In the file x2apic_uv_x.c, some code is compiled conditionally
depending on CONFIG_SMP. However, the file is only built, if
CONFIG_X86_UV is enabled.

CONFIG_X86_UV depends on CONFIG_NUMA, which itself depends on
CONFIG_SMP, so the #ifdef will always evaluate to true, if the
file is compiled. Thus, it is unnecessary and can be removed.
Signed-off-by: NAndreas Ruprecht <rupran@einserver.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Link: http://lkml.kernel.org/r/1408522561-23389-1-git-send-email-rupran@einserver.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The enable_apic_mode() apic callback is never called, so remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302352320.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the setup_portio_remap() apic callback has been obsolete.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351480.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the multi_timer_check() apic callback has been obsolete.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302351120.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The check_apicid_present() apic callback is never called, so remove it
and functions that implement it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302350160.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the mps_oem_check() apic callback has been obsolete.  Remove it.

This allows generic_mps_oem_check() to be removed as well.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349390.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since commit b5660ba7 ("x86, platforms: Remove NUMAQ") removed NUMAQ,
the smp_callin_clear_local_apic() apic callback has been obsolete.
Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302349040.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The trampoline_phys_{high,low} members of struct apic are always
initialized to DEFAULT_TRAMPOLINE_PHYS_HIGH and TRAMPOLINE_PHYS_LOW,
respectively.  Hardwire the constants and remove the unneeded members.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302348330.17503@chino.kir.corp.google.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The value of n_lshift for UV is currently set based on the
socket m_val.

For UV3, set the n_lshift value based on the GAM_GR_CONFIG MMR.
This will allow bios to control the n_lshift value independent
of the socket m_val. Then n_lshift can be assigned a fixed value
across a multi-partition system, allowing for a fixed common
global physical address format that is independent of socket
m_val.

Cleanup unneeded macros.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/20140331143700.GB29916@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that there is only a single wait_for_init_deassert()
function, just convert the member of struct apic to a bool to
determine whether we need to wait for init_deassert to become
non-zero.

There are no more callers of default_wait_for_init_deassert(),
so fold it into the caller.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042354010.7839@chino.kir.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make uv_register_nmi_notifier() and uv_handle_nmi_ping() static
to address sparse warnings.

Fix problem where uv_nmi_kexec_failed is unused when
CONFIG_KEXEC is not defined.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20140114162551.480872353@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The UV3 hub revision ID is different than expected.  The first
revision was supposed to start at 1 but instead will start at 0.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: <stable@kernel.org> # v3.9, v3.10, v3.11
Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The current UV NMI handler has not been updated for the changes
in the system NMI handler and the perf operations.  The UV NMI
handler reads an MMR in the UV Hub to check to see if the NMI
event was caused by the external 'system NMI' that the operator
can initiate on the System Mgmt Controller.

The problem arises when the perf tools are running, causing
millions of perf events per second on very large CPU count
systems.  Previously this was okay because the perf NMI handler
ran at a higher priority on the NMI call chain and if the NMI
was a perf event, it would stop calling other NMI handlers
remaining on the NMI call chain.

Now the system NMI handler calls all the handlers on the NMI
call chain including the UV NMI handler.  This causes the UV NMI
handler to read the MMRs at the same millions per second rate.
This can lead to significant performance loss and possible
system failures.  It also can cause thousands of 'Dazed and
Confused' messages being sent to the system console.  This
effectively makes perf tools unusable on UV systems.

To avoid this excessive overhead when perf tools are running,
this code has been optimized to minimize reading of the MMRs as
much as possible, by moving to the NMI_UNKNOWN notifier chain.
This chain is called only when all the users on the standard
NMI_LOCAL call chain have been called and none of them have
claimed this NMI.

There is an exception where the NMI_LOCAL notifier chain is
used.  When the perf tools are in use, it's possible that the UV
NMI was captured by some other NMI handler and then either
ignored or mistakenly processed as a perf event.  We set a
per_cpu ('ping') flag for those CPUs that ignored the initial
NMI, and then send them an IPI NMI signal.  The NMI_LOCAL
handler on each cpu does not need to read the MMR, but instead
checks the in memory flag indicating it was pinged.  There are
two module variables, 'ping_count' indicating how many requested
NMI events occurred, and 'ping_misses' indicating how many stray
NMI events.  These most likely are perf events so it shows the
overhead of the perf NMI interrupts and how many MMR reads were avoided.

