- 12 9月, 2005 40 次提交
-
-
由 Martin Habets 提交于
SPARC DBRI driver This patch contains the following fixes to the Alsa DBRI driver: - Remove 2.6.13 build warning on the prom_getproperty() call. - Rework command synchronization: send a sequence number with D_WAIT, and check it in the completion interrupt. Move synchronization delays from _cmdsend() to _cmdlock() allowing the CPU to do other usefull things while the DBRI is processing the commands. - Fix first argument of printk() calls. - Enable burst transfers for DBRI. Original 2.4 patch from Krzysztof Helt - Make dbri_debug module parameter writable from sysfs. Remove obsolete write access to the /proc debug file. - Replace udelay() with msleep_interruptible() where possible. - Update documentation comments. Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 James Courtier-Dutton 提交于
EMU10K1/EMU10K2 driver The card does not have an AC97 chip. .subsystem = 0x80611102 Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Takashi Iwai 提交于
PCM Midlevel Revive snd_pcm_format_cpu_endian() document. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3 OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth USB generic driver,USB USX2Y Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ES18xx driver,OPL3SA2 driver,AD1816A driver,AD1848 driver,CS4231 driver ES1688 driver,GUS Library,Opti9xx drivers,EMU8000 driver SB16/AWE driver,SB drivers Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ALSA sequencer,Instrument layer,ALSA<-OSS sequencer Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Control Midlevel,ALSA Core,HWDEP Midlevel,PCM Midlevel,RawMidi Midlevel Timer Midlevel,ALSA<-OSS emulation Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Added ASUS A6 support for ALC880 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,Intel8x0 driver Added buggy_semaphore module option to snd-intel8x0 driver for a workaround for hardwards with buggy codec semaphores. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,ALSA<-OSS emulation Added 'buggy-ptr' proc option to switch the behavior of GETOPTR ioctl. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
PPC,PPC Tumbler driver Added AUTO_DRC kernel config to enable/disable the auto-DRC-toggle feature on tumbler/snapper. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fix a bug of modem PCM creation (due to a typo). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiri Slaby 提交于
Memalloc module,CS46xx driver,VIA82xx driver,ALI5451 driver au88x0 driver Replace pci_find_device() with pci_get_device() and pci_dev_put(). Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver Remove superfluous PCI ID definitions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
PCM Midlevel,RawMidi Midlevel Fix DocBook warnings. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA Intel driver,HDA generic driver Assign audio PCMs first before modem PCMs. The modem stream is assigned up to device #6, to be consistent over different models. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vincent Pelletier 提交于
PPC PMAC driver Here is a patch to correct detection of the soundcard on my iBook model (bought really recently). Without that fix, there were only andui in the headphone, and the mixer was totaly non functional. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
ALSA Core,ALSA sequencer Add an option to make the RTC timer the default sequencer timer. This becomes necessary for precise MIDI timing when the system timer runs at less than 1000 Hz. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver Wavefront drivers - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ARM,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,MIPS MIPS AU1x00 driver,PPC,PPC PowerMac driver,SPARC,SPARC AMD7930 driver SPARC cs4231 driver,SPARC DBRI driver - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ALSA Core A new function snd_card_set_generic_dev() is introduced to add the 'generic device' support for devices without proper bus on sysfs. It's a last resort, and should be removed in future when they have a proper bus, instead. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation Update/fix ALSA document. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Check the validity of the current DMA position when position_fix=0 (auto) is set. If the DMA position overcomes the threshold, the driver changes the fix behavior automatically to use POSBUF. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ARM AACI PL041 driver,PARISC Harmony driver Added snd_card_set_dev() calls to register the device pointer for the card. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Davide Libenzi 提交于
HDA Codec driver Add the subsystem PCI devid to the list (on top of 2.6.13). Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Opti9xx drivers When clearing some bits in a register, don't bother with the bits that won't be changed anyway. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver Add sparse annotations where we do strange this with __iomem/__user pointers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add the SNDRV_PCM_INFO_BATCH flag to the PCM hardware information to indicate that the driver uses double buffering. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 James Courtier-Dutton 提交于
CA0106 driver,EMU10K1/EMU10K2 driver A thread appeared on the LKML. This patch implements the fix. Question: in sysfs, /sys/bus/*/drivers lists the driver names, with their exported .name (eg. '.name = 'EMU10K1_Audigy'' in the module code, from now on 'driver name'). In /sys/modules, the kernel modules are listed with their module name, eg. snd_emu10k1. However, it seems to me that in sysfs, there is no way in particular to tell, which module has which .name. That is, that snd_emu10k1 is EMU10K1_Audigy and vice versa. I wonder whether it wouldn't be possible to add a symlink to the particular module from the driver, and/or from the module to the driver, so the list of devices handled by the module and the module name would be accessible. This way, I would know which driver name corresponds to which module name and vice versa. Answer: For PCI drivers, just add the line: .owner = THIS_MODULE, to their struct pci_driver definition and you will get the symlink created for you. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Takashi Iwai 提交于
AC97 Codec Fix the internal speaker problem (e.g. Targa Traveller 826) with ALC658D codec. The info is taken from Cyberlink/realtek-modified code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
RME HDSP driver When using the kernel firmware loader, initialize the card shortname before registering the card with ALSA to prevent it from using a default card ID. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Documentation move the AD1889 driver docs to the kernel tree, too Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Intel8x0 driver Added ac97_quirk entry for IBM NetVisa A30p. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ATIIXP driver Fixed PM resume on atiixp driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
PCI drivers,AD1889 driver move the AD1889 driver to the kernel tree Acked-by: NThibaut Varene <varenet@parisc-linux.org> Acked-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
AC97 Codec Fix pin47 setting for EAPD control on MSI S270 laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 James Courtier-Dutton 提交于
CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Linus Torvalds 提交于
-
由 Tony Luck 提交于
-