When the FIF_FCSFAIL filter flag is set, pass frames with CRC errors.
Signed-off-by: NMathy Vanhoef <vanhoefm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

I was reading ath5k power setting code and
noticed typing error in ath5k_hw_txpower function.
Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX
register.
Signed-off-by: NNikolay Ledovskikh <nledovskikh@gmail.com>
Acked-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Trivial patch to address this trace. Now calls dma_mapping_error and
return -ENOSPC if a problem found.

WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x960()
Hardware name: Aspire 5515
ath5k 0000:02:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000874fcd42] [size=45 bytes] [mapped as
single]
Modules linked in: bnep bluetooth ebtable_filter ebtables
ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio
cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm
ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
scsi_transport_iscsi arc4 snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_seq snd_seq_device ath5k ath snd_pcm
sparse_keymap snd_page_alloc mac80211 snd_timer sp5100_tco snd edac_core
k8temp soundcore edac_mce_amd i2c_piix4 cfg80211 rfkill shpchp vhost_net
tun macvtap macvlan kvm_amd kvm uinput dm_crypt ata_generic pata_acpi
radeon i2c_algo_bit pata_atiixp drm_kms_helper ttm drm r8169 mii
i2c_core wmi video sunrpc
Pid: 820, comm: firewalld Not tainted 3.9.0-0.rc3.git1.4.fc19.x86_64 #1
Call Trace:
 <IRQ>  [<ffffffff81068df0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff81068e6c>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff8137ebeb>] check_unmap+0x47b/0x960
 [<ffffffff81021cf5>] ? native_sched_clock+0x15/0x80
 [<ffffffff81021d69>] ? sched_clock+0x9/0x10
 [<ffffffff8137f12f>] debug_dma_unmap_page+0x5f/0x70
 [<ffffffffa048fa07>] ath5k_tasklet_tx+0x157/0x3f0 [ath5k]
 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80
 [<ffffffff81072aa6>] ? tasklet_action+0x56/0x210
 [<ffffffff81072ae7>] tasklet_action+0x97/0x210
 [<ffffffff8107343f>] __do_softirq+0xff/0x400
 [<ffffffff81073905>] irq_exit+0xb5/0xc0
 [<ffffffff81728916>] do_IRQ+0x56/0xc0
 [<ffffffff8171dc32>] common_interrupt+0x72/0x72
 <EOI>  [<ffffffff811f1f81>] ? dput+0x111/0x310
 [<ffffffff811f1ea7>] ? dput+0x37/0x310
 [<ffffffff811e75e8>] link_path_walk+0x528/0x910
 [<ffffffff811ea624>] path_openat+0x94/0x530
 [<ffffffff811eb148>] do_filp_open+0x38/0x80
 [<ffffffff811e1dda>] open_exec+0x4a/0x130
 [<ffffffff81238be3>] load_elf_binary+0x7f3/0x18e0
 [<ffffffff81021d69>] ? sched_clock+0x9/0x10
 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80
 [<ffffffff810acd98>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff810d515d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810acedf>] ? local_clock+0x5f/0x70
 [<ffffffff810d5dbf>] ? lock_release_holdtime.part.28+0xf/0x190
 [<ffffffff812383f0>] ? elf_core_dump+0x1980/0x1980
 [<ffffffff811e1151>] search_binary_handler+0x1a1/0x4f0
 [<ffffffff811e1017>] ? search_binary_handler+0x67/0x4f0
 [<ffffffff811e28fc>] do_execve_common.isra.26+0x64c/0x710
 [<ffffffff811e23c2>] ? do_execve_common.isra.26+0x112/0x710
 [<ffffffff811e2cc6>] sys_execve+0x36/0x50
 [<ffffffff81727249>] stub_execve+0x69/0xa0
Signed-off-by: NJohn Greene <jogreene@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Only one channel is returned - the one currently being used.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In the original code we shift "AR5K_PHY(256) >> 28" which is zero but
the intent was to shift the return value of ath5k_hw_reg_read() like we
do a couple lines later.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This value is no longer used by mac80211, and practically no
driver ever set it to a correct value anyway, so remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be
used when each argument is an array within a structure that contains at
least two bytes of data beyond the array.