This patch also minimizes the reads of the MMRs by having the
first cpu entering the NMI handler on each node set a per HUB
in-memory atomic value.  (Having a per HUB value avoids sending
lock traffic over NumaLink.)  Both types of UV NMIs from the SMI
layer are supported.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch moves the UV NMI support from the x2apic file to a
new separate uv_nmi.c file in preparation for the next sequence
of patches. It prevents upcoming bloat of the x2apic file, and
has the added benefit of putting the upcoming /sys/module
parameters under the name 'uv_nmi' instead of 'x2apic_uv_x',
which was obscure.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.183295611@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Merge together the unicore32, arm, and x86 reboot= command line
parameter handling.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GRU hardware will support an optional distributed mode that will
allow  per-node address mapping of local GRU space, as opposed
to mapping all GRU hardware to the same contiguous high space.

If GRU distributed mode is selected, setup per-node page table
mappings.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130529155609.GB22917@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds support for the SGI UV3 hub to the common x2apic
functions.  The primary changes are to account for the similarities
between UV2 and UV3 which are encompassed within the "UVX" nomenclature.

One significant difference within UV3 is the handling of the MMIOH
regions which are redirected to the target blade (with the device) in
a different manner.  It also now has two MMIOH regions for both small and
large BARs.  This aids in limiting the amount of physical address space
removed from real memory that's used for I/O in the max config of 64TB.
Signed-off-by: NMike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130211194508.752924185@gulag1.americas.sgi.comAcked-by: NRuss Anderson <rja@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Steffen Persvold <sp@numascale.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614074954.GF3383@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since there are only two locations where cpu_mask_to_apicid() is
called from, remove the operation and use only
cpu_mask_to_apicid_and() instead.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Suggested-and-acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614074935.GE3383@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently cpu_mask_to_apicid() should not get a offline CPU with
the cpumask. Otherwise some apic drivers might try to access
non-existent per-cpu variables (i.e. x2apic). In that regard
cpu_mask_to_apicid() and cpu_mask_to_apicid_and() operations are
inconsistent.

This fix makes the two operations do not rely on calling
functions and always return the apicid for only online CPUs. As
result, the meaning and implementations of cpu_mask_to_apicid()
and cpu_mask_to_apicid_and() operations become straight.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120607131624.GG4759@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Current cpu_mask_to_apicid() and cpu_mask_to_apicid_and()
implementations have few shortcomings:

1. A value returned by cpu_mask_to_apicid() is written to
hardware registers unconditionally. Should BAD_APICID get ever
returned it will be written to a hardware too. But the value of
BAD_APICID is not universal across all hardware in all modes and
might cause unexpected results, i.e. interrupts might get routed
to CPUs that are not configured to receive it.

2. Because the value of BAD_APICID is not universal it is
counter- intuitive to return it for a hardware where it does not
make sense (i.e. x2apic).

3. cpu_mask_to_apicid_and() operation is thought as an
complement to cpu_mask_to_apicid() that only applies a AND mask
on top of a cpumask being passed. Yet, as consequence of 18374d89
commit the two operations are inconsistent in that of:
  cpu_mask_to_apicid() should not get a offline CPU with the cpumask
  cpu_mask_to_apicid_and() should not fail and return BAD_APICID
These limitations are impossible to realize just from looking at
the operations prototypes.

Most of these shortcomings are resolved by returning a error
code instead of BAD_APICID. As the result, faults are reported
back early rather than possibilities to cause a unexpected
behaviour exist (in case of [1]).

The only exception is setup_timer_IRQ0_pin() routine. Although
obviously controversial to this fix, its existing behaviour is
preserved to not break the fragile check_timer() and would
better addressed in a separate fix.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120607131559.GF4759@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120607131449.GC4759@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120605112324.GA11449@dhcp-26-207.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We know both register and value for eoi beforehand,
so there's no need to check it and no need to do math
to calculate the msr. Saves instructions/branches
on each EOI when using x2apic.

I looked at the objdump output to verify that the
generated code looks right and actually is shorter.

The real improvemements will be on the KVM guest side
though, those come in a later patch.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: gleb@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/e019d1a125316f10d3e3a4b2f6bda41473f4fb72.1337184153.git.mst@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add eoi_write callback so that kvm can override
eoi accesses without touching the rest of the apic.
As a side-effect, this will enable a micro-optimization
for apics using msr.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: gleb@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/0df425d746c49ac2ecc405174df87752869629d2.1337184153.git.mst@redhat.com
[ tidied it up a bit ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

As suggested by Suresh Siddha and Yinghai Lu:

For x2apic pre-enabled systems, apic driver is set already early
through early_acpi_boot_init()/early_acpi_process_madt()/
acpi_parse_madt()/default_acpi_madt_oem_check() path so that
apic_id_valid() checking will be sufficient during MADT and SRAT
parsing.

