This patch changes flow hashing to use jhash2 over the flow_keys
structure instead just doing jhash_3words over src, dst, and ports.
This method will allow us take more input into the hashing function
so that we can include full IPv6 addresses, VLAN, flow labels etc.
without needing to resort to xor'ing which makes for a poor hash.
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add uapi define for MPLS over IP.
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow eBPF programs attached to classifier/actions to call
bpf_clone_redirect(skb, ifindex, flags) helper which will
mirror or redirect the packet by dynamic ifindex selection
from within the program to a target device either at ingress
or at egress. Can be used for various scenarios, for example,
to load balance skbs into veths, split parts of the traffic
to local taps, etc.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the TI dp83867 Gigabit ethernet phy
device.

The DP83867 is a robust, low power, fully featured
Physical Layer transceiver with integrated PMD
sublayers to support 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet protocols.
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently packets with non-hardware-accelerated vlan cannot be handled
by GRO. This causes low performance for 802.1ad and stacked vlan, as their
vlan tags are currently not stripped by hardware.

This patch adds GRO support for non-hardware-accelerated vlan and
improves receive performance of them.

Test Environment:
 vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599)

Result:

- Before

$ netperf -t TCP_STREAM -H 192.168.20.2 -l 60
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    60.00    5233.17

Rx side CPU usage:
  %usr      %sys      %irq     %soft     %idle
  0.27     58.03      0.00     41.70      0.00

- After

$ netperf -t TCP_STREAM -H 192.168.20.2 -l 60
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    60.00    7586.85

Rx side CPU usage:
  %usr      %sys      %irq     %soft     %idle
  0.50     25.83      0.00     59.53     14.14

[ Register VLAN offloads with priority 10 -DaveM ]
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If new optional attribute OVS_USERSPACE_ATTR_ACTIONS is added to an
OVS_ACTION_ATTR_USERSPACE action, then include the datapath actions
in the upcall.

This Directly associates the sampled packet with the path it takes
through the virtual switch. Path information currently includes mangling,
encapsulation and decapsulation actions for tunneling protocols GRE,
VXLAN, Geneve, MPLS and QinQ, but this extension requires no further
changes to accommodate datapath actions that may be added in the
future.

Adding path information enhances visibility into complex virtual
networks.
Signed-off-by: NNeil McKee <neil.mckee@inmon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we scan a packet for GRO processing, we want to see the most
common packet types in the front of the offload_base list.

So add a priority field so we can handle this properly.

IPv4/IPv6 get the highest priority with the implicit zero priority
field.

Next comes ethernet with a priority of 10, and then we have the MPLS
types with a priority of 15.
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Suggested-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes userspace compilation error:

error: unknown type name ‘__virtio16’
  __virtio16 tag;
Signed-off-by: NMikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Linux 3.17 and earlier are explicitly engineered so that if the app
doesn't specifically request a CC module on a listener before the SYN
arrives, then the child gets the system default CC when the connection
is established. See tcp_init_congestion_control() in 3.17 or earlier,
which says "if no choice made yet assign the current value set as
default". The change ("net: tcp: assign tcp cong_ops when tcp sk is
created") altered these semantics, so that children got their parent
listener's congestion control even if the system default had changed
after the listener was created.

This commit returns to those original semantics from 3.17 and earlier,
since they are the original semantics from 2007 in 4d4d3d1e ("[TCP]:
Congestion control initialization."), and some Linux congestion
control workflows depend on that.

In summary, if a listener socket specifically sets TCP_CONGESTION to
"x", or the route locks the CC module to "x", then the child gets
"x". Otherwise the child gets current system default from
net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and
earlier, and this commit restores that.

Fixes: 55d8694f ("net: tcp: assign tcp cong_ops when tcp sk is created")
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

User space applications that desire to explicitly select the
underlying transport for a PF_RDS socket may do so by using the
SO_RDS_TRANSPORT socket option at the SOL_RDS level before bind().
The integer argument provided to the socket option would be one
of the RDS_TRANS_* values, e.g., RDS_TRANS_TCP. This commit exports
the constant values need by such applications via <linux/rds.h>
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As this is already exported from tracing side via commit d9847d31
("tracing: Allow BPF programs to call bpf_ktime_get_ns()"), we might
as well want to move it to the core, so also networking users can make
use of it, e.g. to measure diffs for certain flows from ingress/egress.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Normally the program attachment place (like sockets, qdiscs) takes
care of rcu protection and calls bpf_prog_put() after a grace period.
The programs stored inside prog_array may not be attached anywhere,
so prog_array needs to take care of preserving rcu protection.
Otherwise bpf_tail_call() will race with bpf_prog_put().
To solve that introduce bpf_prog_put_rcu() helper function and use
it in 3 places where unattached program can decrement refcnt:
closing program fd, deleting/replacing program in prog_array.

