- 01 11月, 2016 18 次提交
-
-
由 Parthasarathy Bhuvaragan 提交于
In this commit, we create a new tipc socket state TIPC_OPEN in sk_state. We primarily replace the SS_UNCONNECTED sock->state with TIPC_OPEN. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, tipc maintains probing state for connected sockets in tsk->probing_state variable. In this commit, we express this information as socket states and this remove the variable. We set probe_unacked flag when a probe is sent out and reset it if we receive a reply. Instead of the probing state TIPC_CONN_OK, we create a new state TIPC_ESTABLISHED. There is no functional change in this commit. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, tipc maintains the socket state in sock->state variable. This is used to maintain generic socket states, but in tipc we overload it and save tipc socket states like TIPC_LISTEN. Other protocols like TCP, UDP store protocol specific states in sk->sk_state instead. In this commit, we : - declare a new tipc state TIPC_LISTEN, that replaces SS_LISTEN - Create a new function tipc_set_state(), to update sk->sk_state. - TIPC_LISTEN state is maintained in sk->sk_state. - replace references to SS_LISTEN with TIPC_LISTEN. There is no functional change in this commit. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, tipc socket state SS_READY declares that the socket is a connectionless socket. In this commit, we remove the state SS_READY and replace it with a condition which returns true for datagram / connectionless sockets. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, probing_intv is a variable in struct tipc_sock but is always set to a constant CONN_PROBING_INTERVAL. The socket connection is probed based on this value. In this commit, we remove this variable and setup the socket timer based on the constant CONN_PROBING_INTERVAL. There is no functional change in this commit. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, we determine if a socket is connected or not based on tsk->connected, which is set once when the probing state is set to TIPC_CONN_OK. It is unset when the sock->state is updated from SS_CONNECTED to any other state. In this commit, we remove connected variable from tipc_sock and derive socket connection status from the following condition: sock->state == SS_CONNECTED => tsk->connected There is no functional change in this commit. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, for connectionless sockets the peer information during connect is stored in tsk->peer and a connection state is set in tsk->connected. This is redundant. In this commit, for connectionless sockets we update: - __tipc_sendmsg(), when the destination is NULL the peer existence is determined by tsk->peer.family, instead of tsk->connected. - tipc_connect(), remove set/unset of tsk->connected. Hence tsk->connected is no longer used for connectionless sockets. There is no functional change in this commit. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, the peer information for connect is stored in tsk->remote but the rest of code uses the name peer for peer/remote. In this commit, we rename tsk->remote to tsk->peer to align with naming convention followed in the rest of the code. There is no functional change in this commit. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
In this commit, we rename handle to bytes_read indicating the purpose of the member. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, tipc_accept() calls sk_alloc() with kern=1. This is incorrect as the data socket's owner is the user application. Thus for these accepted data sockets the network namespace refcount is skipped. In this commit, we fix this by setting kern=0. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, in filter_connect() when we terminate a connection due to an error message from peer, we set the socket state to DISCONNECTING. The socket is notified about this broken connection using EPIPE when a user tries to send a message. However if a socket was waiting on a poll() while the connection is being terminated, we fail to wakeup that socket. In this commit, we wakeup sleeping sockets at connection termination. Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
Until now, in stream/mcast send() we pass the message to the link layer even when the link is congested and add the socket to the link's wakeup queue. This is unnecessary for non-blocking sockets. If a socket is set to non-blocking and sends multicast with zero back off time while receiving EAGAIN, we exhaust the memory. In this commit, we return immediately at stream/mcast send() for non-blocking sockets. Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