For non-x2apic pre-enabled systems, all apic ids should be less
than 255.

This allows us to substitute the checks in
arch/x86/kernel/acpi/boot.c::acpi_parse_x2apic() and
arch/x86/mm/srat.c::acpi_numa_x2apic_affinity_init() with
apic->apic_id_valid().

In addition we can avoid feigning the x2apic cpu feature in the
NumaChip apic code.

The following apic drivers have separate apic_id_valid()
functions which will accept x2apic type IDs :

 x2apic_phys
 x2apic_cluster
 x2apic_uv_x
 apic_numachip
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1331925935-13372-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Move APIC ID validity check into platform APIC code, so it can
be overridden when needed. For NumaChip systems, always trust
MADT, as it's constructed with high APIC IDs.

Behaviour verifies on standard x86 systems and on NumaChip
systems with this, and compile-tested with allyesconfig.
Signed-off-by: NDaniel J Blueman <daniel@numascale-asia.com>
Reviewed-by: NSteffen Persvold <sp@numascale.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1331709454-27966-1-git-send-email-daniel@numascale-asia.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

SGI UV systems print a message during boot:

	UV: Found <num> blades

Due to packaging changes, the blade count is not accurate for
on the next generation of the platform. This patch corrects the
count.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120106191900.GA19772@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

There was a mixup when the SGI UV2 hub chip was sent to be
fabricated, and it ended up with the wrong part number in the
HRP_NODE_ID mmr. Future versions of the chip will (may) have the
correct part number. Change the UV infrastructure to recognize
both part numbers as valid IDs of a UV2 hub chip.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Just convert all the files that have an nmi handler to the new routines.
Most of it is straight forward conversion.  A couple of places needed some
tweaking like kgdb which separates the debug notifier from the nmi handler
and mce removes a call to notify_die.

[Thanks to Ying for finding out the history behind that mce call

https://lkml.org/lkml/2010/5/27/114

And Boris responding that he would like to remove that call because of it

https://lkml.org/lkml/2011/9/21/163]

The things that get converted are the registeration/unregistration routines
and the nmi handler itself has its args changed along with code removal
to check which list it is on (most are on one NMI list except for kgdb
which has both an NMI routine and an NMI Unknown routine).
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NCorey Minyard <minyard@acm.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Delete the 10 msec delay between the INIT and SIPI when starting
slave cpus. I can find no requirement for this delay. BIOS also
has similar code sequences without the delay.

Removing the delay reduces boot time by 40 sec. Every bit helps.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

When I added 3448a19d
I forgot about the special uv handling code for this, so this
patch fixes it up.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Ingo Molnar
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds support for a new version of the SGI UV hub
chip. The hub chip is the node controller that connects multiple
blades into a larger coherent SSI.

For the most part, UV2 is compatible with UV1. The majority of
the changes are in the addresses of MMRs and in a few cases, the
contents of MMRs. These changes are the result in changes in the
system topology such as node configuration, processor types,
maximum nodes, physical address sizes, etc.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Apic probe now looks at the apic drivers listed in the
.apicdrivers section. Remove apic_probe[] and make each apic
driver static.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This will pave the way for each apic driver to be self-contained
and eliminate the need for apic_probe[].

Order in which apic drivers are listed in the .apicdrivers
section is important, as this determines the apic probe order.
And this is enforced by the ordering of apic driver files in the
Makefile and the macros apic_driver()/apic_drivers().
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This fixes problems seen on UV systems handling NMIs from the
node controller.

I isolated the "dazed..." messages that I saw earlier to a bug in
the BMC on our platform. It was sending NMIs w/o properly setting
a register that indicated the source of NMI.

So rather than _assuming_ any unhandled NMI came from the UV system
maintenance console (SMC), add a check to verify that the SMC actually
sent the NMI.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: gorcunov@gmail.com
Cc: dzickus@redhat.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After a crash dump on an SGI Altix UV system the crash kernel
fails to cause a reboot.  EFI mode is disabled in the kdump
kernel, so only the reboot_type of BOOT_ACPI works.
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Cc: rja@sgi.com
LKML-Reference: <E1Q5Iuo-00013b-UK@eag09.americas.sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>