- 13 12月, 2008 13 次提交
-
-
由 Sujith 提交于
The proper rate table wouldn't be used if a disassoc happens and a new attempt is made to associate using wpa_supplicant. This patch fixes it by storing the rate table to be used on association. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
It looks like there are some issues in the current ath9k version as far as staggered Beacon frame scheduling is concerned. This results in Beacon frame timestamp being off by 25 milliseconds or so which can cause issues with multicast power save buffering in AP mode. Some client stations fail to receive multicast frames when there is this large an offset between TBTT and actual Beacon transmission time. Since ath9k does not yet support multiple BSSes anyway, the staggered Beacon frame scheduling is just increasing the number of interrupts at this point. The easiest fix for the timestamp offset is to disable staggered Beacon frames for now. We need to redesign beacon.c anyway when adding multi-BSS support with mac80211 since the existing code depends on different mechanism for Beacon frame transmission. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Fix a memory leak where AP mode did not free transmitted Beacon frame skbs. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NPat Erley <pat-lkml@erley.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patches removes unused variable (pm_state) from iwl-dev.h and from iwl-3945.h. (wireless-testing tree) Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu, Yi 提交于
This patch protects iwlwifi indirect mmio operations with rmb() and wmb(). It makes sure CPU reordering won't affect our indirect mmio access. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu, Yi 提交于
The patch merges implementation of iwl_poll_bit() and iwl_poll_direct_bit() by letting the latter be a special case of the former. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu, Yi 提交于
This patch fixes the misue of CSR_GP_CNTRL with CSR_RESET address in polling the CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY bit in iwl4965_apm_reset(). This causes "MAC in deep sleep" error sometimes. The patch also fixes the timeout value and the iwl_poll_bit() return value check. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu, Yi 提交于
The patch fixes the misuse of microsecond with millisecond in the polling mechanism of the iwlwifi driver. The impact of this problem is the unacceptable latency for the whole system (especially during bringing down the wlan interface). Signed-off-by: NZhu Yi <yi.zhu@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abbas, Mohamed 提交于
This patch make sure we use only CCK rate for B only network. For 3945 driver, it sets REPLY_RATE_SCALE command every time we connect to a new network. In this command we set for every rate the number of try and next rate. The problem mac80211 reports same mode for both B and G mode as IEEE80211_BAND_2GHZ which will cause using invalid rate other than CCK in B only network. THis patch on association will examine sta valid rate on association, if no OFDM rate in valid available rates it considers it as B only mode so we can set REPLY_RATE_SCALE command with valid B only network and only choose CCK rate in rate scaling. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Halperin, Daniel C 提交于
The old version of this code was copied from 3945 and never updated. This patch cleans up structs that do not apply and accounts for other changes from 3945->iwlagn (e.g., PHY info can come in a separate cmd response from the ucode.) Signed-off-by: NDaniel Halperin <daniel.c.halperin@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
ieee80211_hw_config can return an error when the hardware has rfkill enabled. A WARN_ON() is too harsh for this failure as it is a valid scenario. Only comment this warning as we would like to have it back when rfkill is integrated into mac80211. Also reintroduce propagation of error if ieee80211_hw_config fails in ieee80211_config_beacon. This patch partially reverts patch: 5f0387fc3337ca26f0745f945f550f0c3734960f "mac80211: clean up ieee80211_hw_config errors" Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Senthil Balasubramanian 提交于
This patch fixes a regression introduced by "wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts" LEAP authentication algorithm identifier should be 128. Signed-off-by: NSenthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The current wireless statistics for the RTL8187 poorly indicate the signal strength and quality. With testing, I found that the AGC value is inversely correlated with the strength as in the RTL8187B. By implementing a similar calculation, much more code becomes common to the two devices. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Tested by: Martín Ernesto Barreyro <barreyromartin@gmail.com> Acked-by: NHin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 12月, 2008 4 次提交
-
-
由 Daniel Silverstone 提交于
Implements the KS8695 ethernet device (ks8695net). This driver is only of use on the KS8695 which is an ARM9 based SoC. The documentation on this SoC is sparse and poor, with barely a register description and a rough outline of how the ethernet works, this driver was therefore written with strong reference to the Micrel supplied Linux 2.6.9 port, and to Andrew Victor's ks8695eth driver. Signed-off-by: NDaniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: NVincent Sanders <vince@simtec.co.uk> Acked-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atsushi Nemoto 提交于
The chip can strip CRC automatically on receiving. Enable it. Also fix potential RX_BUF_SIZE calculation bug which was obscured by alignment. And use proper symbols (NET_IP_ALIGN, ETH_FCS_LEN, etc.) instead of magic numbers. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Glendinning 提交于
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Kirsher 提交于
Based on Peter Waskiewicz patch for ixgbe. Add error handling based on Hemminger's recommendation. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2008 12 次提交
-
-
由 Eric Leblond 提交于
The patch "don't call nf_log_packet in NFLOG module" make xt_NFLOG dependant of nfnetlink_log. This patch forces the dependencies to fix compilation in case only xt_NFLOG compilation was asked and modifies the help message accordingly to the change. Signed-off-by: NEric Leblond <eric@inl.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