When we receive a PIM Hello message on a port we can consider that it has a multicast router attached, thus it is correct to add it to the router list. The only catch is it shouldn't be considered for a querier. Using Daniel's description: leaf-11 leaf-12 leaf-13 \ | / bridge-1 / \ host-11 host-12 - all ports in bridge-1 are in a single vlan aware bridge - leaf-11 is the IGMP querier - leaf-13 is the PIM DR - host-11 TXes packets to 226.10.10.10 - bridge-1 only forwards the 226.10.10.10 traffic out the port to leaf-11, it should also forward this traffic out the port to leaf-13 Suggested-by: NDaniel Walton <dwalton@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds support for setting and using XPS when QoS via traffic classes is enabled. With this change we will factor in the priority and traffic class mapping of the packet and use that information to correctly select the queue. This allows us to define a set of queues for a given traffic class via mqprio and then configure the XPS mapping for those queues so that the traffic flows can avoid head-of-line blocking between the individual CPUs if so desired. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch updates the code for removing queues from the XPS map and makes it so that we can apply the code any time we change either the number of traffic classes or the mapping of a given block of queues. This way we avoid having queues pulling traffic from a foreign traffic class. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Add a sysfs attribute for a Tx queue that allows us to determine the traffic class for a given queue. This will allow us to more easily determine this in the future. It is needed as XPS will take the traffic class for a group of queues into account in order to avoid pulling traffic from one traffic class into another. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The functions for configuring the traffic class to queue mappings have other effects that need to be addressed. Instead of trying to export a bunch of new functions just relocate the functions so that we can instrument them directly with the functionality they will need. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2016 1 次提交
-
-
由 Andrey Vagin 提交于
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndrei Vagin <avagin@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2016 15 次提交
-
-
由 pravin shelar 提交于
This patch fixes a typo in unregister operation. Following crash is fixed by this patch. It can be easily reproduced by repeating modprobe and rmmod module that uses genetlink. [ 261.446686] BUG: unable to handle kernel paging request at ffffffffa0264088 [ 261.448921] IP: [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.450494] PGD 1c09067 [ 261.451266] PUD 1c0a063 [ 261.452091] PMD 8068d5067 [ 261.452525] PTE 0 [ 261.453164] [ 261.453618] Oops: 0000 [#1] SMP [ 261.454577] Modules linked in: openvswitch(+) ... [ 261.480753] RIP: 0010:[<ffffffff813cb70e>] [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.483069] RSP: 0018:ffffc90003c0bc28 EFLAGS: 00010282 [ 261.510145] Call Trace: [ 261.510896] [<ffffffff816f10ca>] genl_family_find_byname+0x5a/0x70 [ 261.512819] [<ffffffff816f2319>] genl_register_family+0xb9/0x630 [ 261.514805] [<ffffffffa02840bc>] dp_init+0xbc/0x120 [openvswitch] [ 261.518268] [<ffffffff8100217d>] do_one_initcall+0x3d/0x160 [ 261.525041] [<ffffffff811808a9>] do_init_module+0x60/0x1f1 [ 261.526754] [<ffffffff8110687f>] load_module+0x22af/0x2860 [ 261.530144] [<ffffffff81107026>] SYSC_finit_module+0x96/0xd0 [ 261.531901] [<ffffffff8110707e>] SyS_finit_module+0xe/0x10 [ 261.533605] [<ffffffff8100391e>] do_syscall_64+0x6e/0x180 [ 261.535284] [<ffffffff817c2faf>] entry_SYSCALL64_slow_path+0x25/0x25 [ 261.546512] RIP [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.550198] ---[ end trace 76505a814dd68770 ]--- Fixes: 2ae0f17d ("genetlink: use idr to track families"). Reported-by: NJarno Rajahalme <jarno@ovn.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NPravin B Shelar <pshelar@ovn.org> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In commit 2d18ac4b ("tipc: extend broadcast link initialization criteria") we tried to fix a problem with the initial synchronization of broadcast link acknowledge values. Unfortunately that solution is not sufficient to solve the issue. We have seen it happen that LINK_PROTOCOL/STATE packets with a valid non-zero unicast acknowledge number may bypass BCAST_PROTOCOL initialization, NAME_DISTRIBUTOR and other STATE packets with invalid broadcast acknowledge numbers, leading to premature opening of the broadcast link. When the bypassed packets finally arrive, they are inadvertently accepted, and the already correctly initialized acknowledge number in the broadcast receive link is overwritten by the invalid (zero) value of the said packets. After this the broadcast link goes stale. We now fix this by marking the packets where we know the acknowledge value is or may be invalid, and then ignoring the acks from those. To this purpose, we claim an unused bit in the header to indicate that the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR packets, plus those LINK_PROTOCOL packets sent out before the broadcast links are fully synchronized. This minor protocol update is fully backwards compatible. Reported-by: NJohn Thompson <thompa.atl@gmail.com> Tested-by: NJohn Thompson <thompa.atl@gmail.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Document the possible state transitions for a BBR flow, and also add a prose summary of the state machine, covering the life of a typical BBR flow. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 shamir rabinovitch 提交于
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages. This option cause the rds Makefile to add -DDEBUG to the rds gcc command line. When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by include/linux/dynamic_debug.h to decide if dynamic debug prints should be sent by default to the kernel log. rds should not enable this macro for production builds. rds dynamic debug work as expected follow this fix. Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
