- 17 4月, 2008 4 次提交
-
-
由 Andi Kleen 提交于
Currently they are in .text.head because the rest of head_64.S. .text.head is not removed as init data, but the early exception handlers should be because they are not needed after early boot of the BP. So move them over. Signed-off-by: NAndi Kleen <ak@suse.de> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
The early exception handlers are currently set up using a macro recursion. There is only one user left. Replace the macro with a standard loop in place. Noop patch, just a cleanup. [ tglx@linutronix.de: simplified ] Signed-off-by: NAndi Kleen <ak@suse.de> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
All of early setup runs with interrupts disabled, so there is no need to set up early exception handlers for vectors >= 32 This saves some minor text size. Signed-off-by: NAndi Kleen <ak@suse.de> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
people sometimes do crazy stuff like building really large static arrays into their kernels or building allyesconfig kernels. Give more space to the kernel and push modules up a bit: kernel has 512 MB and modules have 1.5 GB. Should be enough for a few years ;-) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 2月, 2008 2 次提交
-
-
由 Ingo Molnar 提交于
The KERNEL_TEXT_SIZE constant was mis-named, as we not only map the kernel text but data, bss and init sections as well. That name led me on the wrong path with the KERNEL_TEXT_SIZE regression, because i knew how big of _text_ my images have and i knew about the 40 MB "text" limit so i wrongly thought to be on the safe side of the 40 MB limit with my 29 MB of text, while the total image size was slightly above 40 MB. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
recently the 64-bit allyesconfig bzImage kernel started spontaneously rebooting during early bootup. after a few fun hours spent with early init debugging, it turns out that we've got this rather annoying limit on the size of the kernel image: #define KERNEL_TEXT_SIZE (40*1024*1024) which limit my vmlinux just happened to pass: text data bss dec hex filename 29703744 4222751 8646224c 42572719 2899baf vmlinux 40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/ So it happily crashed right in head_64.S, which - as we all know - is the most debuggable code in the whole architecture ;-) So increase the limit to allow an up to 128MB kernel image to be mapped. (should anyone be that crazy or lazy) We have a full 4K of pagetable (level2_kernel_pgt) allocated for these mappings already, so there's no RAM overhead and the limit was rather pointless and arbitrary. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 2月, 2008 2 次提交
-
-
由 Sam Ravnborg 提交于
initial_code are initially used to hold a function pointer from __init and later from __cpuinit. This confuses modpost and changing initial_code to REFDATA silence the warning. (But now we do not discard the variable anymore). Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting from __START_KERNEL_map. The kernel itself only needs _text to _end mapped in the high alias. On relocatible kernels the ASM setup code adjusts the compile time created high mappings to the relocation. This creates invalid pmd entries for negative offsets: 0xffffffff80000000 -> pmd entry: ffffffffff2001e3 It points outside of the physical address space and is marked present. This starts at the virtual address __START_KERNEL_map and goes up to the point where the first valid physical address (0x0) is mapped. Zap the mappings before _text and after _end right away in early boot. This removes also the invalid entries. Furthermore it simplifies the range check for high aliases. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 2月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
fix 64-bit section warnings. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 2月, 2008 1 次提交
-
-
由 Andi Kleen 提交于
Fix up all users. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 1月, 2008 3 次提交
-
-
由 Ingo Molnar 提交于
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
under paravirt, read cr2 cannot be issued directly anymore. So wrap it in a macro, defined to the operation itself in case paravirt is off, but to something else if we have paravirt in the game Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 2 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 8月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
Very old binutils (2.12.90...) seem to have trouble with newlines in assembler macro invocation. They put them into the resulting argument expansion. In this case this lead to a parse error because a .rept expression ended up spread over multiple lines. Change the PMDS() invocation to a single line. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 7月, 2007 1 次提交
-
-
由 Len Brown 提交于
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: NLen Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 7月, 2007 1 次提交
-
-
由 Len Brown 提交于
As it was a synonym for (CONFIG_ACPI && CONFIG_X86), the ifdefs for it were more clutter than they were worth. For ia64, just add a few stubs in anticipation of future S3 or S4 support. Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 23 7月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
Get rid of warnings like WARNING: vmlinux.o(.bootstrap.text+0x1a8): Section mismatch: reference to .init.text:x86_64_start_kernel (between 'initial_code' and 'init_rsp') - Move initialization code into .text.head like i386 because modpost knows about this already - Mark initial_code .initdata Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Eric W. Biderman 提交于
Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: NEric W. Biderman <ebiderman@xmisson.com> Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 9 次提交
-
-
由 Andi Kleen 提交于
suggested by Jan Beulich Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
On x86-64, kernel memory freed after init can be entirely unmapped instead of just getting 'poisoned' by overwriting with a debug pattern. On i386 and x86-64 (under CONFIG_DEBUG_RODATA), kernel text and bug table can also be write-protected. Compared to the first version, this one prevents re-creating deleted mappings in the kernel image range on x86-64, if those got removed previously. This, together with the original changes, prevents temporarily having inconsistent mappings when cacheability attributes are being changed on such pages (e.g. from AGP code). While on i386 such duplicate mappings don't exist, the same change is done there, too, both for consistency and because checking pte_present() before using various other pte_XXX functions is a requirement anyway. At once, i386 code gets adjusted to use pte_huge() instead of open coding this. AK: split out cpa() changes Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
This patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol. When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu. AK: changed to not make RELOCATABLE default in Kconfig Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
