- 27 5月, 2011 5 次提交
-
-
由 Paul E. McKenney 提交于
The old version of rcu_enter_nohz() forced RCU into nohz mode even if the nesting count was non-zero. This change causes rcu_enter_nohz() to hold off for non-zero nesting counts. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Condition the set_need_resched() in rcu_irq_exit() on in_irq(). This should be a no-op, because rcu_irq_exit() should only be called from irq. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Second step of partitioning of commit e59fb312. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Add the memory barriers added by e59fb312. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Frederic Weisbecker 提交于
HARDIRQ_ENTER() maps to irq_enter() which calls rcu_irq_enter(). But HARDIRQ_EXIT() maps to __irq_exit() which doesn't call rcu_irq_exit(). So for every locking selftest that simulates hardirq disabled, we create an imbalance in the rcu extended quiescent state internal state. As a result, after the first missing rcu_irq_exit(), subsequent irqs won't exit dyntick-idle mode after leaving the interrupt handler. This means that RCU won't see the affected CPU as being in an extended quiescent state, resulting in long grace-period delays (as in grace periods extending for hours). To fix this, just use __irq_enter() to simulate the hardirq context. This is sufficient for the locking selftests as we don't need to exit any extended quiescent state or perform any check that irqs normally do when they wake up from idle. As a side effect, this patch makes it possible to restore "rcu: Decrease memory-barrier usage based on semi-formal proof", which eventually helped finding this bug. Reported-and-tested-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stable <stable@kernel.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
- 20 5月, 2011 1 次提交
-
-
由 Paul E. McKenney 提交于
This reverts commit e59fb312. This reversion was due to (extreme) boot-time slowdowns on SPARC seen by Yinghai Lu and on x86 by Ingo . This is a non-trivial reversion due to intervening commits. Conflicts: Documentation/RCU/trace.txt kernel/rcutree.c Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 5月, 2011 34 次提交
-
-
由 Paul E. McKenney 提交于
The RCU callback prl_entry_destroy_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Paul E. McKenney 提交于
The RCU callback softif_neigh_free_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NSven Eckelmann <sven@narfation.org>
-
由 Paul E. McKenney 提交于
The RCU callback neigh_node_free_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NSven Eckelmann <sven@narfation.org>
-
由 Paul E. McKenney 提交于
The RCU callback gw_node_free_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NSven Eckelmann <sven@narfation.org>
-
由 Lai Jiangshan 提交于
The rcu callback kfree_tid_tx() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(kfree_tid_tx). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: N"David S. Miller" <davem@davemloft.net>
-
由 Lai Jiangshan 提交于
The rcu callback xt_osf_finger_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(xt_osf_finger_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback work_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(work_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: N"John W. Linville" <linville@tuxdriver.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback wq_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(wq_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback phonet_device_rcu_free() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(phonet_device_rcu_free). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback swevent_hlist_release_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(swevent_hlist_release_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback free_ctx() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(free_ctx). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback __nf_ct_ext_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(__nf_ct_ext_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback net_generic_release() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(net_generic_release). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback netlbl_unlhsh_free_addr6() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(netlbl_unlhsh_free_addr6). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback netlbl_unlhsh_free_addr4() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(netlbl_unlhsh_free_addr4). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback sel_netif_free() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(sel_netif_free). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback xps_dev_maps_release() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(xps_dev_maps_release). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback xps_map_release() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(xps_map_release). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback rps_map_release() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(rps_map_release). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ipv6_mc_socklist_reclaim() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ipv6_mc_socklist_reclaim). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback macvlan_port_rcu_free() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(macvlan_port_rcu_free). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ring_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ring_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback free_dm_hw_stat() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(free_dm_hw_stat). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ip_mc_socklist_reclaim() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ip_mc_socklist_reclaim). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ip_sf_socklist_reclaim() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ip_sf_socklist_reclaim). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ip_mc_list_reclaim() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ip_mc_list_reclaim). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback __gen_kill_estimator() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(__gen_kill_estimator). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback __leaf_info_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(__leaf_info_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback fc_rport_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(fc_rport_free_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback user_update_rcu_disposal() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(user_update_rcu_disposal). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
There is no callback of this module maybe queued since we use kfree_rcu(), we can safely remove the rcu_barrier(). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback dn_dev_free_ifa_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(dn_dev_free_ifa_rcu). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback ha_rcu_free() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ha_rcu_free). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Lai Jiangshan 提交于
The rcu callback sctp_local_addr_free() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(sctp_local_addr_free). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-