you can provide at runtime. A tracepoint can be "on" (a probe is
connected to it) or "off" (no probe is attached). When a tracepoint is
"off" it has no effect, except for adding a tiny time penalty (checking
a condition for a branch) and space penalty (adding a few bytes for the
function call at the end of the instrumented function and adds a data
structure in a separate section).  When a tracepoint is "on", the
function you provide is called each time the tracepoint is executed, in
the execution context of the caller. When the function provided ends its
execution, it returns to the caller (continuing from the tracepoint
site).

You can put tracepoints at important locations in the code. They are
lightweight hooks that can pass an arbitrary number of parameters, which
prototypes are described in a tracepoint declaration placed in a header
file."

Addition and removal of tracepoints is synchronized by RCU using the
scheduler (and preempt_disable) as guarantees to find a quiescent state
(this is really RCU "classic"). The update side uses rcu_barrier_sched()
with call_rcu_sched() and the read/execute side uses
"preempt_disable()/preempt_enable()".

We make sure the previous array containing probes, which has been
scheduled for deletion by the rcu callback, is indeed freed before we
proceed to the next update. It therefore limits the rate of modification
of a single tracepoint to one update per RCU period. The objective here
is to permit fast batch add/removal of probes on _different_
tracepoints.

Changelog :
- Use #name ":" #proto as string to identify the tracepoint in the
  tracepoint table. This will make sure not type mismatch happens due to
  connexion of a probe with the wrong type to a tracepoint declared with
  the same name in a different header.
- Add tracepoint_entry_free_old.
- Change __TO_TRACE to get rid of the 'i' iterator.

Masami Hiramatsu <mhiramat@redhat.com> :
Tested on x86-64.

Performance impact of a tracepoint : same as markers, except that it
adds about 70 bytes of instructions in an unlikely branch of each
instrumented function (the for loop, the stack setup and the function
call). It currently adds a memory read, a test and a conditional branch
at the instrumentation site (in the hot path). Immediate values will
eventually change this into a load immediate, test and branch, which
removes the memory read which will make the i-cache impact smaller
(changing the memory read for a load immediate removes 3-4 bytes per
site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it
also saves the d-cache hit).

About the performance impact of tracepoints (which is comparable to
markers), even without immediate values optimizations, tests done by
Hideo Aoki on ia64 show no regression. His test case was using hackbench
on a kernel where scheduler instrumentation (about 5 events in code
scheduler code) was added.

Quoting Hideo Aoki about Markers :

I evaluated overhead of kernel marker using linux-2.6-sched-fixes git
tree, which includes several markers for LTTng, using an ia64 server.

While the immediate trace mark feature isn't implemented on ia64, there
is no major performance regression. So, I think that we don't have any
issues to propose merging marker point patches into Linus's tree from
the viewpoint of performance impact.

I prepared two kernels to evaluate. The first one was compiled without
CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS.

I downloaded the original hackbench from the following URL:
http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c

I ran hackbench 5 times in each condition and calculated the average and
difference between the kernels.

    The parameter of hackbench: every 50 from 50 to 800
    The number of CPUs of the server: 2, 4, and 8

Below is the results. As you can see, major performance regression
wasn't found in any case. Even if number of processes increases,
differences between marker-enabled kernel and marker- disabled kernel
doesn't increase. Moreover, if number of CPUs increases, the differences
doesn't increase either.

Curiously, marker-enabled kernel is better than marker-disabled kernel
in more than half cases, although I guess it comes from the difference
of memory access pattern.

* 2 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      4.811   |       4.872  |  +0.061  |  +1.27  |
      100 |      9.854   |      10.309  |  +0.454  |  +4.61  |
      150 |     15.602   |      15.040  |  -0.562  |  -3.6   |
      200 |     20.489   |      20.380  |  -0.109  |  -0.53  |
      250 |     25.798   |      25.652  |  -0.146  |  -0.56  |
      300 |     31.260   |      30.797  |  -0.463  |  -1.48  |
      350 |     36.121   |      35.770  |  -0.351  |  -0.97  |
      400 |     42.288   |      42.102  |  -0.186  |  -0.44  |
      450 |     47.778   |      47.253  |  -0.526  |  -1.1   |
      500 |     51.953   |      52.278  |  +0.325  |  +0.63  |
      550 |     58.401   |      57.700  |  -0.701  |  -1.2   |
      600 |     63.334   |      63.222  |  -0.112  |  -0.18  |
      650 |     68.816   |      68.511  |  -0.306  |  -0.44  |
      700 |     74.667   |      74.088  |  -0.579  |  -0.78  |
      750 |     78.612   |      79.582  |  +0.970  |  +1.23  |
      800 |     85.431   |      85.263  |  -0.168  |  -0.2   |
--------------------------------------------------------------

