- 11 3月, 2014 4 次提交
-
-
由 Eric Dumazet 提交于
All skb in socket write queue should be properly timestamped. In case of FastOpen, we special case the SYN+DATA 'message' as we queue in socket wrote queue the two fallback skbs: 1) SYN message by itself. 2) DATA segment by itself. We should make sure these skbs have proper timestamps. Add a WARN_ON_ONCE() to eventually catch future violations. Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
Correct offset is 3 of the 6lowpanfrag_max_datagram_size value in proc entry ctl table and not 2. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
net/l2tp/l2tp_core.c:1111:15: warning: unused variable 'sk' [-Wunused-variable] Fixes: 31c70d59 ("l2tp: keep original skb ownership") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
One known problem with netlink is the fact that NLMSG_GOODSIZE is really small on PAGE_SIZE==4096 architectures, and it is difficult to know in advance what buffer size is used by the application. This patch adds an automatic learning of the size. First netlink message will still be limited to ~4K, but if user used bigger buffers, then following messages will be able to use up to 16KB. This speedups dump() operations by a large factor and should be safe for legacy applications. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Thomas Graf <tgraf@suug.ch> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2014 2 次提交
-
-
由 dingtianhong 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array, so it is safe to use it for vlan, and make sense for fast path. Cc: Joe Perches <joe@perches.com> Cc: Patrick McHardy <kaber@trash.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
According Joe's suggestion, maybe it'd be faster to add an unlikely to the test for PCKET_OTHERHOST, so I add it and see whether the performance could be better, although the differences is so small and negligible, but it is hard to catch that any lower device would set the skb type to PACKET_OTHERHOST, so most of time, I think it make sense to add unlikely for the test. Cc: Joe Perches <joe@perches.com> Cc: Patrick McHardy <kaber@trash.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Resizing fq hash table allocates memory while holding qdisc spinlock, with BH disabled. This is definitely not good, as allocation might sleep. We can drop the lock and get it when needed, we hold RTNL so no other changes can happen at the same time. Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2014 3 次提交
-
-
由 Alexander Aring 提交于
This patch adds a missing return after fragmentation init. Otherwise we register a sysctl interface and deregister it afterwards which makes no sense. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
There is no reason to orphan skb in l2tp. This breaks things like per socket memory limits, TCP Small queues... Fix this before more people copy/paste it. This is very similar to commit 8f646c92 ("vxlan: keep original skb ownership") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Usage of skb->tstamp should remain private to TCP stack (only set on packets on write queue, not on cloned ones) Otherwise, packets given to loopback interface with a non null tstamp can confuse netif_rx() / net_timestamp_check() Other possibility would be to clear tstamp in loopback_xmit(), as done in skb_scrub_packet() Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2014 5 次提交
-
-
由 Eric Dumazet 提交于
htb_dump() and htb_dump_class() do not strictly need to acquire qdisc lock to fetch qdisc and/or class parameters. We hold RTNL and no changes can occur. This reduces by 50% qdisc lock pressure while doing tc qdisc|class dump operations. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This header is used by bluetooth and ieee802154 branch. This patch move this header to the include/net directory to avoid a use of a relative path in include. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
The 6lowpan.h file contains some static inline function which use internal ipv6 api structs. Add a include of ipv6.h to be sure that it's known before. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Can be invoked from non-BH context. Based upon a patch by Eric Dumazet. Fixes: f19c29e3 ("tcp: snmp stats for Fast Open, SYN rtx, and data pkts") Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Commit e688a604 ("net: introduce DST_NOPEER dst flag") introduced DST_NOPEER because because of crashes in ipv6_select_ident called from udp6_ufo_fragment. Since commit 916e4cf4 ("ipv6: reuse ip6_frag_id from ip6_ufo_append_data") we don't call ipv6_select_ident any more from ip6_ufo_append_data, thus this flag lost its purpose and can be removed. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2014 2 次提交
