The newly added support for Buzz controller

- introduced Kconfig selection of LEDS_CLASS
- introduced conditional preprocessor checking for CONFIG_LEDS_CLASS

This has multiple problems -- namely select doesn't work transitively,
so it shouldn't be used. On the other hand the code assumed that LEDS_CLASS
is enabled in some places, but not everywhere.

Put LEDS_CLASS as a Kconfig dependency for hid-sony and remove all the
CONFIG_LEDS_CLASS conditionals from hid-sony.

Reported-by: fengguang.wu@intel.com
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for PS2/3 Buzz controllers into hid-sony

It has been tested on Debian 7 with kernel version 3.10.0-rc2. Unfortunately
I can't test the patch with a regular six-axis controller myself.
Signed-off-by: NColin Leitner <colin.leitner@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 2353f2be ("HID: protect hid_debug_list") introduced mutex
locking around debug_list access to prevent SMP races when debugfs
nodes are being operated upon by multiple userspace processess.

mutex is not a proper synchronization primitive though, as the hid-debug
callbacks are being called from atomic contexts.

We also have to be careful about disabling IRQs when taking the lock
to prevent deadlock against IRQ handlers.

Benjamin reports this has also been reported in RH bugzilla as bug #958935.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.9.0+ #94 Not tainted
 -------------------------------
 include/linux/rcupdate.h:476 Illegal context switch in RCU read-side critical section!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by Xorg/5502:
  #0:  (&evdev->mutex){+.+...}, at: [<ffffffff81512c3d>] evdev_write+0x6d/0x160
  #1:  (&(&dev->event_lock)->rlock#2){-.-...}, at: [<ffffffff8150dd9b>] input_inject_event+0x5b/0x230
  #2:  (rcu_read_lock){.+.+..}, at: [<ffffffff8150dd82>] input_inject_event+0x42/0x230
  #3:  (&(&usbhid->lock)->rlock){-.....}, at: [<ffffffff81565289>] usb_hidinput_input_event+0x89/0x120

 stack backtrace:
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  0000000000000001 ffff8800689c7c38 ffffffff816f249f ffff8800689c7c68
  ffffffff810acb1d 0000000000000000 ffffffff81a03ac7 000000000000019d
  0000000000000000 ffff8800689c7c90 ffffffff8107cda7 0000000000000000
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff810acb1d>] lockdep_rcu_suspicious+0xfd/0x130
  [<ffffffff8107cda7>] __might_sleep+0xc7/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
 BUG: sleeping function called from invalid context at kernel/mutex.c:413
 in_atomic(): 1, irqs_disabled(): 1, pid: 5502, name: Xorg
 INFO: lockdep is turned off.
 irq event stamp: 1098574
 hardirqs last  enabled at (1098573): [<ffffffff816fb53f>] _raw_spin_unlock_irqrestore+0x3f/0x70
 hardirqs last disabled at (1098574): [<ffffffff816faaf5>] _raw_spin_lock_irqsave+0x25/0xa0
 softirqs last  enabled at (1098306): [<ffffffff8104971f>] __do_softirq+0x18f/0x3c0
 softirqs last disabled at (1097867): [<ffffffff81049ad5>] irq_exit+0xa5/0xb0
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  ffffffff81a03ac7 ffff8800689c7c68 ffffffff816f249f ffff8800689c7c90
  ffffffff8107ce60 0000000000000000 ffff8800689c7fd8 ffff88006a62c800
  ffff8800689c7d10 ffffffff816f7770 ffff8800689c7d00 ffffffff81312ac4
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff8107ce60>] __might_sleep+0x180/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fixes 'undefined reference' issue when hid-steelseries is built in,
but led-class is a module.
--
drivers/built-in.o: In function `steelseries_srws1_remove':
hid-steelseries.c:(.text+0x3b97a1): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `steelseries_srws1_probe':
hid-steelseries.c:(.text+0x3b9c51): undefined reference to `led_classdev_register'
hid-steelseries.c:(.text+0x3b9ce5): undefined reference to `led_classdev_register'
hid-steelseries.c:(.text+0x3b9d4b): undefined reference to `led_classdev_unregister'
--

Patch allows LED control when led-class is built in, or both hid-steelseries
_and_ led-class are both modules.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

It looks like the manual merge 0d69a3c7 ("Merge
branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally
removed Sony RF receiver with USB product id 0x0374 from the "have special
driver" list, effectively nullifying a4649184
("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the
device back to the list.

Cc: stable@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Accesses to hid_device->hid_debug_list are not serialized properly, which
could result in SMP concurrency issues when HID debugfs events are accessesed
by multiple userspace processess.

Serialize all the list operations by a mutex.

Spotted by Al Viro.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

No semantic changes, but hid_dump_report should be in hid-debug.c, not
in hid-core.c
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patche adds PID of Japanese Natual Ergonomic Keyboard 4000. HID
NE4K driver depends on this PID for determining its quirks. F14-F18 keys
would not work without the patch.
Signed-off-by: NAdam Jiang <jiang.adam@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

It has been reported that there is a new version (different USB rev)
of the Logitech DFGT in the 'wild'.

This patch allows the kernel to recognise this wheel and send it the
command to enter native mode.
Reported-by: N"Denis Jovic" <djovic78@gmail.com>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

from is u16 which never < 0.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Magic Mouse driver also supports the Magic Trackpad, so mention it
in the KConfig description for the driver.
Signed-off-by: NDavid King <amigadave@amigadave.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This driver was originally written by James McKenzie, updated by
Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend
support added.
I ported it to the HID subsystem, in order to simplify it a litle
and allow lirc to use it through hiddev.