The structures involved are:
ieee80211_mgmt defined in include/linux/ieee80211.h and
ath_common defined in drivers/net/wireless/ath/ath.h

This was done using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Some cards don't update the PISR properly when all SISR bits
for Tx interrupts are being cleared and as a result we get
interrupt storm. Since we handle all tx queues all together
(so we don't really use the SISR bits to do per-queue interrupt
handling), we can manualy update PISR by doing a write-to-clear
on its Tx interrupt bits.
Signed-off-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The regression was introduced in the following commit:

0967e01e
"ath5k: make use of the new rate control API"

ath5k_tx_frame_completed saves the intended per-rate retry counts before
they are cleared by ieee80211_tx_info_clear_status, however at this
point the information in info->status.rates is incomplete.

This causes significant throughput degradation and excessive packet loss
on links where high bit rates don't work properly.

Move the copy from bf->rates a few lines up to ensure that the saved
retry counts are updated, and that they are really cleared in
info->status.rates after the call to ieee80211_tx_info_clear_status.

Cc: stable@vger.kernel.org # 3.10+
Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Cc: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de>
Reported-by: NBen West <ben@gowasabi.net>
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Acked-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Avoid processing garbage data by NULL terminating the strings.
Signed-off-by: NDjalal Harouni <tixxdz@opendz.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Bit 32 was always set which looks to have been accidental,
according to git history.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch enabels ath5k to use the new rate table to lookup each
mrr rate and retry information per packet.
Signed-off-by: NBenjamin Vahl <bvahl@net.t-labs.tu-berlin.de>
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch claim to fix "WARNING: at net/mac80211/util.c:599
ieee80211_can_queue_work.isra.7+0x30/0x40", which was reported at:

https://bugzilla.redhat.com/show_bug.cgi?id=922295

We use ATH_STAT_STARTED flag to disallow to perform
ath5k_tx_complete_poll_work() code, hence reschedule
ah->tx_complete_work, when we stop device. This flag was defined in
ath5k code, but it was not used.

I didn't get feedback if the fix works, so patch is compile only tested.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Pretty much everywhere that uses a trace definition
header that's not in include/trace/events/ uses the
make system for the include path rather than putting
it into the sources, so do that in ath5k as well.

This came up during backporting work (where this is
required), but since all other drivers do it this
way upstream it seemed applicable.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Drivers that don't use chanctxes cannot perform VHT association because
they still use a "backward compatibility" pair of {ieee80211_channel,
nl80211_channel_type} in ieee80211_conf and ieee80211_local.
Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com>
[fix kernel-doc]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Stop returning negative values from ath5k_eeprom_mode_from_channel.
Yell loudly about that case in that function instead and return the
default/zero/mode A. This cleans up the callers, but needs to pass ah
down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that
purpose we also need the declaration to be moved to ath5k.h.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It can, if invalid argument given, return a negative value. In that
case we would access arrays out-of-bounds and such. Check the value
and yell loudly if that happened as it would be a bug in the
implementation. (Instead of silently corrupting memory.)
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The reg_notifier()'s return value need not be checked
as it is only supposed to do post regulatory work and
that should never fail. Any behaviour to regulatory
that needs to be considered before cfg80211 does work
to a driver should be specified by using the already
existing flags, the reg_notifier() just does post
processing should it find it needs to.