netdev_walk_all_lower_dev is not properly walking the lower device list. Commit 1a3f060c made netdev_walk_all_lower_dev similar to netdev_walk_all_upper_dev_rcu and netdev_walk_all_lower_dev_rcu but failed to update its netdev_next_lower_dev iterator. This patch fixes that. Fixes: 1a3f060c ("net: Introduce new api for walking upper and lower devices") Reported-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Tested-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Per listen(fd, backlog) rules, there is really no point accepting a SYN, sending a SYNACK, and dropping the following ACK packet if accept queue is full, because application is not draining accept queue fast enough. This behavior is fooling TCP clients that believe they established a flow, while there is nothing at server side. They might then send about 10 MSS (if using IW10) that will be dropped anyway while server is under stress. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When transmitting on a packet socket with PACKET_VNET_HDR and PACKET_QDISC_BYPASS, validate device support for features requested in vnet_hdr. Drop TSO packets sent to devices that do not support TSO or have the feature disabled. Note that the latter currently do process those packets correctly, regardless of not advertising the feature. Because of SKB_GSO_DODGY, it is not sufficient to test device features with netif_needs_gso. Full validate_xmit_skb is needed. Switch to software checksum for non-TSO packets that request checksum offload if that device feature is unsupported or disabled. Note that similar to the TSO case, device drivers may perform checksum offload correctly even when not advertising it. When switching to software checksum, packets hit skb_checksum_help, which has two BUG_ON checksum not in linear segment. Packet sockets always allocate at least up to csum_start + csum_off + 2 as linear. Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c ethtool -K eth0 tso off tx on psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N ethtool -K eth0 tx off psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N v2: - add EXPORT_SYMBOL_GPL(validate_xmit_skb_list) Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Use nla_parse_nested instead of open-coding the call to nla_parse() with the attribute data/len. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Instead of storing return value in 'err' and returning, just return directly. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Wrap several common instances of: kmemdup(nla_data(attr), nla_len(attr), GFP_KERNEL); Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The newly added raw_diag.c fails to build in some configurations unless we include this header: In file included from net/ipv4/raw_diag.c:6:0: include/net/raw.h:71:21: error: field 'inet' has incomplete type net/ipv4/raw_diag.c: In function 'raw_diag_dump': net/ipv4/raw_diag.c:166:29: error: implicit declaration of function 'inet_sk' Fixes: 432490f9 ("net: ip, diag -- Add diag interface for raw sockets") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eli Cooper 提交于
This patch updates skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit() when an IPv6 header is installed to a socket buffer. This is not a cosmetic change. Without updating this value, GSO packets transmitted through an ipip6 tunnel have the protocol of ETH_P_IP and skb_mac_gso_segment() will attempt to call gso_segment() for IPv4, which results in the packets being dropped. Fixes: b8921ca8 ("ip4ip6: Support for GSO/GRO") Signed-off-by: NEli Cooper <elicooper@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Craig Gallek 提交于
As part of a series to implement faster SO_REUSEPORT lookups, commit 086c653f ("sock: struct proto hash function may error") added return values to protocol hash functions and commit 496611d7 ("inet: create IPv6-equivalent inet_hash function") implemented a new hash function for IPv6. However, the latter does not respect the former's convention. This properly propagates the hash errors in the IPv6 case. Fixes: 496611d7 ("inet: create IPv6-equivalent inet_hash function") Reported-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NCraig Gallek <kraig@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Andrey Konovalov reported that KASAN detected that SCTP was using a slab beyond the boundaries. It was caused because when handling out of the blue packets in function sctp_sf_ootb() it was checking the chunk len only after already processing the first chunk, validating only for the 2nd and subsequent ones. The fix is to just move the check upwards so it's also validated for the 1st chunk. Reported-by: NAndrey Konovalov <andreyknvl@google.com> Tested-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2016 1 次提交
-
-
由 Colin Ian King 提交于
Some of the pr_* messages are missing spaces, so insert these and also unbreak multi-line literal strings in pr_* messages Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2016 5 次提交
-
-
由 Arnd Bergmann 提交于
gcc -Wmaybe-uninitialized reports a bug in aes_siv_encryp: net/mac80211/fils_aead.c: In function ‘aes_siv_encrypt.constprop’: net/mac80211/fils_aead.c:84:26: error: ‘tfm2’ may be used uninitialized in this function [-Werror=maybe-uninitialized] At the time that the memory allocation fails, 'tfm2' has not been allocated, so we should not attempt to free it later, and we can simply return an error. Fixes: 39404fee ("mac80211: FILS AEAD protection for station mode association frames") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrey Vagin 提交于
