Standardize DEBUG_RODATA, removing special cases for hotplug and kprobes.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: pageexec@freemail.hu
Cc: akpm@linux-foundation.org
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

extern should not appear in C files.  Also, the definitions
do not match the prototype currently, not sure what way you
want to go with this, I've switched the prototype to return
int, but I can see going to the void return as well.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.

Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.

This part just implements the page pool and the initialization w/o
using it yet.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.

early_ioremap is updated to use the standard page table accessors.

Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.

Derived from patches by Eric Biederman and H. Peter Anvin.

[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]
Signed-off-by: NIan Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in arch/x86/mm/init_32.c.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

swsusp_pg_dir[] is used for suspend, but not for hibernation.
clean-up the ifdefs which worked by accident, while implying the opposite.
Delete the __nosavedata, which also implied the opposite.

Some day we may optimize CONFIG_ACPI_SLEEP to build minimal kernels
for just hibernate or just suspend but not both,
but today isn't that day.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

In x86 PAE mode, stop treating pmds as a special case.  Previously
they were always allocated and freed with the pgd.  The modifies the
code to be the same as 64-bit mode, where they are allocated on
demand.

This is a step on the way to unifying 32/64-bit pagetable allocation
as much as possible.

There is a complicating wart, however.  When you install a new
reference to a pmd in the pgd, the processor isn't guaranteed to see
it unless you reload cr3.  Since reloading cr3 also has the
side-effect of flushing the tlb, this is an expense that we want to
avoid whereever possible.

This patch simply avoids reloading cr3 unless the update is to the
current pagetable.  Later patches will optimise this further.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

printk fixes. NOP in terms of functionality, but strings got
a bit larger due to the KERN_ markers that were added.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

debug incorrect/late access to init memory, by permanently unmapping
the init memory ranges. Depends on CONFIG_DEBUG_PAGEALLOC=y.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd.
I also cleaned up the NX test code quite a bit, and got rid of the ugly
exception table sorting stuff.

From: Arjan van de Ven <arjan@linux.intel.com>

This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option
as well as the NX CPU feature/mappings. Both testcases can move to tests/
once that patch gets merged into mainline.
(I'm half considering moving the rodata test into mm/init.c but I'll
wait with that until init.c is unified)

As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h
for the RODATA sections, which lead to 1 page less being marked read only.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When we free initmem, various rodata and CPA checks may have left
memory read only.. this patch ensures that the memory is writable
before we free it.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The set_memory_* and set_pages_* family of API's currently requires the
callers to do a global tlb flush after the function call; forgetting this is
a very nasty deathtrap. This patch moves the global tlb flush into
each of the callers
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch converts various users of change_page_attr() to the new,
more intent driven set_page_*/set_memory_* API set.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The SMP trampoline always runs in real mode, so making it executable
in the page tables doesn't make much sense because it executes
before page tables are set up. That was the only user of
set_kernel_exec(). Remove set_kernel_exec().
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

No need to make it 64bit there.
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch renames bt_ioremap to early_ioremap, which is used in
x86_64. This makes it easier to merge i386 and x86_64 usage.

[ mingo@elte.hu: fix ]
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch makes it possible for bt_ioremap() to be used before
paging_init(), via providing an early implementation of set_fixmap()
that can be used before paging_init().

This way boot_ioremap() can be replaced by bt_ioremap().
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

based on this patch from Andi Kleen:

|  Subject: CPA: Return the page table level in lookup_address()
|  From: Andi Kleen <ak@suse.de>
|
|  Needed for the next change.
|
|  And change all the callers.

and ported it to x86.git.
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

- Rename it to pte_exec() from pte_exec_kernel(). There is nothing
kernel specific in there.
- Move it into the common file because _PAGE_NX is 0 on !PAE and then
pte_exec() will be always evaluate to true.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again.
This gives some simple testing for change_page_attr().
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert macros into inline functions, for better type-checking.