-
-
由 Alexander Aring 提交于
This patch fixes some whitespace issues in Kconfig files of IEEE 802.15.4 subsytem. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Wunderlich 提交于
MPLS labels may contain traffic control information, which should be evaluated and used by the wireless subsystem if present. Also check for IEEE 802.21 which is always network control traffic. Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2014 7 次提交
-
-
由 Tim Smith 提交于
Keep track of rxrpc_call structures in a hashtable so they can be found directly from the network parameters which define the call. This allows incoming packets to be routed directly to a call without walking through hierarchy of peer -> transport -> connection -> call and all the spinlocks that that entailed. Signed-off-by: NTim Smith <tim@electronghost.co.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Daniel Borkmann 提交于
RFC4895 introduced AUTH chunks for SCTP; during the SCTP handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS being optional though): ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- A special case is when an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- RFC4895, section 6.3. Receiving Authenticated Chunks says: The receiver MUST use the HMAC algorithm indicated in the HMAC Identifier field. If this algorithm was not specified by the receiver in the HMAC-ALGO parameter in the INIT or INIT-ACK chunk during association setup, the AUTH chunk and all the chunks after it MUST be discarded and an ERROR chunk SHOULD be sent with the error cause defined in Section 4.1. [...] If no endpoint pair shared key has been configured for that Shared Key Identifier, all authenticated chunks MUST be silently discarded. [...] When an endpoint requires COOKIE-ECHO chunks to be authenticated, some special procedures have to be followed because the reception of a COOKIE-ECHO chunk might result in the creation of an SCTP association. If a packet arrives containing an AUTH chunk as a first chunk, a COOKIE-ECHO chunk as the second chunk, and possibly more chunks after them, and the receiver does not have an STCB for that packet, then authentication is based on the contents of the COOKIE-ECHO chunk. In this situation, the receiver MUST authenticate the chunks in the packet by using the RANDOM parameters, CHUNKS parameters and HMAC_ALGO parameters obtained from the COOKIE-ECHO chunk, and possibly a local shared secret as inputs to the authentication procedure specified in Section 6.3. If authentication fails, then the packet is discarded. If the authentication is successful, the COOKIE-ECHO and all the chunks after the COOKIE-ECHO MUST be processed. If the receiver has an STCB, it MUST process the AUTH chunk as described above using the STCB from the existing association to authenticate the COOKIE-ECHO chunk and all the chunks after it. [...] Commit bbd0d598 introduced the possibility to receive and verification of AUTH chunk, including the edge case for authenticated COOKIE-ECHO. On reception of COOKIE-ECHO, the function sctp_sf_do_5_1D_ce() handles processing, unpacks and creates a new association if it passed sanity checks and also tests for authentication chunks being present. After a new association has been processed, it invokes sctp_process_init() on the new association and walks through the parameter list it received from the INIT chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO and SCTP_PARAM_CHUNKS, and copies them into asoc->peer meta data (peer_random, peer_hmacs, peer_chunks) in case sysctl -w net.sctp.auth_enable=1 is set. If in INIT's SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set, peer_random != NULL and peer_hmacs != NULL the peer is to be assumed asoc->peer.auth_capable=1, in any other case asoc->peer.auth_capable=0. Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is available, we set up a fake auth chunk and pass that on to sctp_sf_authenticate(), which at latest in sctp_auth_calculate_hmac() reliably dereferences a NULL pointer at position 0..0008 when setting up the crypto key in crypto_hash_setkey() by using asoc->asoc_shared_key that is NULL as condition key_id == asoc->active_key_id is true if the AUTH chunk was injected correctly from remote. This happens no matter what net.sctp.auth_enable sysctl says. The fix is to check for net->sctp.auth_enable and for asoc->peer.auth_capable before doing any operations like sctp_sf_authenticate() as no key is activated in sctp_auth_asoc_init_active_key() for