- 19 8月, 2005 2 次提交
-
-
由 Chuck Lever 提交于
Introduce atomic bitops to manipulate the bits in the nfs_inode structure's "flags" field. Using bitops means we can use a generic wait_on_bit call instead of an ad hoc locking scheme in fs/nfs/inode.c, so we can remove the "nfs_i_wait" field from nfs_inode at the same time. The other new flags field will continue to use bitmask and logic AND and OR. This permits several flags to be set at the same time efficiently. The following patch adds a spin lock to protect these flags, and this spin lock will later cover other fields in the nfs_inode structure, amortizing the cost of using this type of serialization. Test plan: Millions of fsx ops on SMP clients. Signed-off-by: NChuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Lever 提交于
Certain bits in nfsi->flags can be manipulated with atomic bitops, and some are better manipulated via logical bitmask operations. This patch splits the flags field into two. The next patch introduces atomic bitops for one of the fields. Test plan: Millions of fsx ops on SMP clients. Signed-off-by: NChuck Lever <cel@netapp.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 8月, 2005 1 次提交
-
-
由 Trond Myklebust 提交于
When the client performs an exclusive create and opens the file for writing, a Netapp filer will first create the file using the mode 01777. It does this since an NFSv3/v4 exclusive create cannot immediately set the mode bits. The 01777 mode then gets put into the inode->i_mode. After the file creation is successful, we then do a setattr to change the mode to the correct value (as per the NFS spec). The problem is that nfs_refresh_inode() no longer updates inode->i_mode, so the latter retains the 01777 mode. A bit later, the VFS notices this, and calls remove_suid(). This of course now resets the file mode to inode->i_mode & 0777. Hey presto, the file mode on the server is now magically changed to 0777. Duh... Fixes http://bugzilla.linux-nfs.org/show_bug.cgi?id=32Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2005 17 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Even if the file is open for writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Unless we're doing O_APPEND writes, we really don't care about revalidating the file length. Just make sure that we catch any page cache invalidations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Instead of looking at whether or not the file is open for writes before we accept to update the length using the server value, we should rather be looking at whether or not we are currently caching any writes. Failure to do so means in particular that we're not updating the file length correctly after obtaining a POSIX or BSD lock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Olivier Galibert 提交于
NFSv3 currently returns the unsigned 64-bit cookie directly to userspace. The following patch causes the kernel to generate loff_t offsets for the benefit of userland. The current server-generated READDIR cookie is cached in the nfs_open_context instead of in filp->f_pos, so we still end up work correctly under directory insertions/deletion. Signed-off-by: NOlivier Galibert <galibert@pobox.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Initialize the inode cache values correctly. Clean up __nfs3_forget_cached_acls() Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andreas Gruenbacher 提交于
NFSv3 has no concept of a umask on the server side: The client applies the umask locally, and sends the effective permissions to the server. This behavior is wrong when files are created in a directory that has a default ACL. In this case, the umask is supposed to be ignored, and only the default ACL determines the file's effective permissions. Usually its the server's task to conditionally apply the umask. But since the server knows nothing about the umask, we have to do it on the client side. This patch tries to fetch the parent directory's default ACL before creating a new file, computes the appropriate create mode to send to the server, and finally sets the new file's access and default acl appropriately. Many thanks to Buck Huppmann <buchk@pobox.com> for sending the initial version of this patch, as well as for arguing why we need this change. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andreas Gruenbacher 提交于
This adds acl support fo nfs clients via the NFSACL protocol extension, by implementing the getxattr, listxattr, setxattr, and removexattr iops for the system.posix_acl_access and system.posix_acl_default attributes. This patch implements a dumb version that uses no caching (and thus adds some overhead). (Another patch in this patchset adds caching as well.) Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Currently we return -ENOMEM for every single failure to create a new auth. This is actually accurate for auth_null and auth_unix, but for auth_gss it's a bit confusing. Allow rpcauth_create (and the ->create methods) to return errors. With this patch, the user may sometimes see an EINVAL instead. Whee. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Add nfs4_acl field to the nfs_inode, and use it to cache acls. Only cache acls of size up to a page. Also prepare for up to a page of acl data even when the user doesn't pass in a buffer, as when they want to get the acl length to decide what size buffer to allocate. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
ACL support will require supporting additional inode operations in v4 (getxattr, setxattr, listxattr). This patch allows different protocol versions to support different inode operations by adding a file_inode_ops to the nfs_rpc_ops (to match the existing dir_inode_ops). Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Remove the wait queue, and replace the functions that depended on it with wait_on_bit(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
- Move NFSv4 state definitions into a private header file. - Clean up gunk in nfs_fs.h Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we fix up the missing fields in the nfs_mount_data with sane defaults for older versions of mount, and return errors in the cases where we cannot. Convert a bunch of annoying warnings into dprintks() Return -EPROTONOSUPPORT rather than EIO if mount() tries to set NFSv3 without it actually being compiled in. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This saves us a couple of lines of cleanup code for each call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 5月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
This patch makes some needlessly global identifiers static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NArjan van de Ven <arjanv@infradead.org> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-