This last patch makes the appropriate changes to use and propagate the network namespace where needed in IPv6 multicast forwarding code. This consists mainly in replacing all the remaining init_net occurences with current netns pointer retrieved from sockets, net devices or mfc6_caches depending on the routines' contexts. Some routines receive a new 'struct net' parameter to propagate the current netns: * ip6mr_get_route * ip6mr_cache_report * ip6mr_cache_find * ip6mr_cache_unresolved * mif6_add/mif6_delete * ip6mr_mfc_add/ip6mr_mfc_delete * ip6mr_reg_vif All the IPv6 multicast forwarding variables moved to struct netns_ipv6 by the previous patches are now referenced in the correct namespace. Changelog: ========== * Take into account the net associated to mfc6_cache when matching entries in mfc_unres_queue list. * Call mroute_clean_tables() in ip6mr_net_exit() to free memory allocated per-namespace. * Call dev_net_set() in ip6mr_reg_vif() to initialize dev->nd_net correctly. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Declare IPv6 multicast forwarding /proc/net entries per-namespace: /proc/net/ip6_mr_vif /proc/net/ip6_mr_cache Changelog ========= V2: * In routine ipmr_mfc_seq_idx(), only match entries belonging to current netns in mfc_unres_queue list. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare variable 'reg_vif_num' per-namespace, moves into struct netns_ipv6. At the moment, this variable is only referenced in init_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare IPv6 multicast forwarding variables 'mroute_do_assert' and 'mroute_do_pim' per-namespace in struct netns_ipv6. At the moment, these variables are only referenced in init_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare variable cache_resolve_queue_len per-namespace: moves it into struct netns_ipv6. This variable counts the number of unresolved cache entries queued in the list mfc_unres_queue. This list is kept global to all netns as the number of entries per namespace is limited to 10 (hardcoded in routine ip6mr_cache_unresolved). Entries belonging to different namespaces in mfc_unres_queue will be identified by matching the mfc_net member introduced previously in struct mfc6_cache. Keeping this list global to all netns, also allows us to keep a single timer (ipmr_expire_timer) to handle their expiration. In some places cache_resolve_queue_len value was tested for arming or deleting the timer. These tests were equivalent to testing mfc_unres_queue value instead and are replaced in this patch. At the moment, cache_resolve_queue_len is only referenced in init_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Dynamically allocates IPv6 multicast forwarding cache, mfc6_cache_array, and moves it to struct netns_ipv6. At the moment, mfc6_cache_array is only referenced in init_net. Replace 'ARRAY_SIZE(mfc6_cache_array)' with mfc6_cache_array size: MFC6_LINES. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
This patch stores into struct mfc6_cache the network namespace each mfc6_cache belongs to. The new member is mfc6_net. mfc6_net is assigned at cache allocation and doesn't change during the rest of the cache entry life. This will help to retrieve the current netns around the IPv6 multicast forwarding code. At the moment, all mfc6_cache are allocated in init_net. Changelog: ========== * Use write_pnet()/read_pnet() to set and get mfc6_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Dynamically allocates interface table vif6_table and moves it to struct netns_ipv6, and updates MIF_EXISTS() macro. At the moment, vif6_table is only referenced in init_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Thery 提交于
Preliminary work to make IPv6 multicast forwarding netns-aware. Make IPv6 multicast forwarding mroute6_socket per-namespace, moves it into struct netns_ipv6. At the moment, mroute6_socket is only referenced in init_net. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
Sparse asked whether these could be static. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Glendinning 提交于
Convert the driver to select 16-bit or 32-bit bus access at runtime, at a small performance cost. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2008 11 次提交
-
-
由 Peter P Waskiewicz Jr 提交于
This patch implements the PCIe Advanced Error Reporting callbacks in ixgbe. The 82598 hardware supports AER, so we enable it. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
When running in a virtual environment the ports of an 82575/6 can appear to be single function devices which is not correct. To resolve this we rely on the function number stored in the status register. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
As we begin to move into virtualization the use of a global value for buffer sizes becomes undesirable. This change makes it so only 256 and 512 byte buffers require use of the RCTL register. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
Turn all bond_parm_tbls const. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
bond_parse_parm() parses a parameter table for a particular value and is therefore not modifying the table at all. Therefore make the 2nd argument const, thus allowing to make the tables const later. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
Remove some declarations from bonding.c as they are declared in bonding.h already. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
Use pr_debug() instead of own macros. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
This is what I get if debug is enabled: drivers/net/bonding/bond_ipv6.c: In function 'bond_na_send': drivers/net/bonding/bond_ipv6.c:75: error: 'slave' undeclared (first use in this function) drivers/net/bonding/bond_ipv6.c:75: error: (Each undeclared identifier is reported only once drivers/net/bonding/bond_ipv6.c:75: error: for each function it appears in.) This patch fixes that. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Eitzenberger 提交于
Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
We can skip WARN_ON() in htb_dequeue_tree() because there should be always a similar warning from htb_lookup_leaf() earlier. The first WARN_ON() in in htb_lookup_leaf() is changed to BUG_ON() because most likly this should end with oops anyway. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-