Fixes: 04fd61ab ("bpf: allow bpf programs to tail-call other bpf programs")
Reported-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, mlx4_en allocated EQs and used them exclusively.
This affected RoCE performance, as applications which are
events sensitive were limited to use only the legacy EQs.

Change that by introducing an EQ pool. This pool is managed
by mlx4_core. EQs are assigned to ports (when there are limited
number of EQs, multiple ports could be assigned to the same EQs).

An exception to this rule is the ASYNC EQ which handles various events.

Legacy EQs are completely removed as all EQs could be shared.

When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for
EQ serving on a specific port. The core driver calculates which
EQ should be assigned to that request.

Because IRQs are shared between IB and Ethernet modules, their
names only include the PCI device BDF address.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems like we only care if a transport is passthrough or not. Convert
transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a
flag, TRANSPORT_FLAG_PASSTHROUGH.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This is the Ethernet part of the driver for the Mellanox ConnectX(R)-4
Single/Dual-Port Adapter supporting 100Gb/s with VPI.  The driver
extends the existing mlx5 driver with Ethernet functionality.

This patch contains the driver entry points but does not include
transmit and receive (see the previous patch in the series) routines.

It also adds the option MLX5_CORE_EN to Kconfig to enable/disable the
Ethernet functionality. Currently, Kconfig is programmed to make
Ethernet and Infiniband functionality mutally exclusive.
Also changed MLX5_INFINIBAND to be depandant on MLX5_CORE instead of
selecting it, since MLX5_CORE could be selected without MLX5_INFINIBAND
being selected.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch contains the resource handling files:
- flow_table.c: This file contains the code to handle the low level API
		to configure hardware flow table. It is separated from
		the flow_table_en.c, because it will be used in the
		future by Raw Ethernet QP in mlx5_ib too.
- en_flow_table.[ch]: Ethernet flow steering handling. The flow table
		object contain a mapping between flow specs and TIRs.
		This mechanism will be used also to configure e-switch
		in the future, when SR-IOV support will be added.
- transobj.[ch] - Low level functions to create/modify/destroy the
                  transport objects: RQ/SQ/TIR/TIS
- vport.[ch] - Handle attributes of a virtual port (vPort) in the
  embedded switch. Currently this switch is a passthrough, until SR-IOV
  support will be added.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce set/Query low level functions to access MTU in hardware. To be
used by the netdev.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce mlx5_core_modify_cq_moderation() to be used by the netdev, to
set hardware coalescing.
Signed-off-by: NRana Shahout <ranas@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implemet get/set port status low level functions to be exposed by the
netdev.
Signed-off-by: NRana Shahout <ranas@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Those registers will be used by the ethtool to set/get settings.
Signed-off-by: NRana Shahout <ranas@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Query all supported types of dev caps on driver load.
- Store the Cap data outbox per cap type into driver private data.
- Introduce new Macros to access/dump stored caps (using the auto
  generated data types).
- Obsolete SW representation of dev caps (no need for SW copy for each
  cap).
- Modify IB driver to use new macros for checking caps.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx5_ifc.h was heavily modified here since it is now generated by a
script from the device specification (PRM rev 0.25). This specification
is backward compatible to existing hardware.

Some structures/fields were added here in order to enable the Ethernet
functionality of the driver.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Preparation for upcoming ethernet driver.
- Move msix array from eq_table struct to priv since its not related to
  eq_table
- Intorduce irq_info struct to hold all irq information
- Move name from mlx5_eq to irq_info struct since it is irq property.
- Set IRQ affinity hints
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NRana Shahout <ranas@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As David Daney pointed in mlx4_core driver [1], mlx5_core is also
misusing the DMA-API.

This patch is removing the code that vmap() memory allocated by
dma_alloc_coherent().

After this patch, users of this drivers might fail allocating resources
on memory fragmeneted systems.  This will be fixed later on.

[1] - https://patchwork.ozlabs.org/patch/458531/

CC: David Daney <david.daney@cavium.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.

This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.

