As commit 592201a9 (ARM: Thumb-2: Support Thumb-2 in undefined
instruction handler) says:

    32-bit Thumb instructions are specified in the form:
        ((first_half << 16 ) | second_half)
    which matches the layout used by the ARM ARM.

Convert the ftrace code to use the same format to avoid the usage of
different formats in kernel code.
Acked-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Before replacing an instruction, the ftrace code determines what the old
instruction should be and verifies that that's what's really there in
memory before replacing it.  This is useful if for example a bug in
mcountrecord causes it to record wrong locations.

However, in cases where we replace call sites in entry-common.S, these
checks are not needed.  For these, we currently just memcpy() the memory
content and then "verify" it -- this is quite useless and can be
removed.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The kexec machine crash code can be called in interrupt context via a
sysrq trigger made using the magic key combination. If the irq chip
dealing with the serial interrupt is using the fasteoi flow handler,
then we will never EOI the interrupt because the interrupt handler will
be fatal. In the case of a GIC, this results in the crash kernel not
receiving interrupts on that CPU interface.

This patch adds code (based on the PowerPC implementation) to EOI any
pending interrupts on the crash CPU before masking and disabling all
interrupts. Secondary cores are not a problem since they are placed into
a cpu_relax() loop via an IPI.
Reported-by: NLei Wen <leiwen@marvell.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On Versatile Express, the PCI Express buses are broken and unusable, so
we aren't going to support PCI/ISA IO cycles on this platform.  Remove
the PCI/ISA IO inb et.al. support for this platform.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid potential build problems caused by lacking mach/irqs.h includes
on non-OF builds caused by an errant include in asm/prom.h.  asm/prom.h
requires nothing from asm/irq.h, as Grant says:

On Mon, Feb 06, 2012 at 05:56:23AM +0000, Grant Likely wrote:
> On Sat, Feb 04, 2012 at 10:17:48PM +0000, Russell King wrote:
> > Finally, do we need asm/irq.h in our asm/prom.h ?  That's causing
> > fragility between DT and non-DT builds, because people are finding
> > that their DT builds work without their mach/irqs.h includes but
> > fail when built with non-DT.  The only thing which DT might need -
> > at the most - is NR_IRQS, but I'd hope with things like irq domains
> > it doesn't actually require it.
>
> I don't think so.  There may be a file or two that break because they're
> not including everything they need, but I don't think anything in the
> header requires it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Print debug information on user faults for SIGBUS if user_debug = 16
in the kernel command line.

Reference: <1327333344-26340-1-git-send-email-javi.merino@arm.com>
Signed-off-by: NJavi Merino <javi.merino@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The irq_start and hwirq_base assignment code is fairly hairy and ended
up being difficult to read following a conflict resolution for 3.2.

This patch rearranges the code slightly to make it easier to read.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ARM unconditionally selects CONFIG_GENERIC_HARDIRQS, so the definition
of for_each_irq_desc will check that the desc is non-NULL anyway.

This patch removes a redundant check from the IRQ migration code.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Cortex-A7 implements an ARMv7-compatible PMU compliant with the PMUv2
architecture specification.

This patch adds support for the PMU to the ARM perf backend.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Ensure that the software state for sched_clock() is updated at the
point of suspend so that we avoid losing ticks since the last update.

This prevents the platform dependent possibility that sched_clock()
may appear to go backwards across a suspend/resume cycle.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the compiled ISA to oops dumps, along side the preempt/smp
configuration.  This allows us to see immediately whether the kernel
was compiled for Thumb-2 or not.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The compiler does not conditionalize the assembly instructions for
the tlb operations, which leads to sub-optimal code being generated
when building a kernel for multiple CPUs.

