- 23 4月, 2010 12 次提交
-
-
由 Paul LeoNerd Evans 提交于
Add an SKF_AD_HATYPE field to the packet ancilliary data area, giving access to skb->dev->type, as reported in the sll_hatype field. When capturing packets on a PF_PACKET/SOCK_RAW socket bound to all interfaces, there doesn't appear to be a way for the filter program to actually find out the underlying hardware type the packet was captured on. This patch adds such ability. This patch also handles the case where skb->dev can be NULL, such as on netlink sockets. Signed-off-by: NPaul Evans <leonerd@leonerd.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Account for TSO segments of an skb in TCP_MIB_OUTSEGS counter. Without doing this, the counter can be off by orders of magnitude from the actual number of segments sent. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Update version to indicate IDC(fw recovery) changes. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
We do netif_device_attach, even if resource allocation fails. Driver callbacks can be called, if device is attached. All these callbacks need to be protected by ADAPTER_UP_MAGIC check. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Rcv producer value should be read in spin-lock. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Driver should not go ahead with fw recovery if fails to acquire semaphore. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Defining macro to set and clear driver state. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Now any pci-func can start fw, whoever sees the reset ack first. Before this, pci-func which sets the RESET state has the responsibility to start fw. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Different class of drivers co-exist for CNA device, there is some minimal interaction that will be required amongst the drivers for performing some device level operations. All the driver should follow inter driver coexistence document. Fixing polling interval and spelling mistake. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch adds IPv6 support for RFC5082 Generalized TTL Security Mechanism. Not to users of mapped address; the IPV6 and IPV4 socket options are seperate. The server does have to deal with both IPv4 and IPv6 socket options and the client has to handle the different for each family. On client: int ttl = 255; getaddrinfo(argv[1], argv[2], &hint, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET) { setsockopt(s, IPPROTO_IP, IP_TTL, &ttl, sizeof(ttl)); } else if (rp->ai_family == AF_INET6) { setsockopt(s, IPPROTO_IPV6, IPV6_UNICAST_HOPS, &ttl, sizeof(ttl))) } if (connect(s, rp->ai_addr, rp->ai_addrlen) == 0) { ... On server: int minttl = 255 - maxhops; getaddrinfo(NULL, port, &hints, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET6) setsockopt(s, IPPROTO_IPV6, IPV6_MINHOPCOUNT, &minttl, sizeof(minttl)); setsockopt(s, IPPROTO_IP, IP_MINTTL, &minttl, sizeof(minttl)); if (bind(s, rp->ai_addr, rp->ai_addrlen) == 0) break ... Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2010 12 次提交
-
-
由 David S. Miller 提交于
This way GSO packets don't get handled differently. With help from Eric Dumazet. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
-
由 Eric Dumazet 提交于
If some skb are queued to our backlog, we are delaying IPI sending at the end of net_rx_action(), increasing latencies. This defeats the queueing, since we want to quickly dispatch packets to the pool of worker cpus, then eventually deeply process our packets. It's better to send IPI before processing our packets in upper layers, from process_backlog(). Change the _and_disable_irq suffix to _and_enable_irq(), since we enable local irq in net_rps_action(), sorry for the confusion. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not used" compile warning. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Use the correct direction of byte-swapping function to fix a mistake shown by sparse endianness checking -- c.fl0id is __be16. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Eric's recent patch added __force, but this place would seem to require actually doing a byte order conversion so the printk is consistent across architectures. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
At this point, skb->destructor is not the original one (stored in DEV_GSO_CB(skb)->destructor) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Klein 提交于
Force serialization of userspace-triggered DLPAR/mem operations Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Klein 提交于
Reset a port's resources only if they're actually in an error state Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Röjfors 提交于
This patch adds platform data to the ks8842 driver. Via the platform data a MAC address, to be used by the controller, can be passed. To ensure this MAC address is used, the MAC address is written after each hardware reset. Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikanth Karthikesan 提交于
Remove the always true #if 1. Also the unecessary re-test of ei_local->irqlock and the unreachable printk format string. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
kill_fasync() uses a central rwlock, candidate for RCU conversion, to avoid cache line ping pongs on SMP. fasync_remove_entry() and fasync_add_entry() can disable IRQS on a short section instead during whole list scan. Use a spinlock per fasync_struct to synchronize kill_fasync_rcu() and fasync_{remove|add}_entry(). This spinlock is IRQ safe, so sock_fasync() doesnt need its own implementation and can use fasync_helper(), to reduce code size and complexity. We can remove __kill_fasync() direct use in net/socket.c, and rename it to kill_fasync_rcu(). Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we only get the checksum right for data-less TCP responses. Noticed by Herbert Xu. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2010 16 次提交
