Currently session draining only drains the fore channel.
The back channel processing must also be drained.

Use the back channel highest_slot_used to indicate that a callback is being
processed by the callback thread.  Move the session complete to be per channel.

When the session is draininig, wait for any current back channel processing
to complete and stop all new back channel processing by returning NFS4ERR_DELAY
to the back channel client.

Drain the back channel, then the fore channel.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Acked-by: NBruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fixes a bug where the nfs_client could be freed during callback processing.
Refactor nfs_find_client to use minorversion specific means to locate the
correct nfs_client structure.

In the NFS layer, V4.0 clients are found using the callback_ident field in the
CB_COMPOUND header.  V4.1 clients are found using the sessionID in the
CB_SEQUENCE operation which is also compared against the sessionID associated
with the back channel thread after a successful CREATE_SESSION.

Each of these methods finds the one an only nfs_client associated
with the incoming callback request - so nfs_find_client_next is not needed.

In the RPC layer, the pg_authenticate call needs to find the nfs_client. For
the v4.0 callback service, the callback identifier has not been decoded so a
search by address, version, and minorversion is used.  The sessionid for the
sessions based callback service has (usually) not been set for the
pg_authenticate on a CB_NULL call which can be sent prior to the return
of a CREATE_SESSION call, so the sessionid associated with the back channel
thread is not used to find the client in pg_authenticate for CB_NULL calls.

Pass the referenced nfs_client to each CB_COMPOUND operation being proceesed
via the new cb_process_state structure. The reference is held across
cb_compound processing.

Use the new cb_process_state struct to move the NFS4ERR_RETRY_UNCACHED_REP
processing from process_op into nfs4_callback_sequence where it belongs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sessions based callback service is started prior to the CREATE_SESSION call
so that it can handle CB_NULL requests which can be sent before the
CREATE_SESSION call returns and the session ID is known.

Set the callback sessionid after a sucessful CREATE_SESSION.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use the small id to pointer translator service to provide a unique callback
identifier per SETCLIENTID call used to identify the v4.0 callback service
associated with the clientid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Resetting the client minor version operations causes nfs4_destroy_callback
to fail to shutdown the NFSv4.1 callback service.

There is no reason to reset the client minorversion operations when the
nfs_client struct is being freed.

Remove the minorverion reset and rename the function.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The new back channel transport means we call the normal creation routine as
well as svc_xprt_put.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the current sock create and destroy routines into the new transport ops.
Back channel socket will be destroyed by the svc_closs_all call in svc_destroy.

Added check: only TCP supported on shared back channel.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Acked-by: NBruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The NFSv4.1 shared back channel does not need to call svc_drop because the
callback service never outlives the single connection it services, and it
reuses it's buffers and keeps the trasport.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Acked-by: NBruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch make nfsv4 use the generic xattr handling code
to get the nfsv4 acl. This will help us to add richacl
support to nfsv4 in later patches
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to skip VFS applying mode for NFS. So set MS_POSIXACL always
and selectively use umask. Ideally we would want to use umask only
when we don't have inheritable ACEs set. But NFS currently don't
allow to send umask to the server. So this is best what we can do
and this is consistent with NFSv3
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use ERR_CAST() intead of wierd-looking cast.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Trivial, but confusing when you're trying to grep through this
code....
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

