- 12 3月, 2011 4 次提交
-
-
由 Carolyn Wyborny 提交于
This patch adds functions and functions pointers to accommodate differences between NVM interfaces and options for i350 devices, 82580 devices and the rest. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch adds the EEE feature for i350 devices, enabled by default. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Change the driver string to match the PF driver string format. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The kernel version string is off by a major version number since new silicon was just introduced and also uses the wrong format for the version postfix. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 3月, 2011 25 次提交
-
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
The driver doesn't support Wake-on-ARP, so don't advertise through ethtool that it does. Cleanup some coding style issues in the same functions. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
If/when an OEM enables MACsec in the 82579 EEPROM, disable jumbo frames support in the driver due to an interoperability issue in hardware that prevents jumbo packets from being transmitted or received. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
When PHY reset is intentionally blocked on 82577/8/9, do not toggle the LANPHYPC value bit (essentially performing a hard power reset of the device) otherwise the PHY can be put into an unknown state. Cleanup whitespace in the same function. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
The link can be unexpectedly dropped when the timer for entering EEE low- power-idle quiet state expires too soon. The timer needs to be extended from 196usec to 200usec after every LCD (PHY) reset to prevent this from happening. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
With some PHYs supported by this driver, link establishment can take a little longer when connected to certain switches. Extend the timeout to reduce the number of false diagnostic failures, and cleanup a code style issue in the same function. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Based on a report and patch originally submitted by Prasanna Panchamukhi. Use dev_kfree_skb_irq() in e1000_clean_jumbo_rx_irq() since this latter function is called only in interrupt context. This avoids "Warning: kfree_skb on hard IRQ" messages. Cc: "Prasanna S. Panchamukhi" <prasanna.panchamukhi@riverbed.com> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lior Levy 提交于
Removed Tx hang detection mechanism from ixgbevf. This mechanism has no affect and can cause false alarm messages in some cases. Especially when VF Tx rate limit is turned on. The same mechanism was removed recently from igbvf. Signed-off-by: NLior Levy <lior.levy@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yi Zou 提交于
Add proper documentation for previously added net_device_ops ops for FCoE. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Based on a patch from Jesse Gross <jesse@nicira.com> This switches the ixgb driver to use the new VLAN interfaces. In doing this, it completes the work begun in ae54496f allowing the use of hardware VLAN insertion without having a VLAN group configured. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David S. Miller 提交于
Completely unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
fl->oif will always be zero on the input path, so there is no reason to test for that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
All callers are under rcu_read_lock() protection already. Rename to ip_check_mc_rcu() to make it even more clear. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
-
由 stephen hemminger 提交于
Add necessary alias to autoload ip6ip6 tunnel module. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Randy Dunlap 提交于
When configs BRIDGE=y and IPV6=m, this build error occurs: br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr' BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding depends on IPV6 || IPV6=n to BRIDGE_IGMP_SNOOPING would be a good fix. As it is currently, making BRIDGE depend on the IPV6 config works. Reported-by: NPatrick Schaaf <netdev@bof.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] mantis_pci: remove asm/pgtable.h include [media] tda829x: fix regression in probe functions [media] mceusb: don't claim multifunction device non-IR parts [media] nuvoton-cir: fix wake from suspend [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411 [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang [media] cx25840: fix probing of cx2583x chips [media] cx23885: Remove unused 'err:' labels to quiet compiler warning [media] cx23885: Revert "Check for slave nack on all transactions" [media] DiB7000M: add pid filtering [media] Fix sysfs rc protocol lookup for rc-5-sz [media] au0828: fix VBI handling when in V4L2 streaming mode [media] ir-raw: Properly initialize the IR event (BZ#27202) [media] s2255drv: firmware re-loading changes [media] Fix double free of video_device in mem2mem_testdev [media] DM04/QQBOX memcpy to const char fix
-
由 Doe, YiCheng 提交于
This patch fixes an issue in OpenIPMI module where sometimes an ABORT command is sent after sending an IPMI request to BMC causing the IPMI request to fail. Signed-off-by: NYiCheng Doe <yicheng.doe@hp.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Acked-by: NTom Mingarelli <thomas.mingarelli@hp.com> Tested-by: NAndy Cress <andy.cress@us.kontron.com> Tested-by: NMika Lansirine <Mika.Lansirinne@stonesoft.com> Tested-by: NBrian De Wolf <bldewolf@csupomona.edu> Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com> Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk> Acked-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs/dcache: allow d_obtain_alias() to return unhashed dentries Check for immutable/append flag in fallocate path sysctl: the include of rcupdate.h is only needed in the kernel fat: fix d_revalidate oopsen on NFS exports jfs: fix d_revalidate oopsen on NFS exports ocfs2: fix d_revalidate oopsen on NFS exports gfs2: fix d_revalidate oopsen on NFS exports fuse: fix d_revalidate oopsen on NFS exports ceph: fix d_revalidate oopsen on NFS exports reiserfs xattr ->d_revalidate() shouldn't care about RCU /proc/self is never going to be invalidated...
