Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 10月, 2014 1 次提交
  3. 30 10月, 2014 1 次提交
    • E
      net: ipv6: Add a sysctl to make optimistic addresses useful candidates · 7fd2561e
      由 Erik Kline 提交于 
      Add a sysctl that causes an interface's optimistic addresses
to be considered equivalent to other non-deprecated addresses
for source address selection purposes.  Preferred addresses
will still take precedence over optimistic addresses, subject
to other ranking in the source address selection algorithm.

This is useful where different interfaces are connected to
different networks from different ISPs (e.g., a cell network
and a home wifi network).

The current behaviour complies with RFC 3484/6724, and it
makes sense if the host has only one interface, or has
multiple interfaces on the same network (same or cooperating
administrative domain(s), but not in the multiple distinct
networks case.

For example, if a mobile device has an IPv6 address on an LTE
network and then connects to IPv6-enabled wifi, while the wifi
IPv6 address is undergoing DAD, IPv6 connections will try use
the wifi default route with the LTE IPv6 address, and will get
stuck until they time out.

Also, because optimistic nodes can receive frames, issue
an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC
flag appropriately set).  A second RTM_NEWADDR is sent if DAD
completes (the address flags have changed), otherwise an
RTM_DELADDR is sent.

Also: add an entry in ip-sysctl.txt for optimistic_dad.
Signed-off-by: NErik Kline <ek@google.com>
Acked-by: NLorenzo Colitti <lorenzo@google.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7fd2561e
  5. 28 10月, 2014 2 次提交
  7. 24 10月, 2014 4 次提交
  9. 23 10月, 2014 2 次提交
  11. 21 10月, 2014 1 次提交
    • F
      net: gso: use feature flag argument in all protocol gso handlers · 1e16aa3d
      由 Florian Westphal 提交于 
      skb_gso_segment() has a 'features' argument representing offload features
available to the output path.

A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use
those instead of the provided ones when handing encapsulation/tunnels.

Depending on dev->hw_enc_features of the output device skb_gso_segment() can
then return NULL even when the caller has disabled all GSO feature bits,
as segmentation of inner header thinks device will take care of segmentation.

This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs
that did not fit the remaining token quota as the segmentation does not work
when device supports corresponding hw offload capabilities.

Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1e16aa3d
  13. 19 10月, 2014 2 次提交
  15. 18 10月, 2014 1 次提交
  17. 15 10月, 2014 1 次提交
  19. 14 10月, 2014 1 次提交
    • P
      netfilter: nf_tables: restrict nat/masq expressions to nat chain type · 7210e4e3
      由 Pablo Neira Ayuso 提交于 
      This adds the missing validation code to avoid the use of nat/masq from
non-nat chains. The validation assumes two possible configuration
scenarios:

1) Use of nat from base chain that is not of nat type. Reject this
   configuration from the nft_*_init() path of the expression.

2) Use of nat from non-base chain. In this case, we have to wait until
   the non-base chain is referenced by at least one base chain via
   jump/goto. This is resolved from the nft_*_validate() path which is
   called from nf_tables_check_loops().

The user gets an -EOPNOTSUPP in both cases.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      7210e4e3
  21. 11 10月, 2014 1 次提交
  23. 08 10月, 2014 2 次提交
    • D
      ipv6: Do not warn for informational ICMP messages, regardless of type. · ea85a0a2
      由 David S. Miller 提交于 
      There is no reason to emit a log message for these.

Based upon a suggestion from Hannes Frederic Sowa.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
      ea85a0a2
    • E
      net: better IFF_XMIT_DST_RELEASE support · 02875878
      由 Eric Dumazet 提交于 
      Testing xmit_more support with netperf and connected UDP sockets,
I found strange dst refcount false sharing.

Current handling of IFF_XMIT_DST_RELEASE is not optimal.

Dropping dst in validate_xmit_skb() is certainly too late in case
packet was queued by cpu X but dequeued by cpu Y

The logical point to take care of drop/force is in __dev_queue_xmit()
before even taking qdisc lock.

