- 27 10月, 2014 11 次提交
-
-
由 Alexander Aring 提交于
This patch moves the stats increment of successful transmitted packets in the right place when the skb was really successful transmitted. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch replace the pr_foo printout function to netdev_foo printout function. Inside the xmit handling, the interface is already known. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch holds rtnl lock while sync xmit inside of workqueue. Otherwise we could down the interface while worker xmit handling. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch renames the existsing xmit callback to xmit_sync and introduces an asynchronous xmit_async function. If ieee802154_ops doesn't provide the xmit_async callback, then we have a fallback to the xmit_sync callback. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
In case of an error we should call kfree_skb instead of consume_skb which is called by ieee802154_xmit_complete function. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch uses the queue utility helpers inside the xmit worker of mac802154 subsystem. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes the channel hopping feature before xmit. There are several issues to provide a real channel hopping (timing requirements, etc...). We don't have any known kernelspace protocol which really use this feature. And I don't know an real user of this feature. We simply drop this feature now. This patch removes also the hold of pib lock which isn't needed by any real driver xmit callback implementation. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch introduce some new stack variables to avoid multiple dereferencing inside the xmit worker function. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes the kmalloc allocation for workqueue data. This patch replaces the kmalloc and uses the control block of skb. The control block has enough space and isn't use by any other layer in this case. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the netdev xmit callback functions into the tx.c file. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 26 10月, 2014 7 次提交
-
-
由 Alexander Aring 提交于
Small rename to use the name workqueue than dev_workqueue. To bring the same naming convention like wireless into 802.15.4. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch replace the mac802154_to_priv macro with a static inline function named hw_to_local. This brings a similar naming convention like mac80211 stack. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch renamens the slaves attribute in sdata to interfaces and slaves_mtx to iflist_mtx. This is similar like the mac80211 stack naming convention. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Like wireless this structure should named ieee802154_sub_if_data and not mac802154_sub_if_data. This patch renames the struct and variables to sdata instead priv sometimes. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch rename the mac802154_priv to ieee802154_local. The mac802154_priv structure is like ieee80211_local and so we name it ieee802154_local. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
The wpan-phy header contains the wpan_phy struct information. Later this header will be have similar function like cfg80211 header. The cfg80211 header contains the wiphy struct which is identically the wpan_phy struct inside 802.15.4 subsystem. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch moves the mac802154.h internal header to ieee802154_i.h like the wireless stack ieee80211_i.h file. This avoids confusing with the not internal header include/net/mac802154.h header. Additional we get the same naming conversion like mac80211 for this file. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 25 10月, 2014 1 次提交
-
-
由 Alexander Aring 提交于
This patch removes the FSF address in files which belongs to ieee802154 and mac802154. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 14 8月, 2014 1 次提交
-
-
由 Varka Bhadram 提交于
This patch introduce the common error path on failure of Tx by inserting the label 'err_tx'. Signed-off-by: NVarka Bhadram <varkab@cdac.in> Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 08 7月, 2014 1 次提交
-
-
由 Varka Bhadram 提交于
This patch fixed the coding style issues reported by checkpatch.pl following issues fixed: CHECK: Alignment should match open parenthesis WARNING: line over 80 characters CHECK: Blank lines aren't necessary before a close brace '}' WARNING: networking block comments don't use an empty /* line, use /* Comment... WARNING: Missing a blank line after declarations WARNING: networking block comments start with * on subsequent lines CHECK: braces {} should be used on all arms of this statement Signed-off-by: NVarka Bhadram <varkab@cdac.in> Tested-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 4月, 2013 1 次提交
-
-
由 Alan Ott 提交于
Two sections checked whether the current channel != the new channel without ever setting the current channel variables. 1. net/mac802154/tx.c: Prevent set_channel() from getting called every time a packet is sent. 2. net/mac802154/mib.c: Lock (pib_lock) accesses to current_channel and current_page and make sure they are updated when the channel has been changed. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2013 2 次提交
-
-
由 Alan Ott 提交于
Use netif_stop_queue() and netif_wake_queue() to control the flow of packets to mac802154 devices. Since many IEEE 802.15.4 devices have no output buffer, and since the mac802154 xmit() function is designed to block, netif_stop_queue() is called after each packet. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Ott 提交于
When ops->xmit() fails, drop the packet. Devices which support hardware ack and retry (which include all devices currently supported by mainline), will automatically retry sending the packet (in the hardware) up to 3 times, per the 802.15.4 spec. There is no need, and it is incorrect to try to do it in mac802154. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2012 2 次提交
-
-
由 Alan Ott 提交于
kfree_skb() indicates failure, which is where this is being used. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Ott 提交于
kfree_skb() was not getting called in the case of some failures. This was pointed out by Eric Dumazet. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 1 次提交
-
-
Add monitor receive callback to the TX datapath to catch all the data sent to transceivers. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2012 1 次提交
-
-
Add missed braces after 'if' operator. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 1 次提交
-
-
Main TX data path implementation between upper and physical layers. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-