each case. Now as RFC4895 section 6.3 states that if the used HMAC-ALGO passed from the INIT chunk was not used in the AUTH chunk, we SHOULD send an error; however in this case it would be better to just silently discard such a maliciously prepared handshake as we didn't even receive a parameter at all. Also, as our endpoint has no shared key configured, section 6.3 says that MUST silently discard, which we are doing from now onwards. Before calling sctp_sf_pdiscard(), we need not only to free the association, but also the chunk->auth_chunk skb, as commit bbd0d598 created a skb clone in that case. I have tested this locally by using netfilter's nfqueue and re-injecting packets into the local stack after maliciously modifying the INIT chunk (removing RANDOM; HMAC-ALGO param) and the SCTP packet containing the COOKIE_ECHO (injecting AUTH chunk before COOKIE_ECHO). Fixed with this patch applied. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Add the following snmp stats: TCPFastOpenActiveFail: Fast Open attempts (SYN/data) failed beacuse the remote does not accept it or the attempts timed out. TCPSynRetrans: number of SYN and SYN/ACK retransmits to break down retransmissions into SYN, fast-retransmits, timeout retransmits, etc. TCPOrigDataSent: number of outgoing packets with original data (excluding retransmission but including data-in-SYN). This counter is different from TcpOutSegs because TcpOutSegs also tracks pure ACKs. TCPOrigDataSent is more useful to track the TCP retransmission rate. Change TCPFastOpenActive to track only successful Fast Opens to be symmetric to TCPFastOpenPassive. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNandita Dukkipati <nanditad@google.com> Signed-off-by: NLawrence Brakmo <brakmo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
when ip_tunnel process multicast packets, it may check if the packet is looped back packet though 'rt_is_output_route(skb_rtable(skb))' in ip_tunnel_rcv(), but before that , skb->_skb_refdst has been dropped in iptunnel_pull_header(), so which leads to a panic. fix the bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hiroaki SHIMODA 提交于
On x86_64 we have 3 holes in struct tbf_sched_data. The member peak_present can be replaced with peak.rate_bytes_ps, because peak.rate_bytes_ps is set only when peak is specified in tbf_change(). tbf_peak_present() is introduced to test peak.rate_bytes_ps. The member max_size is moved to fill 32bit hole. Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
RTT may be bogus with tall loss probe (TLP) when a packet is retransmitted and latter (s)acked without TCPCB_SACKED_RETRANS flag. For example, TLP calls __tcp_retransmit_skb() instead of tcp_retransmit_skb(). The skb timestamps are updated but the sacked flag is not marked with TCPCB_SACKED_RETRANS. As a result we'll get bogus RTT in tcp_clean_rtx_queue() or in tcp_sacktag_one() on spurious retransmission. The fix is to apply the sticky flag TCP_EVER_RETRANS to enforce Karn's check on RTT sampling. However this will disable F-RTO if timeout occurs after TLP, by resetting undo_marker in tcp_enter_loss(). We relax this check to only if any pending retransmists are still in-flight. Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NNandita Dukkipati <nanditad@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This is a sanity check and we never pass invalid values so this patch doesn't change anything. However the node->time_in[] array has HSR_MAX_SLAVE (2) elements and not HSR_MAX_DEV (3). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2014 4 次提交
-
-
由 Oliver Hartkopp 提交于
In commit e2d265d3 (canfd: add support for CAN FD in CAN_RAW sockets) CAN FD frames with a payload length up to 8 byte are passed to legacy sockets where the CAN FD support was not enabled by the application. After some discussions with developers at a fair this well meant feature leads to confusion as no clean switch for CAN / CAN FD is provided to the application programmer. Additionally a compatibility like this for legacy CAN_RAW sockets requires some compatibility handling for the sending, e.g. make CAN2.0 frames a CAN FD frame with BRS at transmission time (?!?). This will become a mess when people start to develop applications with real CAN FD hardware. This patch reverts the bad compatibility code together with the documentation describing the removed feature. Acked-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Alexander Aring 提交于
Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