(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fixes "vlaue" for "value" in include/linux/if_vlan.h.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

classic BPF already exposes skb->dev->ifindex via SKF_AD_IFINDEX extension.
Allow eBPF program to access it as well. Note that classic aborts execution
of the program if 'skb->dev == NULL' (which is inconvenient for program
writers), whereas eBPF returns zero in such case.
Also expose the 'skb_iif' field, since programs triggered by redirected
packet need to known the original interface index.
Summary:
__skb->ifindex         -> skb->dev->ifindex
__skb->ingress_ifindex -> skb->skb_iif
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On stmmac driver, PHY specification in device-tree was done using the
non-standard property "snps,phy-addr". Specifying a PHY on a different
MDIO bus that the one within the stmmac controller doesn't seem to be
possible when device-tree is used.

This change adds support for the phy-handle property, as specified in
Documentation/devicetree/bindings/net/ethernet.txt.
Signed-off-by: NMathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the NSS/GMAC clocks and the TCM clock and NSS resets.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_pcpu_drain can be called on an offline cpu
in this scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     1 lock held by swapper/5/0:
      #0:  (&(&zone->lock)->rlock){..-...}, at: [<c0000000002073b0>] .free_pcppages_bulk+0x70/0x920

    stack backtrace:
     CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pcppages_bulk+0x60c/0x920
       .free_hot_cold_page+0x208/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_pcpu_drain trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_free can be called on an offline cpu in this
scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     no locks held by swapper/1/0.

    stack backtrace:
     CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pages_prepare+0x494/0x680
       .free_hot_cold_page+0x50/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION
where condition is cpu_online(smp_processor_id())
Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_kmem_cache_free can be called on an offline cpu in
this scenario caught by LOCKDEP:

    ===============================
    [ INFO: suspicious RCU usage. ]
    4.1.0-rc1+ #9 Not tainted
    -------------------------------
    include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
    no locks held by swapper/1/0.

    stack backtrace:
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
    Call Trace:
      .dump_stack+0x98/0xd4 (unreliable)
      .lockdep_rcu_suspicious+0x108/0x170
      .kmem_cache_free+0x344/0x4b0
      .__mmdrop+0x4c/0x160
      .idle_task_exit+0xf0/0x100
      .pnv_smp_cpu_kill_self+0x58/0x2c0
      .cpu_die+0x34/0x50
      .arch_cpu_idle_dead+0x20/0x40
      .cpu_startup_entry+0x708/0x7a0
      .start_secondary+0x36c/0x3a0
      start_secondary_prolog+0x10/0x14

Fix this by converting kmem_cache_free trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

XFS uses non-stanard batch sizes for avoiding frequent global
counter updates on it's allocated inode counters, as they increment
or decrement in batches of 64 inodes. Hence the standard percpu
counter batch of 32 means that the counter is effectively a global
counter. Currently Xfs uses a batch size of 128 so that it doesn't
take the global lock on every single modification.

However, Xfs also needs to compare accurately against zero, which
means we need to use percpu_counter_compare(), and that has a
hard-coded batch size of 32, and hence will spuriously fail to
detect when it is supposed to use precise comparisons and hence
the accounting goes wrong.

Add __percpu_counter_compare() to take a custom batch size so we can
use it sanely in XFS and factor percpu_counter_compare() to use it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDave Chinner <david@fromorbit.com>

A couple of enums in mac80211.h became structures recently, but the
comments didn't follow suit, leading to errors like:

  Error(.//include/net/mac80211.h:367): Cannot parse enum!
  Documentation/DocBook/Makefile:93: recipe for target 'Documentation/DocBook/80211.xml' failed
  make[1]: *** [Documentation/DocBook/80211.xml] Error 1
  Makefile:1361: recipe for target 'mandocs' failed
  make: *** [mandocs] Error 2

Fix the comments comments accordingly.  Added a couple of other small
comment fixes while I was there to silence other recently-added docbook
warnings.
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The ring_cookie is 64 bits wide which is much larger than can be used
for actual queue index values. So provide some helper routines to
pack a VF index into the cookie. This is useful to steer packets to
a VF ring without having to know the queue layout of the device.

CC: Alex Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

da91309e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function.  I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)

cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.

It can fail.  One of the two callers ignores this, the other aborts and
fails the device open.

It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes.  Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.

It contains a nonsensical test "!cpumask_of_node(numa_node)".  This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.

It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.

Fixes: da91309e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>

After commit 07f4c900 ("tcp/dccp: try to not exhaust
ip_local_port_range in connect()") it is advised to have an even number
of ports described in /proc/sys/net/ipv4/ip_local_port_range

This means start/end values should have a different parity.

Let's warn sysadmins of this, so that they can update their settings
if they want to.
Suggested-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>