We can tweak things fairly simply as the code fragment below shows:

    17f8:       e3120001        tst     r2, #1  ; 0x1
...
    1800:       0a000000        beq     1808 <handle_pte_fault+0x194>
    1804:       ee061f10        mcr     15, 0, r1, cr6, cr0, {0}
    1808:       e3120004        tst     r2, #4  ; 0x4
    180c:       0a000000        beq     1814 <handle_pte_fault+0x1a0>
    1810:       ee081f36        mcr     15, 0, r1, cr8, cr6, {1}
becomes:
    17f0:       e3120001        tst     r2, #1  ; 0x1
    17f4:       1e063f10        mcrne   15, 0, r3, cr6, cr0, {0}
    17f8:       e3120004        tst     r2, #4  ; 0x4
    17fc:       1e083f36        mcrne   15, 0, r3, cr8, cr6, {1}

Overall, for Realview with V6 and V7 CPUs configured:

   text    data     bss     dec     hex filename
4153998  207340 5371036 9732374  948116 ../build/realview/vmlinux.before
4153366  207332 5371036 9731734  947e96 ../build/realview/vmlinux.after
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This line is irritating and wrong when modules are not supported, so
don't show it then.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Wire up support for the XZ decompressor
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds some endianness-agnostic helpers to convert machine
instructions between canonical integer form and in-memory
representation.

A canonical integer form for representing instructions is also
formalised here.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that we can select a sched_clock at runtime, let's implement
it for the Integrator AP, default-select the one found in all
other board it for all plat-versatile boards and make the right
clock kick in at runtime.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The current user mapping for the vectors page is inserted as a `horrible
hack vma' into each task via arch_setup_additional_pages. This causes
problems with the MM subsystem and vm_normal_page, as described here:

https://lkml.org/lkml/2012/1/14/55

Following the suggestion from Hugh in the above thread, this patch uses
the gate_vma for the vectors user mapping, therefore consolidating
the horrible hack VMAs into one.
Acked-and-Tested-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than open-coding the jiffy-based wait, and polling for the
secondary CPU to come online, use a completion instead.  This
removes the need to poll, instead we will be notified when the
secondary CPU has initialized.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Initialize the contents of the vectors page immediately after we
allocate the page, but before we map it.  This avoids any possible
aliases with other mappings which may need to be flushed after the
page has been mapped irrespective of the cache type.

We follow this later with a flush_cache_all() after all static memory
mappings have been initialized, which ensures that this is safe from
any cache effects.
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a new seqfile for reporting coherent DMA allocations.  This contains
the address range, size and the function which was used to allocate
each region, allowing these allocations to be viewed in much the same
way as /proc/vmallocinfo.

The DMA coherent region has limited space, so this allows allocation
failures to be viewed, as well as finding out how much space is being
used.

Make sure this file is only readable by root - same as vmallocinfo - to
prevent information leakage.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This updates the Integrator defconfig to include the hardware
found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further
the sometimes disrupting VGA_CONSOLE is disabled (those who
have a VGA card can enable it) and typical default VFAT
layouts of the MMC cards are supported by enabling VFAT and
CP437 encoding of the file system.

After this my default kernels boot successfully on Integrator
AP and CP alike.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield

gpio bug fixes for v3.3

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: Use correct offset for gpio initialization
  gpio/it8761e: Restrict it8761e gpio driver to x86.
  gpio-ml-ioh: cleanup __iomem annotation usage
  gpio-ml-ioh: cleanup NULL pointer checking
  gpio-pch: cleanup __iomem annotation usage
  gpio-pch: cleanup NULL pointer checking

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  vfs: remove printk from set_nlink()
  wake up s_wait_unfrozen when ->freeze_fs fails

In checkin

  303395ac x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Reported-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  MPILIB: Add a missing ENOMEM check

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname
is not going to be NULL, TYVM...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Permit key_serial() to be called with a const key pointer.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Replace the rcu_assign_pointer() calls with rcu_assign_keypointer().
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().

Changelog v1:
- Change __cred to just cred (based on David Howell's comment)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528b ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Analyzed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a missing ENOMEM check.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...

This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...