Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.

Current rsnd_dma_of_path is assuming that all mods are related to DMA.
But it will be wrong. This patch tidyup this wrong assumption
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Renesas sound is supporting PIO fallback if it can't use DMA.
In such case, it should remove all attached modules, but current driver
is missing about CTU/MIX. Because current implement requests
specific mod for remove.
To avoid same things in future, this patch removes all mods,
and re-connects SSI when PIO fallback case.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.

DMAC/SSIU/SSI-parent/CMD will be implemented as module, but these are
not customer controlled module. These should be automatically install
to system. Because of this, rsnd_dai_connect() should be called from
each mod. SSI can be very special, because it will be installed as
SSI-parent / SSI-child. Thus, new rsnd_dai_connect() has type parameter
which should be mod->type except SSI-parent
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.

DMA will be implemented as module. Then each rsnd_dma_ops will be
rsnd_mod_ops. But current rsnd_dma_ops::init means "DMA attach".
This patch removes .init from rsnd_dma_ops, and renames
rsnd_dma_init() to rsnd_dma_attach()
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.

DMA will be implemented as module. Current DMA definition is no longer
needed on rsnd.h. Let's move it to dma.c
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.

Current rsnd_mod is member of rsnd_mod. But the DMA user is only
SSI/SRC. This DMA will be implemented as module. As 1st step, DMA
become SSI/SRC member by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

An spi_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Change them to #ifdef as CONFIG_PM_SLEEP might not be defined at all.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

So we have consistent order for register bit defines.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DW i2s controller's master/slave config can be read from a
read-only register. Machine driver can try to set a master/slave
format on cpu-dai using 'set_fmt' of dai ops. A check is added to
verify codec is master when dwc is slave and vice-versa.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The patch adds the HWEQ function for the speaker output. User can set the
HWEQ parameters using the ALSA binary control byte-by-byte. We use the
following struct array to store the HWEQ parameters for implementing as
simple as possible.
struct rt5645_eq_param_s {
	unsigned short reg;
	unsigned short val;
};
It supports the variant length of the HWEQ parameters that are required.
We add the validating function in the function "rt5645_hweq_put" of the
ALSA binary control to avoid the user that puts the invalid parameters.
In the HWEQ enable function of speaker event, we also add the validating
function to prevent that the invalid parameters are applied to codec.
The HWEQ parameters should be controlled by DAPM for a specific sequence,
so the parameters will be applied to the codec in the speaker power up
event of DAPM, and will be disabled in the speaker power down event of
DAPM.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some module pin connection are static and defined by the topology.
This patch adds support for static pin definitions in topology widget
private data
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If copier instance is connected to a DMA gateway then driver
needs to configure the gateway configuration otherwise set
it to invalid.
This patch sets the non gateway copier node value to invalid.
Signed-off-by: NDharageswari.R <dharageswari.r@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

If DSP initialization fails, ipc to disable notification
will cause NULL ptr exception as ipc is not initialized.
This patch returns error if dsp init fails before
sending disable notification ipc.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Each FW modules can report underrun/overrun notification from
all modules. This patch disables underrun/overrun notification after
firmware is loaded.
This will be supportted for debug mode only thru debugfs
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DSP firmware has interface change for SSP node index structure.
New FW interface removes the dual_mono field and adds 4 bits for
TDM slot group index. This patch updates the ssp dma to align with
the DSP firmware structure.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Currently params only for first copier widget identified in the
source/sink path is queried from NHLT. In the dapm route the
playback/capture widget may be connected to more than one copier
widget. This patch adds return check to return only for any error
case.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In case of playback, for the BE dai source path should be iterated to find
the pipe params. With sink path iterated, this resulted in a loop and kernel
panic with page request failure.
Similar are the cases for Capture and FE dais. Using correct macros to fix
the panic
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The BE copier private data allowed endpoint configuration blobs, now these
are queried from BIOS, we don't need to copy the blob, but only capability.

