- 22 9月, 2005 8 次提交
-
-
由 Benjamin Herrenschmidt 提交于
zImage.vmode was recently added. It's a version of zImage in which the ELF note section used by open firmware indicates that it requires a virtual mode instance of OF instead of real mode. This allows it to work with Apple OF, and thus is directly bootable (or netbootable) from OF command line. (Unfortunately, pSeries OF sort-of requires real mode and Apple OF sort-of requires virtual mode, and both tend to be unhappy if no notes section specifies the mode at all). However, we forgot to add zImage.vmode to the default G5 build. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
This function was removed a while ago, but crept in again via a recent scsi merge. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
The new version of the flattened device tree passes the boot cpuid in the header instead of via a linux,boot-cpu property. We need to update the in kernel OF parsing code to do this, otherwise machines with a non zero boot cpuid fail to come up. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch fixes the problem Bjorn reported. The busy_initializing flag should have cleared before going into the for loop. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olof Johansson 提交于
Some RS64 systems (such as F80) have non-python host bridges with EADS. However, they have two EADS with 4 buses each under them, so the old logic that assumed no more than 7 busses per PHB failed miserably. Big thanks to Olaf Hering for helping me test this, he's got one of the few machines that broke from the previous logic. Also, to be a bit smarter at detecting the need for a PHB-level IOMMU table by checking for the presence of an ISA bus. Only PHBs with ISA bridges should need the PHB-level table. Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
ia64's sched_clock() accesses per-cpu data which isn't set up at boot time. Hence ia64 cannot use printk timestamping, because printk() will crash in sched_clock(). So make printk() use printk_clock(), defaulting to sched_clock(), overrideable by the architecture via attribute(weak). Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sripathi Kodi 提交于
When the main thread of a thread group has done pthread_exit() and died, the other threads are still happily running, but will not be visible under /proc because their leader is no longer accessible. This fixes the access control so that we can see the sub-threads again. Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Acked-by: NAl Viro <viro@ftp.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
My code to set up the PCI tree from the Open Firmware device tree was setting IORESOURCE_* flags on the resources for the devices, but not the PCI_BASE_ADDRESS_* flags. This meant that some drivers misbehaved, and /proc/pci showed the wrong types for the resources. This fixes it. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 9月, 2005 13 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Christopher Zimmermann 提交于
From: Christopher Zimmermann <madroach@zakweb.de> This patch enables SBus support for the cs4231 sound driver. It is tested on an Ultra2. Capture and playback both work. I experienced lags and crashes using certain threaded players like ogg123 and mp3blaster, while the former is lagging far more. This behavior may be specific to SMP systems. It is reproducable using the dummy sound card driver. Sox works flawlessly. Setting up the calculation of ptr in snd_cs4231_playback_pointer was a bit strange. I got it to work by not incrementing the [pc]_periods_sent counter when starting DMA the first time in cs4231_dma_trigger. Therefore this dummy thing. [ I did some minor cleanups -DaveM ] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom 'spot' Callaway 提交于
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Patch from Joel Sing to fix the default congestion control algorithm for incoming connections. If a new congestion control handler is added (via module), it should become the default for new connections. Instead, the incoming connections use reno. The cause is incorrect initialisation causes the tcp_init_congestion_control() function to return after the initial if test fails. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Acked-by: NIan McDonald <imcdnzl@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Cleanup the printk's in fib_trie: * Convert a couple of places in the dump code to BUG_ON * Put log level's on each message The version message really needed the message since it leaks out on the pretty Fedora bootup. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Acked-by: Robert Olsson <Robert.Olsson@data.slu.se>, Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
The convention is that longer addresses will simply extend the hardeware address byte arrays at the end of sockaddr_ll and packet_mreq. In making this change a small information leak was also closed. The code only initializes the hardware address bytes that are used, but all of struct sockaddr_ll was copied to userspace. Now we just copy sockaddr_ll to the last byte of the hardware address used. For error checking larger structures than our internal maximums continue to be allowed but an error is signaled if we can not fit the hardware address into our internal structure. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Antonino A. Daplas 提交于