As Julian Anastasov pointed out, need for skb_dst() might come from some
packet schedulers or classifiers.

This patch adds new helper to cleanly express needs of various drivers
or qdiscs/classifiers.

Drivers that need skb_dst() in their ndo_start_xmit() should call
following helper in their setup instead of the prior :

	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
->
	netif_keep_dst(dev);

Instead of using a single bit, we use two bits, one being
eventually rebuilt in bonding/team drivers.

The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being
rebuilt in bonding/team. Eventually, we could add something
smarter later.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      02875878
  25. 07 10月, 2014 5 次提交
  27. 05 10月, 2014 1 次提交
  29. 04 10月, 2014 1 次提交
    • T
      fou: eliminate IPv4,v6 specific GRO functions · efc98d08
      由 Tom Herbert 提交于 
      This patch removes fou[46]_gro_receive and fou[46]_gro_complete
functions. The v4 or v6 variants were chosen for the UDP offloads
based on the address family of the socket this is not necessary
or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb.
This is set in udp6_gro_receive and unset in udp4_gro_receive. In
fou_gro_receive the value is used to select the correct inet_offloads
for the protocol of the outer IP header.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      efc98d08
  31. 03 10月, 2014 3 次提交
  33. 02 10月, 2014 3 次提交
    • T
      gre: Set inner protocol in v4 and v6 GRE transmit · 54bc9bac
      由 Tom Herbert 提交于 
      Call skb_set_inner_protocol to set inner Ethernet protocol to
protocol being encapsulation by GRE before tunnel_xmit. This is
needed for GSO if UDP encapsulation (fou) is being done.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      54bc9bac
    • T
      sit: Set inner IP protocol in sit · 469471cd
      由 Tom Herbert 提交于 
      Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV6
before tunnel_xmit. This is needed if UDP encapsulation (fou) is
being done.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      469471cd
    • T
      udp: Generalize skb_udp_segment · 8bce6d7d
      由 Tom Herbert 提交于 
      skb_udp_segment is the function called from udp4_ufo_fragment to
segment a UDP tunnel packet. This function currently assumes
segmentation is transparent Ethernet bridging (i.e. VXLAN
encapsulation). This patch generalizes the function to
operate on either Ethertype or IP protocol.

The inner_protocol field must be set to the protocol of the inner
header. This can now be either an Ethertype or an IP protocol
(in a union). A new flag in the skbuff indicates which type is
effective. skb_set_inner_protocol and skb_set_inner_ipproto
helper functions were added to set the inner_protocol. These
functions are called from the point where the tunnel encapsulation
is occuring.

When skb_udp_tunnel_segment is called, the function to segment the
inner packet is selected based on the inner IP or Ethertype. In the
case of an IP protocol encapsulation, the function is derived from
inet[6]_offloads. In the case of Ethertype, skb->protocol is
set to the inner_protocol and skb_mac_gso_segment is called. (GRE
currently does this, but it might be possible to lookup the protocol
in offload_base and call the appropriate segmenation function
directly).
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8bce6d7d
  35. 01 10月, 2014 1 次提交
    • H
      ipv6: remove rt6i_genid · 705f1c86
      由 Hannes Frederic Sowa 提交于 
      Eric Dumazet noticed that all no-nonexthop or no-gateway routes which
are already marked DST_HOST (e.g. input routes routes) will always be
invalidated during sk_dst_check. Thus per-socket dst caching absolutely
had no effect and early demuxing had no effect.

Thus this patch removes rt6i_genid: fn_sernum already gets modified during
add operations, so we only must ensure we mutate fn_sernum during ipv6
address remove operations. This is a fairly cost extensive operations,
but address removal should not happen that often. Also our mtu update
functions do the same and we heard no complains so far. xfrm policy
changes also cause a call into fib6_flush_trees. Also plug a hole in
rt6_info (no cacheline changes).

I verified via tracing that this change has effect.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      705f1c86
  37. 29 9月, 2014 5 次提交
  39. 28 9月, 2014 1 次提交
  41. 27 9月, 2014 1 次提交