No one can see these events, because a network namespace can not be destroyed, if it has sockets. Unlike other devices, uevent-s for network devices are generated only inside their network namespaces. They are filtered in kobj_bcast_filter() My experiments shows that net namespaces are destroyed more 30% faster with this optimization. Here is a perf output for destroying network namespaces without this patch. - 94.76% 0.02% kworker/u48:1 [kernel.kallsyms] [k] cleanup_net - 94.74% cleanup_net - 94.64% ops_exit_list.isra.4 - 41.61% default_device_exit_batch - 41.47% unregister_netdevice_many - rollback_registered_many - 40.36% netdev_unregister_kobject - 14.55% device_del + 13.71% kobject_uevent - 13.04% netdev_queue_update_kobjects + 12.96% kobject_put - 12.72% net_rx_queue_update_kobjects kobject_put - kobject_release + 12.69% kobject_uevent + 0.80% call_netdevice_notifiers_info + 19.57% nfsd_exit_net + 11.15% tcp_net_metrics_exit + 8.25% rpcsec_gss_exit_net It's very critical to optimize the exit path for network namespaces, because they are destroyed under net_mutex and many namespaces can be destroyed for one iteration. v2: use dev_set_uevent_suppress() Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndrei Vagin <avagin@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Daniel says: While trying out [1][2], I noticed that tc monitor doesn't show the correct handle on delete: $ tc monitor qdisc clsact ffff: dev eno1 parent ffff:fff1 filter dev eno1 ingress protocol all pref 49152 bpf handle 0x2a [...] deleted filter dev eno1 ingress protocol all pref 49152 bpf handle 0xf3be0c80 some context to explain the above: The user identity of any tc filter is represented by a 32-bit identifier encoded in tcm->tcm_handle. Example 0x2a in the bpf filter above. A user wishing to delete, get or even modify a specific filter uses this handle to reference it. Every classifier is free to provide its own semantics for the 32 bit handle. Example: classifiers like u32 use schemes like 800:1:801 to describe the semantics of their filters represented as hash table, bucket and node ids etc. Classifiers also have internal per-filter representation which is different from this externally visible identity. Most classifiers set this internal representation to be a pointer address (which allows fast retrieval of said filters in their implementations). This internal representation is referenced with the "fh" variable in the kernel control code. When a user successfuly deletes a specific filter, by specifying the correct tcm->tcm_handle, an event is generated to user space which indicates which specific filter was deleted. Before this patch, the "fh" value was sent to user space as the identity. As an example what is shown in the sample bpf filter delete event above is 0xf3be0c80. This is infact a 32-bit truncation of 0xffff8807f3be0c80 which happens to be a 64-bit memory address of the internal filter representation (address of the corresponding filter's struct cls_bpf_prog); After this patch the appropriate user identifiable handle as encoded in the originating request tcm->tcm_handle is generated in the event. One of the cardinal rules of netlink rules is to be able to take an event (such as a delete in this case) and reflect it back to the kernel and successfully delete the filter. This patch achieves that. Note, this issue has existed since the original TC action infrastructure code patch back in 2004 as found in: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/ [1] http://patchwork.ozlabs.org/patch/682828/ [2] http://patchwork.ozlabs.org/patch/682829/ Fixes: 4e54c4816bfe ("[NET]: Add tc extensions infrastructure.") Reported-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
gcc warns about an uninitialized pointer dereference in the vlan priority handling: net/core/flow_dissector.c: In function '__skb_flow_dissect': net/core/flow_dissector.c:281:61: error: 'vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] As pointed out by Jiri Pirko, the variable is never actually used without being initialized first as the only way it end up uninitialized is with skb_vlan_tag_present(skb)==true, and that means it does not get accessed. However, the warning hints at some related issues that I'm addressing here: - the second check for the vlan tag is different from the first one that tests the skb for being NULL first, causing both the warning and a possible NULL pointer dereference that was not entirely fixed. - The same patch that introduced the NULL pointer check dropped an earlier optimization that skipped the repeated check of the protocol type - The local '_vlan' variable is referenced through the 'vlan' pointer but the variable has gone out of scope by the time that it is accessed, causing undefined behavior Caching the result of the 'skb && skb_vlan_tag_present(skb)' check in a local variable allows the compiler to further optimize the later check. With those changes, the warning also disappears. Fixes: 3805a938 ("flow_dissector: Check skb for VLAN only if skb specified.") Fixes: d5709f7a ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NEric Garver <e@erig.me> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Similar to IPv4, do not consider link state when validating next hops. Currently, if the link is down default routes can fail to insert: $ ip -6 ro add vrf blue default via 2100:2::64 dev eth2 RTNETLINK answers: No route to host With this patch the command succeeds. Fixes: 8c14586f ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-