Also make lbs_reg_notifier static.
Signed-off-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com>
[move lbs_reg_notifier to not break compile]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This is true for at least AR5213, and shouldn't be different for other
ath5k PHYs. Tested on AR2413 and AR5414.
Signed-off-by: NThomas Pedersen <thomas@cozybit.com>
Tested-by: NBob Copeland <me@bobcopeland.com>
Acked-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for
tx packets passed to the driver from mac80211
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org
Cc: ath5k-devel@lists.ath5k.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

There are 2 different things:
- sub-menu for "Atheros Wireless cards" family
- module ath.ko with common Atheros code

Until now, they both used to depend on the same Kconfig variable ATH_COMMON.
Thus, being "Atheros card" and "depending on ath.ko" was the same.

To allow module to belong to the
"Atheros Wireless cards" family but not use ath.ko,
2 conditions above need to be separated.

So, this patch introduce new Kconfig variable ATH_CARDS for belonging
to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden
variable to express dependency on common Atheros code in ath.ko. Modules
that depend on this common code now express it by setting ATH_COMMON.

Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON.
Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

'|' has higher precedence than ?:.  Since AR5K_PHY_TURBO_MODE is 0x1 and
"AR5K_PHY_TURBO_MODE | (ah->ah_radio == AR5K_RF2425)" is true then we
always set turbo to zero.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Simplify the code by make use of module_platform_driver macro.
Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Allow drivers to indicate their mactime is at RX completion and adjust
for this in mac80211. Also rename the existing RX_FLAG_MACTIME_MPDU to
RX_FLAG_MACTIME_START to clarify its intent. Based on similar code by
Johannes Berg.
Signed-off-by: NThomas Pedersen <thomas@cozybit.com>
[fix docs, atheros drivers]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

During hardware restart, all interfaces are iterated even
though they haven't been re-added to the driver, document
this behaviour. The same also happens during resume, which
is even more confusing since all of the interfaces were
previously removed from the driver. Make this optional so
drivers relying on the current behaviour can still use it,
but to let drivers that don't want this behaviour disable
it.

Also convert all API users, keeping the old semantics
except in hwsim, where the new normal ones are desired.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The dereference should be moved below the NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

https://bugzilla.kernel.org/show_bug.cgi?id=47681Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Hardware support for MFP is not available in ath5k. Thus,
this implementation allows the mac80211 stack to do the
actuall crypto operation.
Signed-off-by: NChun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Mark keys that might be used to receive management
frames so drivers can fall back on software crypto
for them if they don't support hardware offload.
As the new flag is only set correctly for RX keys
and the existing IEEE80211_KEY_FLAG_SW_MGMT flag
can only affect TX, also rename the latter to
IEEE80211_KEY_FLAG_SW_MGMT_TX.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch reduces the per rate target power eeprom reads for
AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid
power curve entries on the eeprom. The former 10 reads lead to
equal max power limits per rate and this causes an increasing
distortion for all rates above 24 MBit and leads to a needless
poor performance in 802.11a mode.
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Lockdep found an inconsistent lock state when joining a mesh with
ath5k.  The problem is that ath5k takes the lock for its beacon state,
ah->block, with spin_lock_irqsave(), while mesh internally takes the
sync_offset_lock with spin_lock_bh() in mesh_sync_offset_adjust_tbtt(),
which in turn is called under ah->block.

This could deadlock if the beacon tasklet was run on the processor
that held the beacon lock during the do_softirq() in spin_unlock_bh().

We probably shouldn't hold the lock around the callbacks, but the
easiest fix is to switch to spin_lock_bh for ah->block: it doesn't
need interrupts disabled anyway as the data in question is only accessed
in softirq or process context.