The initialization of the tag value doesn't matter at begin of fragmentation. This patch removes the initialization to zero. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
Datagram size value is u16 because we convert it to host byte order and we need to read it. Only the tag value belongs to __be16 type. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2014 7 次提交
-
-
由 Alexander Aring 提交于
This patch drops the current way of 6lowpan fragmentation on receiving side and replace it with a implementation which use the inet_frag api. The old fragmentation handling has some race conditions and isn't rfc4944 compatible. Also adding support to match fragments on destination address, source address, tag value and datagram_size which is missing in the current implementation. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
Detected with: ./scripts/checkpatch.pl --strict -f net/ieee802154/6lowpan_rtnl.c Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
We have a 6lowpan.c file and 6lowpan.ko file. To avoid confusing we should move 6lowpan.c to 6lowpan_rtnl.c. Then we can support multiple source files for 6lowpan module. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch fix the fragmentation on sending side according to rfc4944. Also add improvement to use the full payload of a PDU which calculate the nearest divided to 8 payload length for the fragmentation datagram size attribute. The main issue is that the datagram size of fragmentation header use the ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive network header size (and transport header size if compressed). Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch add a lookup function for uncompressed 6LoWPAN header size. This is needed to estimate the real size after uncompress the 6LoWPAN header. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Commit 57f89bfa ("network: Allow af_packet to transmit +4 bytes for VLAN packets.") added the possibility for non-mmaped frames to send extra 4 byte for VLAN header so the MTU increases from 1500 to 1504 byte, for example. Commit cbd89acb ("af_packet: fix for sending VLAN frames via packet_mmap") attempted to fix that for the mmap part but was reverted as it caused regressions while using eth_type_trans() on output path. Lets just act analogous to 57f89bfa and add a similar logic to TX_RING. We presume size_max as overcharged with +4 bytes and later on after skb has been built by tpacket_fill_skb() check for ETH_P_8021Q header on packets larger than normal MTU. Can be easily reproduced with a slightly modified trafgen in mmap(2) mode, test cases: { fill(0xff, 12) const16(0x8100) fill(0xff, <1504|1505>) } { fill(0xff, 12) const16(0x0806) fill(0xff, <1500|1501>) } Note that we need to do the test right after tpacket_fill_skb() as sockets can have PACKET_LOSS set where we would not fail but instead just continue to traverse the ring. Reported-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Phil Sutter <phil@nwl.cc> Tested-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2014 5 次提交
-
-
由 Hans Schillstrom 提交于
The commit 9195bb8e ("ipv6: improve ipv6_find_hdr() to skip empty routing headers") broke ipv6_find_hdr(). When a target is specified like IPPROTO_ICMPV6 ipv6_find_hdr() returns -ENOENT when it's found, not the header as expected. A part of IPVS is broken and possible also nft_exthdr_eval(). When target is -1 which it is most cases, it works. This patch exits the do while loop if the specific header is found so the nexthdr could be returned as expected. Reported-by: NArt -kwaak- van Breemen <ard@telegraafnet.nl> Signed-off-by: NHans Schillstrom <hans@schillstrom.com> CC:Ansis Atteka <aatteka@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
If the neigh table's entries is less than gc_thresh1, the function will return directly, and the reachabletime will not be recompute, so the reachabletime can be guessed. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
Because those following if conditions will not be matched. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Colitti 提交于
Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
When a VHT network uses 20 or 40 MHz as per the HT operation information, the channel center frequency segment 0 field in the VHT operation information is reserved, so ignore it. This fixes association with such networks when the AP puts 0 into the field, previously we'd disconnect due to an invalid channel with the message wlan0: AP VHT information is invalid, disable VHT Cc: stable@vger.kernel.org Fixes: f2d9d270 ("mac80211: support VHT association") Reported-by: NTim Nelson <tim.l.nelson@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-