On Tue, 2010-12-14 at 16:58 +0800, Mi Jinlong wrote:
> Hi,
>
> When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic
> at NFS client's __rpc_create_common function.
>
> The panic place is:
>   rpc_mkpipe
>     __rpc_lookup_create()          <=== find pipefile *idmap*
>     __rpc_mkpipe()                 <=== pipefile is *idmap*
>       __rpc_create_common()
>        ******  BUG_ON(!d_unhashed(dentry)); ******    *panic*
>
> It means that the dentry's d_flags have be set DCACHE_UNHASHED,
> but it should not be set here.
>
> Is someone known this bug? or give me some idea?
>
> A reproduce program is append, but it can't reproduce the bug every time.
> the export is: "/nfsroot       *(rw,no_root_squash,fsid=0,insecure)"
>
> And the panic message is append.
>
> ============================================================================
> #!/bin/sh
>
> LOOPTOTAL=768
> LOOPCOUNT=0
> ret=0
>
> while [ $LOOPCOUNT -ne $LOOPTOTAL ]
> do
> 	((LOOPCOUNT += 1))
> 	service nfs restart
> 	/usr/sbin/rpc.idmapd
> 	mount -t nfs4 127.0.0.1:/ /mnt|| return 1;
> 	ls -l /var/lib/nfs/rpc_pipefs/nfs/*/
> 	umount /mnt
> 	echo $LOOPCOUNT
> done
>
> ===============================================================================
> Code: af 60 01 00 00 89 fa 89 f0 e8 64 cf 89 f0 e8 5c 7c 64 cf 31 c0 8b 5c 24 10 8b
> 74 24 14 8b 7c 24 18 8b 6c 24 1c 83 c4 20 c3 <0f> 0b eb fc 8b 46 28 c7 44 24 08 20
> de ee f0 c7 44 24 04 56 ea
> EIP:[<f0ee92ea>] __rpc_create_common+0x8a/0xc0 [sunrpc] SS:ESP 0068:eccb5d28
> ---[ end trace 8f5606cd08928ed2]---
> Kernel panic - not syncing: Fatal exception
> Pid:7131, comm: mount.nfs4 Tainted: G     D   -------------------2.6.32 #1
> Call Trace:
>  [<c080ad18>] ? panic+0x42/0xed
>  [<c080e42c>] ? oops_end+0xbc/0xd0
>  [<c040b090>] ? do_invalid_op+0x0/0x90
>  [<c040b10f>] ? do_invalid_op+0x7f/0x90
>  [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc]
>  [<f0edc433>] ? rpc_free_task+0x33/0x70[sunrpc]
>  [<f0ed6508>] ? prc_call_sync+0x48/0x60[sunrpc]
>  [<f0ed656e>] ? rpc_ping+0x4e/0x60[sunrpc]
>  [<f0ed6eaf>] ? rpc_create+0x38f/0x4f0[sunrpc]
>  [<c080d80b>] ? error_code+0x73/0x78
>  [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc]
>  [<c0532bda>] ? d_lookup+0x2a/0x40
>  [<f0ee94b1>] ? rpc_mkpipe+0x111/0x1b0[sunrpc]
>  [<f10a59f4>] ? nfs_create_rpc_client+0xb4/0xf0[nfs]
>  [<f10d6c6d>] ? nfs_fscache_get_client_cookie+0x1d/0x50[nfs]
>  [<f10d3fcb>] ? nfs_idmap_new+0x7b/0x140[nfs]
>  [<c05e76aa>] ? strlcpy+0x3a/0x60
>  [<f10a60ca>] ? nfs4_set_client+0xea/0x2b0[nfs]
>  [<f10a6d0c>] ? nfs4_create_server+0xac/0x1b0[nfs]
>  [<c04f1400>] ? krealloc+0x40/0x50
>  [<f10b0e8b>] ? nfs4_remote_get_sb+0x6b/0x250[nfs]
>  [<c04f14ec>] ? kstrdup+0x3c/0x60
>  [<c0520739>] ? vfs_kern_mount+0x69/0x170
>  [<f10b1a3c>] ? nfs_do_root_mount+0x6c/0xa0[nfs]
>  [<f10b1b47>] ? nfs4_try_mount+0x37/0xa0[nfs]
>  [<f10afe6d>] ? nfs4_validate_text_mount_data+-x7d/0xf0[nfs]
>  [<f10b1c42>] ? nfs4_get_sb+0x92/0x2f0
>  [<c0520739>] ? vfs_kern_mount+0x69/0x170
>  [<c05366d2>] ? get_fs_type+0x32/0xb0
>  [<c052089f>] ? do_kern_mount+0x3f/0xe0
>  [<c053954f>] ? do_mount+0x2ef/0x740
>  [<c0537740>] ? copy_mount_options+0xb0/0x120
>  [<c0539a0e>] ? sys_mount+0x6e/0xa0

Hi,

Does the following patch fix the problem?

Cheers
  Trond

--------------------------
SUNRPC: Fix a BUG in __rpc_create_common

From: Trond Myklebust <Trond.Myklebust@netapp.com>

Mi Jinlong reports:

When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic
at NFS client's __rpc_create_common function.

The panic place is:
  rpc_mkpipe
      __rpc_lookup_create()          <=== find pipefile *idmap*
      __rpc_mkpipe()                 <=== pipefile is *idmap*
        __rpc_create_common()
         ******  BUG_ON(!d_unhashed(dentry)); ****** *panic*

The test is wrong: we can find ourselves with a hashed negative dentry here
if the idmapper tried to look up the file before we got round to creating
it.

Just replace the BUG_ON() with a d_drop(dentry).
Reported-by: NMi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We unlock again after we goto out.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Hi,

In fs/nfs/proc.c::nfs_proc_symlink() we will leak memory if either
nfs_alloc_fhandle() or nfs_alloc_fattr() returns NULL but the other one
doesn't.
This patch ensures memory allocated by one when the other fails is always
released (this is safe since nfs_free_fattr() and nfs_free_fhandle() both
call kfree which deals gracefully with NULL pointers).
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Update: added check for zero value as it was before (note: can't simply check
mountd_port for positive value because it's typeof unsigned short)

Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not
be changed during parsing mount options for mound data version 6. This default
value will be showed for mountport in /proc/mounts always since current default
check is for zero value. This small mistake leads to big problem, because
during umount.nfs execution from old user-space utils (at least nfs-utils
1.0.9) this value will be used as the server port to connect to. This request
will be rejected (since port is 65535) and thus nfs mount point can't be
unmounted.

Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if
/etc/mtab is a link to /proc/mounts.  Not all systems have this configuration.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note that cl_lease_time is in jiffies.  This can cause a very long wait
in the NFS4ERR_CLID_INUSE case.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Take advantage of kmem_cache_zalloc() in nfs_page_alloc(). Save a call to
memset() and a few bytes.

Before:
 [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o
    text    data     bss     dec     hex filename
    1765       0       8    1773     6ed fs/nfs/pagelist.o
After:
 [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o
    text    data     bss     dec     hex filename
    1749       0       8    1757     6dd fs/nfs/pagelist.o
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The contents of the src_sap field is not used in nlm_alloc_host().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

Remove the now unused helper nlm_lookup_host().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

nlm_hosts now contains only server-side entries.  Rename it to match
convention of client side cache.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

Change nlmsvc_lookup_host() to be purpose-built for server-side
nlm_host management.  This replaces the generic nlm_lookup_host()
helper function, just like on the client side.  The lookup logic is
specialized for server host lookups.

The server side cache also gets its own specialized equivalent of the
nlm_release_host() function.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFS clients don't need the garbage collection processing that is
performed on nlm_host structures.  The client picks up an nlm_host at
mount time and holds a reference to it until the file system is
unmounted.

Servers, on the other hand, don't have a precise way to tell when an
nlm_host is no longer being used, so zero refcount nlm_host entries
are left to expire in the cache after a time.

Basically there's nothing holding a reference to an nlm_host between
individual server-side NLM requests, but we can't afford the expense
of recreating them for every new NLM request from a client.  The
nlm_host cache adds some lifetime hysteresis to entries in the cache
so the next time a particular nlm_host is needed, it's likely to be
discovered by a lookup rather than created from whole cloth.

With the new implementation, client nlm_host cache items are no longer
garbage collected, and are destroyed directly by a new release
function specialized for client entries, nlmclnt_release_host().  They
are cached in their own data structure, and have their own lookup
logic, simplified and specialized for client nlm_host entries.

However, the client nlm_host cache still shares reboot recovery logic
with the server nlm_host cache.  The NSM "peer rebooted" downcall for
clients and servers still come through the same RPC call.  This is a
legacy formal API that would be difficult to alter, and besides, the
user space NSM implementation can't tell the difference between peers
that are clients or servers.

For this reason, the client cache continues to share the
nlm_host_mutex (and reboot recovery logic) with the server cache.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nlm_release_call() function is invoked from both the server and
the client side.  We're about to introduce a distinct server- and
client-side nlm_release_host(), so nlm_release_call() must first be
split into a client-side and a server-side version.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Refactor the tail of nlm_gc_hosts() into nlm_destroy_host() so that
this logic can be used separately from garbage collection.

Rename it _locked() to document that it must be called with the hosts
cache mutex held.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Refactor nlm_host allocation and initialization into a separate
function.  This will be the common piece of server and client nlm_host
lookup logic after the nlm_host cache is split.

Small change: use kmalloc() instead of kzalloc(), as we're overwriting
almost all fields in the new nlm_host struct with non-zero values
immediately after it is allocated.  An added benefit is we now have an
explicit reference to each field name where it is initialized (for all
you cscope fans out there).
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Minor reorganization; no change in behavior.  This will save some
duplicated code after we split the client and server host caches.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
[ cel: Forward-ported to 2.6.37 ]
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We've got a lot of loops like this, and I find them a little easier to
read with the macros.  More such loops are coming.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
[ cel: Forward-ported to 2.6.37 ]
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere.  We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.

This is a refactoring change.  It should not cause different behavior.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere.  We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.

Also, all the client-side encoder functions return 0 now, making a
return value superfluous.  Take this opportunity to convert them to
return void instead.

This is a refactoring change.  It should not cause different behavior.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

Just fixed a panic where the nrprocs field in a different upper layer
client was set by hand incorrectly.  Use the compiler-generated method
used by the other upper layer protocols.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The trend in the other XDR encoder functions is to BUG() when encoding
problems occur, since a problem here is always due to a local coding
error.  Then, instead of a status, zero is unconditionally returned.

Update the rpcbind XDR encoders to behave this way.

To finish the update, use the new-style be32_to_cpup() and
cpu_to_be32() macros, and compute the buffer sizes using raw integers
instead of sizeof().  This matches the conventions used in other XDR
functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The UMNT request has a NULL response.  There's no need to set up a
mountres structure for it.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>