In fbdev perspective, the frontporch is the lower/right margin and the backporch is the upper/left margin. Correct. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
A recent change in nvidiafb caused nvidiafb_cursor to always return -ENXIO instead of using the soft_cursor. This will happen if the parameter "hwcur" is not set, which happens to be the default. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Clean up QP table array on device removal. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
ipoib_mcast_restart_task() is always called from within the single-threaded IPoIB workqueue, so flushing the workqueue from within the function can lead to a recursion overflow. But since we're running in a single-threaded workqueue, we're already synchronized against other items in the workqueue, so just get rid of the flush in ipoib_mcast_restart_task(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 20 9月, 2005 19 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Anton Altaparmakov 提交于
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
-
由 David S. Miller 提交于
This showed that arch/sparc64/kernel/ptrace.c was not getting the define properly, and thus the code protected by this ifdef was never actually compiled before. So fix that too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Avast, ye scurvy land-lubbers! Time to try out a new release. Arrr!
-
由 Ed L. Cashin 提交于
This patch comments the fact that although passing le64_to_cpup et al. is within the intended use of the byteorder macros, using get_unaligned is the recommended way to go. Signed-off-by: NEd L. Cashin <ecashin@coraid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Because we use byte loads/stores to cons up the value in and out of registers, we can't expect the ASI endianness setting to take care of this for us. So do it by hand. This case is triggered by drivers/block/aoe/aoecmd.c in the ataid_complete() function where it goes: /* word 100: number lba48 sectors */ ssize = le64_to_cpup((__le64 *) &id[100<<1]); This &id[100<<1] address is 4 byte, rather than 8 byte aligned, thus triggering the unaligned exception. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Checking i_nlink is dubious, but the alternatives look even less appetizing. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Mark J Cox 提交于
Fix unchecked __get_user that could be tricked into generating a memory read on an arbitrary address. The result of the read is not returned directly but you may be able to divine some information about it, or use the read to cause a crash on some architectures by reading hardware state. CAN-2004-2492. Fix from Al Viro, ack from Dave Miller. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Herbert Xu 提交于
The problem is that we're now calling tcp_fragment() in a context where the packets might be marked as SACKED_ACKED or SACKED_RETRANS. This was not possible before as you never retransmitted packets that are so marked. Because of this, we need to adjust sacked_out and retrans_out in tcp_fragment(). This is exactly what the following patch does. We also need to preserve the SACKED_ACKED/SACKED_RETRANS marking if they exist. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krzysztof Halasa 提交于
The following commit breaks cisco mode with my WAN drivers: author David S. Miller <davem@davemloft.net> Tue, 28 Jun 2005 22:25:31 +0000 (15:25 -0700) commit 689be439 "[NET]: Remove gratuitous use of skb->tail in network drivers." The following patch fixes it - please apply (cisco_hard_header does skb_push(4 bytes)). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
Those exports are needed by the PPTP helper following in the next couple of changes. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Both __ip_conntrack_expect_find and ip_conntrack_expect_find_get take a reference to the expectation, the difference is that callers of __ip_conntrack_expect_find must hold ip_conntrack_lock. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
Some IPv6 matches have very similar loops to find IPv6 extension header and we can unify them. This patch introduces ipv6_find_hdr() to do it. I just checked that it can find the target headers in the packet which has dst,hbh,rt,frag,ah,esp headers. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
This new "version 3" PPTP conntrack/nat helper is finally ready for mainline inclusion. Special thanks to lots of last-minute bugfixing by Patric McHardy. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Olsson 提交于
* This patch is from Paul McKenney's RCU reviewing. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Olsson 提交于
* Prints the route tnode and set the stats level deepth as before. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-