Fixes the following lockdep warning:

[  446.892304] WARNING: at kernel/softirq.c:159 _local_bh_enable_ip+0x38/0xa6()
[  446.892306] Hardware name: MacBook1,1
[  446.892309] Modules linked in: tcp_lp fuse sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 ip6table_filter nf_defrag_ipv4 xt_state nf_conntrack ip6_tables ext2 arc4 btusb bluetooth snd_hda_codec_idt snd_hda_intel carl9170 snd_hda_codec coretemp joydev ath5k snd_hwdep snd_seq isight_firmware ath snd_seq_device snd_pcm applesmc appletouch mac80211 input_polldev snd_timer microcode cfg80211 snd lpc_ich pcspkr i2c_i801 mfd_core soundcore rfkill snd_page_alloc sky2 tpm_infineon virtio_net kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit i2c_core video
[  446.892385] Pid: 1892, comm: iw Not tainted 3.6.0-rc1-wl+ #296
[  446.892387] Call Trace:
[  446.892394]  [<c0432958>] warn_slowpath_common+0x7c/0x91
[  446.892398]  [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6
[  446.892403]  [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6
[  446.892459]  [<f7f9ae3b>] ? mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211]
[  446.892464]  [<c043298f>] warn_slowpath_null+0x22/0x24
[  446.892468]  [<c04399d7>] _local_bh_enable_ip+0x38/0xa6
[  446.892473]  [<c0439a52>] local_bh_enable_ip+0xd/0xf
[  446.892479]  [<c088004f>] _raw_spin_unlock_bh+0x34/0x37
[  446.892527]  [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211]
[  446.892569]  [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211]
[  446.892575]  [<c047ceeb>] ? trace_hardirqs_on_caller+0x10e/0x13f
[  446.892591]  [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k]
[  446.892597]  [<c047ad67>] ? lock_acquired+0x1f5/0x21e
[  446.892612]  [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k]
[  446.892617]  [<c087f9ea>] ? _raw_spin_lock_irqsave+0x78/0x82
[  446.892632]  [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k]
[  446.892647]  [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k]
[  446.892651]  [<c0479dd4>] ? lock_is_held+0x73/0x7b
[  446.892662]  [<c0458fd5>] ? __might_sleep+0xa7/0x17a
[  446.892698]  [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211]
[  446.892703]  [<c0449875>] ? queue_work+0x24/0x32
[  446.892718]  [<f7fdf894>] ? ath5k_configure_filter+0x163/0x163 [ath5k]
[  446.892766]  [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211]
[  446.892806]  [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211]
[  446.892834]  [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211]
[  446.892855]  [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211]
[  446.892875]  [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211]
[  446.892908]  [<f7a8db99>] ? nl80211_set_wiphy+0x4cf/0x4cf [cfg80211]
[  446.892919]  [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3
[  446.892940]  [<c07cf861>] ? genl_rcv+0x25/0x25
[  446.892946]  [<c07cf009>] netlink_rcv_skb+0x37/0x78
[  446.892950]  [<c07cf85a>] genl_rcv+0x1e/0x25
[  446.892955]  [<c07cebf3>] netlink_unicast+0xc3/0x12d
[  446.892959]  [<c07cee46>] netlink_sendmsg+0x1e9/0x213
[  446.892966]  [<c079f282>] sock_sendmsg+0x79/0x96
[  446.892972]  [<c04eb90d>] ? might_fault+0x9d/0xa3
[  446.892978]  [<c07a81d8>] ? copy_from_user+0x8/0xa
[  446.892983]  [<c07a852c>] ? verify_iovec+0x43/0x77
[  446.892987]  [<c079f4d8>] __sys_sendmsg+0x180/0x215
[  446.892993]  [<c045f107>] ? sched_clock_cpu+0x134/0x144
[  446.892997]  [<c047992f>] ? trace_hardirqs_off+0xb/0xd
[  446.893002]  [<c047bf88>] ? __lock_acquire+0x46b/0xb6e
[  446.893006]  [<c047992f>] ? trace_hardirqs_off+0xb/0xd
[  446.893010]  [<c045f149>] ? local_clock+0x32/0x49