-
-
由 David S. Miller 提交于
Commit 6651ffc8 ("ipv6: Fix tcp_v6_send_response transport header setting.") fixed one half of why ipv6 tcp response checksums were invalid, but it's not the whole story. If we're going to use CHECKSUM_PARTIAL for these things (which we are since commit 2e8e18ef "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"), we can't be setting buff->csum as we always have been here in tcp_v6_send_response. We need to leave it at zero. Kill that line and checksums are good again. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c net/core/dev.c
-
由 David Howells 提交于
Fix the following RCU warning in dev_pick_tx(): =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/core/dev.c:1993 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by swapper/0: #0: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff81039e65>] run_timer_softirq+0x17b/0x278 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff812ea3eb>] dev_queue_xmit+0x14e/0x4dc stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.34-rc5-cachefs #4 Call Trace: <IRQ> [<ffffffff810516c4>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff812ea4f6>] dev_queue_xmit+0x259/0x4dc [<ffffffff812ea3eb>] ? dev_queue_xmit+0x14e/0x4dc [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81035362>] ? local_bh_enable_ip+0xbc/0xc1 [<ffffffff812f0954>] neigh_resolve_output+0x24b/0x27c [<ffffffff8134f673>] ip6_output_finish+0x7c/0xb4 [<ffffffff81350c34>] ip6_output2+0x256/0x261 [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff813517fb>] ip6_output+0xbbc/0xbcb [<ffffffff8135bc5d>] ? fib6_force_start_gc+0x2b/0x2d [<ffffffff81368acb>] mld_sendpack+0x273/0x39d [<ffffffff81368858>] ? mld_sendpack+0x0/0x39d [<ffffffff81052099>] ? mark_held_locks+0x52/0x70 [<ffffffff813692fc>] mld_ifc_timer_expire+0x24f/0x288 [<ffffffff81039ed6>] run_timer_softirq+0x1ec/0x278 [<ffffffff81039e65>] ? run_timer_softirq+0x17b/0x278 [<ffffffff813690ad>] ? mld_ifc_timer_expire+0x0/0x288 [<ffffffff81035531>] ? __do_softirq+0x69/0x140 [<ffffffff8103556a>] __do_softirq+0xa2/0x140 [<ffffffff81002e0c>] call_softirq+0x1c/0x28 [<ffffffff81004b54>] do_softirq+0x38/0x80 [<ffffffff81034f06>] irq_exit+0x45/0x47 [<ffffffff810177c3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff810028d3>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810488dd>] ? __atomic_notifier_call_chain+0x0/0x86 [<ffffffff810096bf>] ? mwait_idle+0x6e/0x78 [<ffffffff810096b6>] ? mwait_idle+0x65/0x78 [<ffffffff810011cb>] cpu_idle+0x4d/0x83 [<ffffffff81380b05>] rest_init+0xb9/0xc0 [<ffffffff81380a4c>] ? rest_init+0x0/0xc0 [<ffffffff8168dcf0>] start_kernel+0x392/0x39d [<ffffffff8168d2a3>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff8168d38b>] x86_64_start_kernel+0xe4/0xeb An rcu_dereference() should be an rcu_dereference_bh(). Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Herbert Xu 提交于
My recent patch to remove the open-coded checksum sequence in tcp_v6_send_response broke it as we did not set the transport header pointer on the new packet. Actually, there is code there trying to set the transport header properly, but it sets it for the wrong skb ('skb' instead of 'buff'). This bug was introduced by commit a8fdf2b3 ("ipv6: Fix tcp_v6_send_response(): it didn't set skb transport header") Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
There is no need to export skb_under_panic() and skb_over_panic() in skbuff.c, since these methods are used only in skbuff.c ; this patch removes these two exports. It also marks these functions as 'static' and removeS the extern declarations of them from include/linux/skbuff.h Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
grec_nsrcs is in network order, we should convert to host horder in br_multicast_igmp3_report() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This was merely an oversight when I added the *_gro_receive() calls. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This was merely an oversight when I added the napi_gro_receive() calls. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert __DQUOT_PARANOIA symbol to standard config option
-
由 Jan Kara 提交于
Make __DQUOT_PARANOIA define from the old days a standard config option and turn it off by default. This gets rid of a quota warning about writes before quota is turned on for systems with ext4 root filesystem. Currently there's no way to legally solve this because /etc/mtab has to be written before quota is turned on on most systems. Signed-off-by: NJan Kara <jack@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix error handling in cm4000_cs.c drivers/pcmcia: Add missing local_irq_restore serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33) pcmcia: avoid late calls to pccard_validate_cis pcmcia: fix ioport size calculation in rsrc_nonstatic pcmcia: re-start on MFC override pcmcia: fix io_probe due to parent (PCI) resources pcmcia: use previously assigned IRQ for all card functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix hardirq tracing in trap return path. sparc64: Use correct pt_regs in decode_access_size() error paths. sparc64: Fix PREEMPT_ACTIVE value. sparc64: Run NMIs on the hardirq stack. sparc64: Allocate sufficient stack space in ftrace stubs. sparc: Fix forgotten kmemleak headers inclusion
-