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Initialize the broadcast assist unit base destination node id properly x86, numa: Fix numa_emulation code with memory-less node0 x86, build: Make sure mkpiggy fails on read error
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix sched rt group scheduling when hierachy is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache perf symbols: Fix vmlinux path when not using --symfs
-
由 Takashi Iwai 提交于
This reverts commit 951f3512 drm/i915: Do not handle backlight combination mode specially since this commit introduced other regressions due to untouched LBPC register, e.g. the backlight dimmed after resume. In addition to the revert, this patch includes a fix for the original issue (weird backlight levels) by removing the wrong bit shift for computing the current backlight level. Also, including typo fixes (lpbc -> lbpc). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524Acked-by: NIndan Zupancic <indan@nul.nu> Reviewed-by: NKeith Packard <keithp@keithp.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 3月, 2011 11 次提交
-
-
由 J. Bruce Fields 提交于
Without this patch, inodes are not promptly freed on last close of an unlinked file by an nfs client: client$ mount -tnfs4 server:/export/ /mnt/ client$ tail -f /mnt/FOO ... server$ df -i /export server$ rm /export/FOO (^C the tail -f) server$ df -i /export server$ echo 2 >/proc/sys/vm/drop_caches server$ df -i /export the df's will show that the inode is not freed on the filesystem until the last step, when it could have been freed after killing the client's tail -f. On-disk data won't be deallocated either, leading to possible spurious ENOSPC. This occurs because when the client does the close, it arrives in a compound with a putfh and a close, processed like: - putfh: look up the filehandle. The only alias found for the inode will be DCACHE_UNHASHED alias referenced by the filp this, so it creates a new DCACHE_DISCONECTED dentry and returns that instead. - close: closes the existing filp, which is destroyed immediately by dput() since it's DCACHE_UNHASHED. - end of the compound: release the reference to the current filehandle, and dput() the new DCACHE_DISCONECTED dentry, which gets put on the unused list instead of being destroyed immediately. Nick Piggin suggested fixing this by allowing d_obtain_alias to return the unhashed dentry that is referenced by the filp, instead of making it create a new dentry. Leave __d_find_alias() alone to avoid changing behavior of other callers. Also nfsd doesn't need all the checks of __d_find_alias(); any dentry, hashed or unhashed, disconnected or not, should work. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matt Carlson 提交于
The 5750 ASIC rev was never released as a PCI device. It only exists as a PCIe device. This patch removes the code that supports the former configuration. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch moves the function that initializes the link configuration closer to the place where the rest of the phy code is initialized. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
In the near future, the VAux switching decision process is going to get more complicated. This patch refines and consolidates the existing algorithm in anticipation of the new scheme. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 895950c2, entitled "tg3: Use DEFINE_PCI_DEVICE_TABLE" moved two pci device tables into the global address space, but didn't declare them static and didn't prefix them with "tg3_". This patch fixes those problems. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds code to verify the checksum stored in the "RV" info keyword of the RODATA VPD section. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The tg3 NVRAM selftest actually fails when validating the checksum of the legacy NVRAM format. However, the test still reported success because the last update of the return code was a success from the NVRAM reads. This patch fixes the code so that the error return code defaults to a failure status. Then the patch fixes the reason why the checsum validation failed. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 2866d956, entitled "tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all revisions of the chip. There was a change that should have been a part of that patch that was missed. This patch adds the missing piece. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marco Stornelli 提交于
In the fallocate path the kernel doesn't check for the immutable/append flag. It's possible to have a race condition in this scenario: an application open a file in read/write and it does something, meanwhile root set the immutable flag on the file, the application at that point can call fallocate with success. In addition, we don't allow to do any unreserve operation on an append only file but only the reserve one. Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Stephen Rothwell 提交于
Fixes this built error: include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
can't blindly check nd->flags in ->d_revalidate() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-