[  446.893015]  [<c0479ec1>] ? lock_release_holdtime.part.9+0x4b/0x51
[  446.893020]  [<c0479dd4>] ? lock_is_held+0x73/0x7b
[  446.893025]  [<c050d127>] ? fcheck_files+0x97/0xcd
[  446.893029]  [<c050d4df>] ? fget_light+0x2d/0x81
[  446.893034]  [<c07a01f3>] sys_sendmsg+0x3b/0x52
[  446.893038]  [<c07a07b4>] sys_socketcall+0x238/0x2a2
[  446.893044]  [<c0885edf>] sysenter_do_call+0x12/0x38
[  446.893047] ---[ end trace a9af5998f929270f ]---
[  447.627222]
[  447.627232] =================================
[  447.627237] [ INFO: inconsistent lock state ]
[  447.627244] 3.6.0-rc1-wl+ #296 Tainted: G        W
[  447.627248] ---------------------------------
[  447.627253] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  447.627260] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  447.627264]  (&(&ah->block)->rlock){+.?...}, at: [<f7fdd2d1>] ath5k_tasklet_beacon+0x91/0xa7 [ath5k]
[  447.627299] {SOFTIRQ-ON-W} state was registered at:
[  447.627304]   [<c047cdbf>] mark_held_locks+0x59/0x77
[  447.627316]   [<c047ceeb>] trace_hardirqs_on_caller+0x10e/0x13f
[  447.627324]   [<c047cf27>] trace_hardirqs_on+0xb/0xd
[  447.627332]   [<c0439a3d>] _local_bh_enable_ip+0x9e/0xa6
[  447.627342]   [<c0439a52>] local_bh_enable_ip+0xd/0xf
[  447.627349]   [<c088004f>] _raw_spin_unlock_bh+0x34/0x37
[  447.627359]   [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211]
[  447.627451]   [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211]
[  447.627526]   [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k]
[  447.627547]   [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k]
[  447.627569]   [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211]
[  447.627628]   [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211]
[  447.627712]   [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211]
[  447.627782]   [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211]
[  447.627816]   [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211]
[  447.627845]   [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211]
[  447.627872]   [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3
[  447.627881]   [<c07cf009>] netlink_rcv_skb+0x37/0x78
[  447.627891]   [<c07cf85a>] genl_rcv+0x1e/0x25
[  447.627898]   [<c07cebf3>] netlink_unicast+0xc3/0x12d
[  447.627907]   [<c07cee46>] netlink_sendmsg+0x1e9/0x213
[  447.627915]   [<c079f282>] sock_sendmsg+0x79/0x96
[  447.627926]   [<c079f4d8>] __sys_sendmsg+0x180/0x215
[  447.627934]   [<c07a01f3>] sys_sendmsg+0x3b/0x52
[  447.627941]   [<c07a07b4>] sys_socketcall+0x238/0x2a2
[  447.627949]   [<c0885edf>] sysenter_do_call+0x12/0x38
[  447.627959] irq event stamp: 1929200
[  447.627963] hardirqs last  enabled at (1929200): [<c043a0e9>] tasklet_hi_action+0x3e/0xbf
[  447.627972] hardirqs last disabled at (1929199): [<c043a0c0>] tasklet_hi_action+0x15/0xbf
[  447.627981] softirqs last  enabled at (1929196): [<c043999d>] _local_bh_enable+0x12/0x14
[  447.627989] softirqs last disabled at (1929197): [<c040443b>] do_softirq+0x63/0xb8
[  447.627999]
[  447.627999] other info that might help us debug this:
[  447.628004]  Possible unsafe locking scenario:
[  447.628004]
[  447.628009]        CPU0
[  447.628012]        ----
[  447.628016]   lock(&(&ah->block)->rlock);
[  447.628023]   <Interrupt>
[  447.628027]     lock(&(&ah->block)->rlock);
[  447.628034]
[  447.628034]  *** DEADLOCK ***
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Put power_level to ah_txpower struct with the rest tx power infos and
also rename it to txp_requested to make more sense.

v2 make sure we don't memset it to zero on reset
Signed-off-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>