* 4 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.586   |       2.584  |  -0.003  |  -0.1   |
      100 |      5.254   |       5.283  |  +0.030  |  +0.56  |
      150 |      8.012   |       8.074  |  +0.061  |  +0.76  |
      200 |     11.172   |      11.000  |  -0.172  |  -1.54  |
      250 |     13.917   |      14.036  |  +0.119  |  +0.86  |
      300 |     16.905   |      16.543  |  -0.362  |  -2.14  |
      350 |     19.901   |      20.036  |  +0.135  |  +0.68  |
      400 |     22.908   |      23.094  |  +0.186  |  +0.81  |
      450 |     26.273   |      26.101  |  -0.172  |  -0.66  |
      500 |     29.554   |      29.092  |  -0.461  |  -1.56  |
      550 |     32.377   |      32.274  |  -0.103  |  -0.32  |
      600 |     35.855   |      35.322  |  -0.533  |  -1.49  |
      650 |     39.192   |      38.388  |  -0.804  |  -2.05  |
      700 |     41.744   |      41.719  |  -0.025  |  -0.06  |
      750 |     45.016   |      44.496  |  -0.520  |  -1.16  |
      800 |     48.212   |      47.603  |  -0.609  |  -1.26  |
--------------------------------------------------------------

* 8 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.094   |       2.072  |  -0.022  |  -1.07  |
      100 |      4.162   |       4.273  |  +0.111  |  +2.66  |
      150 |      6.485   |       6.540  |  +0.055  |  +0.84  |
      200 |      8.556   |       8.478  |  -0.078  |  -0.91  |
      250 |     10.458   |      10.258  |  -0.200  |  -1.91  |
      300 |     12.425   |      12.750  |  +0.325  |  +2.62  |
      350 |     14.807   |      14.839  |  +0.032  |  +0.22  |
      400 |     16.801   |      16.959  |  +0.158  |  +0.94  |
      450 |     19.478   |      19.009  |  -0.470  |  -2.41  |
      500 |     21.296   |      21.504  |  +0.208  |  +0.98  |
      550 |     23.842   |      23.979  |  +0.137  |  +0.57  |
      600 |     26.309   |      26.111  |  -0.198  |  -0.75  |
      650 |     28.705   |      28.446  |  -0.259  |  -0.9   |
      700 |     31.233   |      31.394  |  +0.161  |  +0.52  |
      750 |     34.064   |      33.720  |  -0.344  |  -1.01  |
      800 |     36.320   |      36.114  |  -0.206  |  -0.57  |
--------------------------------------------------------------
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: N'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      97e1c18e
  39. 25 7月, 2008 1 次提交
  41. 22 7月, 2008 3 次提交
  43. 01 5月, 2008 2 次提交
  45. 15 2月, 2008 1 次提交
  47. 14 2月, 2008 1 次提交
    • M
      Linux Kernel Markers: support multiple probes · fb40bd78
      由 Mathieu Desnoyers 提交于 
      RCU style multiple probes support for the Linux Kernel Markers.  Common case
(one probe) is still fast and does not require dynamic allocation or a
supplementary pointer dereference on the fast path.

- Move preempt disable from the marker site to the callback.

Since we now have an internal callback, move the preempt disable/enable to the
callback instead of the marker site.

Since the callback change is done asynchronously (passing from a handler that
supports arguments to a handler that does not setup the arguments is no
arguments are passed), we can safely update it even if it is outside the
preempt disable section.

- Move probe arm to probe connection. Now, a connected probe is automatically
  armed.

Remove MARK_MAX_FORMAT_LEN, unused.

This patch modifies the Linux Kernel Markers API : it removes the probe
"arm/disarm" and changes the probe function prototype : it now expects a
va_list * instead of a "...".

If we want to have more than one probe connected to a marker at a given
time (LTTng, or blktrace, ssytemtap) then we need this patch. Without it,
connecting a second probe handler to a marker will fail.

It allow us, for instance, to do interesting combinations :

Do standard tracing with LTTng and, eventually, to compute statistics
with SystemTAP, or to have a special trigger on an event that would call
a systemtap script which would stop flight recorder tracing.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Mason <mmlnx@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: David Smith <dsmith@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fb40bd78
  49. 09 2月, 2008 1 次提交
  51. 29 1月, 2008 1 次提交