This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions.  I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add mm to paravirt_alloc_pd, partly to make it consistent with
paravirt_alloc_pt, and because later changes will make use of it.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Make users of supported_pte_mask common.  This has the side-effect of
introducing the variable for 32-bit non-PAE, but I think its a pretty
small cost to simplify the code.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Because the EFI memory map are converted to e820 memory map in bootloader, the
EFI memory map handling code is removed to clean up.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some code reformatting in init_32.c.  No functional change.
Signed-off-by: NJeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Denys Fedoryshchenko reported a bootup crash when he upgraded
his system from 3GB to 4GB RAM:

   http://lkml.org/lkml/2008/1/7/9

the bug is due to HIGHMEM4G && SPARSEMEM kernels making pfn_to_page()
to return an invalid pointer when the pfn is in a memory hole. The
256 MB PCI aperture at the end of RAM was not mapped by sparsemem,
and hence the pfn was not valid. But set_highmem_pages_init() iterated
this range without checking the pfn's validity first.

this bug was probably present in the sparsemem code ever since sparsemem
has been introduced in v2.6.13. It was masked due to HIGHMEM64G using
larger memory regions in sparsemem_32.h:

 #ifdef CONFIG_X86_PAE
 #define SECTION_SIZE_BITS       30
 #define MAX_PHYSADDR_BITS       36
 #define MAX_PHYSMEM_BITS        36
 #else
 #define SECTION_SIZE_BITS       26
 #define MAX_PHYSADDR_BITS       32
 #define MAX_PHYSMEM_BITS        32
 #endif

which creates 1GB sparsemem regions instead of 64MB sparsemem regions.
So in practice we only ever created true sparsemem holes on x86 with
HIGHMEM4G - but that was rarely used by distros.

( btw., we could probably save 2MB of mem_map[]s on X86_PAE if we reduced
  the sparsemem region size to 256 MB. )
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>

if CONFIG_PAGEALLOC is enabled then X86_FEATURE_PSE is disabled and all
the kernel physical RAM pagetables are set up as 4K pages. This is
needed so that CONFIG_PAGEALLOC can do finegrained mapping and unmapping
of pages.

as a side-effect though, the total size of memory allocated as kernel
pagetables increases significantly. All these pagetables are allocated
via alloc_bootmem_low_pages(), straight out of the lowmem DMA pool. If
the system has enough RAM and a large kernel image then almost all of
the 16 MB lowmem DMA pool is allocated to the image and to pagetables -
leaving no space for __GFP_DMA allocations.

this results in drivers failing and the bootup hanging:

 swapper invoked oom-killer: gfp_mask=0x80d1, order=0, oomkilladj=0
  [<4015059f>] out_of_memory+0x17f/0x1c0
  [<40151f3c>] __alloc_pages+0x37c/0x3a0
  [<40168cd7>] slob_new_page+0x37/0x50
  [<40168dff>] slob_alloc+0x10f/0x190
  [<40169010>] __kmalloc_node+0x80/0x90
  [<405a17e3>] scsi_host_alloc+0x33/0x2c0
  [<405a1a82>] scsi_register+0x12/0x60
  [<40d5889e>] aha1542_detect+0x9e/0x940
  [<405c5ba5>] ultrastor_detect+0x265/0x5f0
  [<401352f5>] getnstimeofday+0x35/0xf0
  [<40d58751>] init_this_scsi_driver+0x41/0xf0
  [<40d0b856>] kernel_init+0x136/0x310
  [<40d58710>] init_this_scsi_driver+0x0/0xf0
  [<40d0b720>] kernel_init+0x0/0x310
  [<40105547>] kernel_thread_helper+0x7/0x10
  =======================

the fix is to first allocate from above the DMA pool, and if that fails
(for example due to it being a machine with less than 16 MB of RAM),
allocate from the DMA pool as a fallback.

With this fix applied i was able to boot a PAGEALLOC=y kernel that would
hang before.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The conversion from using a slab cache to quicklist left some residual
dead code.

I note that in the conversion it now always allocates a whole page for
the pgd, rather than the 32 bytes needed for a PAE pgd.  Was this
intended?
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>

Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts most of commit 19d36ccd.

The way to DEBUG_RODATA interactions with KPROBES and CPU hotplug is to
just not mark the text as being write-protected in the first place.
Both of those facilities depend on rewriting instructions.

Having "helpful" debug facilities that just cause more problem is not
being helpful.  It just adds complexity and bugs. Not worth it.
Reported-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.

For ia64, just add a few stubs in anticipation of future
S3 or S4 support.
Signed-off-by: NLen Brown <len.brown@intel.com>

Reenable kprobes and alternative patching when the kernel text is write
protected by DEBUG_RODATA

Add a general utility function to change write protected text.  The new
function remaps the code using vmap to write it and takes care of CPU
synchronization.  It also does CLFLUSH to make icache recovery faster.

There are some limitations on when the function can be used, see the
comment.

This is a newer version that also changes the paravirt_ops code.
text_poke also supports multi byte patching now.

Contains bug fixes from Zach Amsden and suggestions from Mathieu
Desnoyers.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Zach Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Constrain __supported_pte_mask and NX handling to just the PAE kernel.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>