Removing the blob from private data will not allocate memory for module
specific config in which case memcpy will fail. Fix is to assign the ptr
queried from the NHLT table for the endpoint configuration.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

pm_runtime_get_sync() will return a negative value in case of
error and can return postive value for success.  The return check
for pm_runtime_get_sync() must be less than 0, so fix it
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The rate constraints in this driver are shared between all device
instances. It should not be (and is not) modified at runtime, so make them
const.

While we are at it also change the type of the rates array from u32 to
unsigned int. While both resolve to the same type, u32 is usually used to
empathize that the value is for a 32-bit hardware register or similar which
makes it slightly confusing in this context.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The rate constraints in this board driver are not modified at runtime, so
make them const.

While we are at it also remove the unnecessary 0 initializer for the mask
field.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

The rate constraints in this board driver are not modified at runtime, so
make them const.

While we are at it also remove the unnecessary 0 initializer for the mask
field.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

share lrck_tx to lrck_rx when symmetric_rates enabled.
Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

support max 8 channels capture, please add property
'rockchip,capture-channels' in dts to enable this,
if not, support 2 channels capture default.
Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add driver for the digital imput to PWM output stereo
class D amplifier. It comes with filter, digitally
controlled gain, an equalizer and a dmphase filter.
Signed-off-by: NSongjun Wu <songjun.wu@atmel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NJohn Lin <john.lin@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add AC'97 support to fsl-asoc-card using generic
ASoC AC'97 CODEC.

The SSI controller will silently enable any TX
AC'97 slots that have their bits set in SLOTREQ
received from CODEC and then will redirect some
of playback samples there.

That's why it is important to make sure that
any of CODEC playback slots that can pull samples
are set to slots 3/4 (standard PCM playback slots).
Currently, this applies to S/PDIF slots as they
were seen to pull samples sometimes even with
S/PDIF output being disabled.
Signed-off-by: NMaciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: NMark Brown <broonie@kernel.org>

The codec device properties are printed for debugging.
Signed-off-by: NBen Zhang <benzh@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_soc_codec_driver.set_pll is implemented to configure the FLL.
The codec internal SYSCLK can be from either the MCLK pin directly,
or the FLL. This is configured by snd_soc_codec_driver.set_pll.
Signed-off-by: NBen Zhang <benzh@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Given a kcontrol, we may want to access the parent widget
and it's associated data. So export function to return it.
Signed-off-by: NMythri P K <mythri.p.k@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For DAI link events, DSPs would like to get notified for startup
and shutdown event as well apart for existing hw_params. This
helps managing DSP resource allocation and freeup on these events
So add support for startup and shutdown for
snd_soc_dai_link_event()
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For DSPs we can define processing blocks as DAPM PGA widgets.
Some of these proceesing blocks can be configured by usermode
like EQ etc. So we need to add support of kcontrol for PGA
widgets.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NMythri P K <mythri.p.k@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In preparation for deprecating ioremap_cache() convert its usage in
skl-nhlt to memremap.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Currentlly, we use Synopsys DesignWare DMA Controller for
baytrail/haswell/broadwell ADSP firmware loading, but for
skylake, we don't use it, compiling sst-firmware.c may
introduce error when CONFIG_DW_DMAC_CORE is not enabled:

    sound/built-in.o: In function `sst_dma_new':
    (.text+0xd7b38): undefined reference to `dw_dma_probe'
    sound/built-in.o: In function `sst_dma_free':
    (.text+0xd7c0a): undefined reference to `dw_dma_remove'

Here we only compile sst-firmware when CONFIG_DW_DMAC_CORE
is selected, to fix the linking error issue.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We want these to be zero or one, but by mistake we also accept negative
values.  It's harmless but we should still clean it up.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Valid values for "deemph" are zero and one but we accidentally allow
negative values as well.  It's harmless but it causes static checker
warnings and we may as well clean it up.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Valid values for "deemph" are zero and one, but we mistakenly allow
negative values as well.  It's harmless but we may as well clean it up.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Valid values for "deemph" are zero and one, but we accidentally allow
negative values as well.  It's harmless, but static checkers complain
and we may as well clean it up.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>