More recent versions of the IR receiver are also supported through
a patch by Alex Karpenko. The patch also adds support for the 2nd
and 5th generation of the controller, and the menu key on newer
brushed metal remotes.
Tested-by: NFabien André <fabien.andre@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Kone now reports media key events through it's chardev to userspace.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In pointer_press_speed_show, we do
    data_pointer = hid_get_drvdata(hdev);
twice in a row. Remove one of those.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

With the current i2c hid driver set/get report does not work
as expected, for e.g sensor hub properties like power state,
frequency etc is not set properly on the device as a result
we do not get events.
The problem is that i2c hid driver in function i2c_hid_request
sets length equal to default buffer size for which the sensor
hub does not respond on get/set commands. Use report length
and calculate it based on report size and id.
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NHuzefa Kankroliwala <huzefa.nomanx.kankroliwala@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since kernel 3.7, it appears that the input registration occured before
the end of magicmouse_setup_input(). This is shown by receiving a lot of
"EV_SYN SYN_REPORT 1" instead of normal "EV_SYN SYN_REPORT 0".
This value means that the output buffer is full, and the user space
is loosing events.

Using .input_configured guarantees that the race is not occuring, and that
the call of "input_set_events_per_packet(input, 60)" is taken into account
by input_register().

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=908604

Cc: stable@vger.kernel.org
Reported-and-Tested-By: NClarke Wixon <cwixon@usa.net>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

It turns out the Wii accepts any status reports from clients reduced to
"BB BB" key data only, as long as the report actually includes key data at
the first two bytes.

The official devices don't send these reduced reports, but of course, 3rd
party devices make great use of this feature.

Hence, add parsers for these reduced reports for every matching report.
Also change the logic how we find handlers. There is no reason to call
multiple handlers on a single report, but instead find the best handler
and call it only once.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This adds the 2nd generation Wii Remote IDs. They have a different
Bluetooth chipset (CSR instead of Broadcom) and are more restrictive in
what they accept as input. Hence, you need up-to-date BlueZ and
Bluetooth HIDP modules to use these devices.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Battery device names must be unique, otherwise registration fails if
multiple Wii Remotes are connected.

This breaks the sysfs API, but there is no known application that uses the
Wii Remote battery that I know of so we should go ahead and apply this.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch reverts commit 0322bd39 ("usb hid quirks for Masterkit MA901 usb
radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device.
This usb radio device shares USB ID with many Atmel V-USB (and probably other)
devices so patch sorts things out by checking name, vendor, product of hid device.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit "HID: multitouch: use the callback "report" instead..." breaks the
buttons of touchpads following the HID multitouch specification.
The buttons were emmitted through hid-input, but as now the events
are generated only in hid-multitouch, the buttons are not emmitted anymore.

The input_event() call is far much simpler than the hid-input one as
many of the different tests do not apply to multitouch touchpads.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The "tablet" udev rule relies on BTN_STYLUS to be set.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is not just cosmetics, it can help to write udev and X.org
rules.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Dual sensors devices reports pen and touch on two different reports.
Using the quirk HID_QUIRK_MULTI_INPUT allows us to create a new input
device to forward pen events.

The quirk HID_QUIRK_NO_EMPTY_INPUT avoids the creation of input devices
for the not used mouse emulation present on Win7 certified devices.

Since hid-multitouch sets the quirk HID_QUIRK_NO_INPUT_SYNC, we need
to manually send SYN events for pen report too.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

To implement different methods for pen and touch, the previous
implementation has to be reworked.

This detection of the input attached to the touch sensor is the same
than the one used in mt_report().
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid-multitouch only handles touch events, so there is no point in
mapping other kind of events.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This will allow easier integration of hybrid pen and touch devices.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is no need to register an input device containing no events.
This allows drivers using the quirk MULTI_INPUT to register one input
per report effectively used.

For backward compatibility, we need to add a quirk to request
this behavior.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let the system sleep go ahead further, so this
patch doesn't recover device under this situation, otherwise
may cause resume() confused.
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix build problem caused by typo introduced by 620ae90e
("HID: usbhid: quirk for MSI GX680R led panel").

Reported-by: fengguang.wu@intel.com
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This keyboard backlight device causes a 10 second delay to boot.  Add it
to the quirk list with HID_QUIRK_NO_INIT_REPORTS.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=907221

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

Cc: stable@vger.kernel.org
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

module_hid_driver() makes the code simpler by eliminating
boilerplate code..
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fixed parameter documentation.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Extending isku module with one additional and one changed sysfs attr. IskuFX has
larger light sysfs attr. Made the code size tolerant so both devices can be
handled.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Userland-tools can already be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid_output_raw_report() makes a direct call to usb_control_msg(). However,
some USB3 boards have shown that the usb device is not ready during the
.probe(). This blocks the entire usb device, and the paired mice, keyboards
are not functional. The dmesg output is the following:

[   11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[   11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[   11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32

Relying on the scheduled call to usbhid_submit_report() fixes the problem.

related bugs:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072082
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1039143
https://bugzilla.redhat.com/show_bug.cgi?id=840391
https://bugzilla.kernel.org/show_bug.cgi?id=49781Reported-and-tested-by: NBob Bowles <bobjohnbowles@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid-multitouch used to direclty call for a set_idle in the .resume()
callback. With the new hid_hw_idle(), this can be dropped and
hid-multitouch is now freed from its transport layer.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some drivers send the idle command directly to underlying device,
creating an unwanted dependency on the underlying transport layer.
This patch adds hid_hw_idle() to the interface, thereby removing
usbhid from the lion share of the drivers.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>