With the rewrite of the SMP trampoline and the early page allocator there is nothing that needs identity mapped pages, once we start executing C code. So add zap_identity_mappings into head64.c and remove zap_low_mappings() from much later in the code. The functions are subtly different thus the name change. This also kills boot_level4_pgt which was from an earlier attempt to move the identity mappings as early as possible, and is now no longer needed. Essentially I have replaced boot_level4_pgt with trampoline_level4_pgt in trampoline.S Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
o Moved wakeup_level4_pgt into the wakeup routine so we can run the kernel above 4G. o Now we first go to 64bit mode and continue to run from trampoline and then then start accessing kernel symbols and restore processor context. This enables us to resume even in relocatable kernel context when kernel might not be loaded at physical addr it has been compiled for. o Removed the need for modifying any existing kernel page table. o Increased the size of the wakeup routine to 8K. This is required as wake page tables are on trampoline itself and they got to be at 4K boundary, hence one page is not sufficient. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
This modifies the SMP trampoline and all of the associated code so it can jump to a 64bit kernel loaded at an arbitrary address. The dependencies on having an idenetity mapped page in the kernel page tables for SMP bootup have all been removed. In addition the trampoline has been modified to verify that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Move __KERNEL32_CS up into the unused gdt entry. __KERNEL32_CS is used when entering the kernel so putting it first is useful when trying to keep boot gdt sizes to a minimum. Set the accessed bit on all gdt entries. We don't care so there is no need for the cpu to burn the extra cycles, and it potentially allows the pages to be immutable. Plus it is confusing when debugging and your gdt entries mysteriously change. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
- Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Early in the boot process we need the ability to set up temporary mappings, before our normal mechanisms are initialized. Currently this is used to map pages that are part of the page tables we are building and pages during the dmi scan. The core problem is that we are using the user portion of the page tables to implement this. Which means that while this mechanism is active we cannot catch NULL pointer dereferences and we deviate from the normal ways of handling things. In this patch I modify early_ioremap to map pages into the kernel portion of address space, roughly where we will later put modules, and I make the discovery of which addresses we can use dynamic which removes all kinds of static limits and remove the dependencies on implementation details between different parts of the code. Now alloc_low_page() and unmap_low_page() use early_iomap() and early_iounmap() to allocate/map and unmap a page. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 13 2月, 2007 1 次提交
-
-
由 Zachary Amsden 提交于
Initialize FS and GS to __KERNEL_DS as well. The actual value of them is not important, but it is important to reload them in protected mode. At this time, they still retain the real mode values from initial boot. VT disallows execution of code under such conditions, which means hardware virtualization can not be used to boot the kernel on Intel platforms, making the boot time painfully slow. This requires moving the GS load before the load of GS_BASE, so just move all the segments loads there to keep them together in the code. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 26 9月, 2006 3 次提交
-
-
由 Eric W. Biederman 提交于
In long mode the %cs is largely a relic. However there are a few cases like iret where it matters that we have a valid value. Without this patch it is possible to enter the kernel in startup_64 without setting %cs to a valid value. With this patch we don't care what %cs value we enter the kernel with, so long as the cs shadow register indicates it is a privileged code segment. Thanks to Magnus Damm for finding this problem and posting the first workable patch. I have moved the jump to set %cs down a few instructions so we don't need to take an extra jump. Which keeps the code simpler. Signed-of-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
CVS hasn't been used for a long time for them. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vojtech Pavlik 提交于
This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP capability uses either the RDTSCP or CPUID to obtain a CPU and node numbers and pass them to the program. AK: Lots of changes over Vojtech's original code: Better prototype for vgetcpu() It's better to pass the cpu / node numbers as separate arguments to avoid mistakes when going from SMP to NUMA. Also add a fast time stamp based cache using a user supplied argument to speed things more up. Use fast method from Chuck Ebbert to retrieve node/cpu from GDT limit instead of CPUID Made sure RDTSCP init is always executed after node is known. Drop printk Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 31 8月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 3月, 2006 2 次提交
-
-
由 Arjan van de Ven 提交于
This patch puts the code from head.S in a special .bootstrap.text section. I'm working on a patch to reorder the functions in the kernel (I'll post that later), but for x86-64 at least the kernel bootstrap requires that the head.S functions are on the very first page/pages of the kernel text. This is understandable since the bootstrap is complex enough already and not a problem at all, it just means they aren't allowed to be reordered. This patch puts these special functions into a separate section to document this, and to guarantee this in the light of possibly reordering the rest later. (So this patch doesn't fix a bug per se, but makes things more robust by making the order of these functions explicit) Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
- adjust limits of GDT/IDT pseudo-descriptors (some were off by one) - move empty_zero_page into .bss.page_aligned - move cpu_gdt_table into .data.page_aligned - move idt_table into .bss - align inital_code and init_rsp - eliminate pointless (re-)declaration of idt_table in traps.c Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 2月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
But do it after everything else to risk less from recursive crashes. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 2 次提交
-
-
由 Andi Kleen 提交于
They used to be used by the reboot code, but not anymore. Noticed by Jan Beulich Cc: JBeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
This patch is on the same lines as Zachary Amsden's i386 GDT page alignemnt patch in -mm, but for x86_64. Patch to align and pad x86_64 GDT on page boundries. [AK: some minor cleanups and fixed incorrect TLS initialization in CPU init.] Signed-off-by: NNippun Goel <nippung@calsoftinc.com> Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-