Conglomerate from 4 separate patches from Joe.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Conglomerate of 4 separate patches by Joe.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch replaces automatic constant arrays a-la

    const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};

with static ones. Size difference for 32bit x86:

text  data   bss     dec     hex filename
5418   129     0    5547    15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o
5396   129     0    5525    1595 linux-2.6.followup-ALLYES/drivers/net/sb1000.o
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

drivers/net/sb1000.c has lots of inlined static functions.

Mst of them are used at initialization, wait for some
hardware register to change (wait using yield, sleep etc),
or do slow port-based I/O. Inlining thse "for speed" makes no sense.

This patch removes "inline" from biggest static function
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).

Size difference for 32bit x86:

text   data    bss    dec    hex filename
6299    129      0   6428   191c linux-2.6-ALLYES/drivers/net/sb1000.o
5418    129      0   5547   15ab linux-2.6.inline-ALLYES/drivers/net/sb1000.o
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch #if 0's the no longer used netxen_nic_link_ok().
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

netxen_workq can now become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Problem:     If setting of an ip-address fails with LAN_OFFLINE,
             qeth does not save the ip-address in its internal
             list of set ip-addresses. qeth recovers after a
             following STARTLAN event, but cannot set the unsaved
             ip-address.
Solution:    save the ip-address in the qeth-maintained list of
             ip-addresses after a LAN_OFFLINE failure for SETIP.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Allocate headroom for TR_HLEN but using only ETH_HLEN causes rx
performance degradation. Allocate ETH_HLEN for ethernet and
TR_HLEN for token ring (layer 3 mode).
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Improving debug message handling, moving ipa into messages from kernel
to dbf, some cleanups and typo fixes.
Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

hw does not allow to change the mac address.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Symptom:     slow CCL response time
Problem:     non-ETH_P_802_2 packets are not delivered to NDH for
             CCL. But CCL detects missing sequence numbers, which
             cause a serious performance problem with CCL.
Solution:    assign sequence numbers only to 802.2 packets.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Problem:     A STARTLAN command from the adapter may arrive while a
             qeth recovery is currently running with a failed qeth
             STARTLAN. Usually qeth schedules a recovery when
             receiving a STARTLAN command from the adapter. But
             another recovery scheduled while a recovery is already
             running never starts. Thus the qeth-administered
             lan_online flag remains zero in this scenario, even
             though the adapter-STARTLAN has happened.
Solution:    Set lan_online flag for a received STARTLAN from the
             adapter in case scheduled recovery does not start.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

OSA-adapters do not have an address limitation for the qdio queue
structures except the MAX storage level of the current processor.
And due to a recent z/VM APAR there is no longer a restriction to
allocate qdio structures below 2 GB.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

1. ip_list handling after deregister failure of multicast address:
   If error code "MC Address not found" is returned do not re-add
   multicast address to ip_list.
   For other error codes readd multicast address at the end of
   function qeth_delete_all_mc.
2. ip_list handling after deregister failure or normal ip address:
   If error code "IP Address not found" is returned do not re-add
   multicast address to ip list.
   This is especially important in IP address takeover scenarios,
   to enable re-takeover of a taken over IP address.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The register tests should be run with all the proper flags enabled
to maximize the test coverage code and make sure we are as close
as we can get to testing regular traffic.

Reformat the code for readability. Minor cleanups in the descriptor
ring setup.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Several minor cosmetic function renames.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

With multiple queues coming into the code these base control
registers need to be made into arrays.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use netdev_alloc_skb since it handles any NUMA node memory localtion issues
and sets skb->dev. Since device driver was not setting skb->dev, I bet
filter rules based on device would not work.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Any negative return value from start_xmit is interpreted as NETDEV_TX_LOCK
which is not what this driver wants. It should return 0 (NETDEV_TX_OK)
when it consumes a packet.

Also, use skb_padto() as the generic way to pad small frames.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Statistics structure is available for use in net_device structure.
Compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch works around the MWI bug on the DC21143 rev 65 Tulip by
ensuring that the receive buffers don't end on a cache line boundary
(as documented in the errata).

This patch is required for the MIPS based Cobalt Qube/RaQ as
supporting the extra PCI commands seems to reduce the chance of a hard
lockup between the Tulip and the PCI bridge.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

winbond-840 shares tulip.h with the tulip driver, because they share
many (but not all) of the same register definitions.

This is useful for the register definitions, but not helpful when it
comes to symbols that are shared among the tulip driver's C modules,
but not meant to be shared outside that one driver.

Thus, PKT_BUF_SZ is a symbol internal to tulip, but it was intruding
upon a similar symbol in winbond-840's namespace.  This was not a
problem as long as the two symbols had the same value, but upcoming
patches result in differing symbol values.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

bond_main.c already #includes <linux/seq_file.h>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Multi-line comments weren't all CodingStyle compliant
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Having the id field be an int was making more complex bus topologies
excessively difficult.  For now, just convert it to a string, and
change all instances of "bus->id = val" to
snprintf(id, MII_BUS_ID_LEN, "%x", val).
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Poll the completed TX frames in gfar_poll().  This prevents the tx
completion interrupt from interfering with processing of received
frames.

We also disable hardware rx coalescing when NAPI is enabled.
Signed-off-by: NDai Haruki <dai.haruki@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch revises the logging for link informations of spidernet.

  - The link down message is too verbose because auto-negotiation timeout
    occurs periodically while an ethernet cable is not connected.
  - We want to see the link result, and we think it should be displayed.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

In addition to the value of GHIINT0STS, spidernet interrupt handler
should check the values of GHIINT1STS/GHIINT2STS registers at the
beginning of spider_net_interrupt() so as not to drop error
interrupts.

GHIINT1STS/GHIINT2STS registers indicates some of erroneous conditions
in spidernet, and a few bits of GHIINT0STS register reflects these
conditions. But GHIINT0MSK masks these bits, so you should check these
conditions by reading GHIINT1STS/GHIINT2STS registers directly.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch changes spidernet interrupt masks.

 - unmask GDAINVAINT. There is an operation to do by spidernet
   interrupt handler.
 - mask some interrupts. There are no operations in the interrupt handler.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch extends the timeout for spidernet auto-negotiation.
Auto-negotiation often fails to finish in 2 seconds.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes initialization of "aneg_count" and "medium" fields in
spider_net_card to make spidernet driver correctly sets "link status".
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NJens Osterkamp <jens@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Cosmetic TAB/whitespace cleanups and some style cleanups.  No
functional changes.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Convert the tc35815 driver to use the generic PHY layer in
drivers/net/phy.  Also rename 'boardtype' to 'chiptype' which hould be
more appropriate.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use managed pci functions and kill unnecessary volatiles.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use netdev_priv() instead of dev->priv.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use print_mac() and DECLARE_MAC_BUF().
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use struct net_device_stats embedded in struct net_device.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Reviewed-by: NTzachi Perelstein <tzachi@marvell.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>

When there are multiple mv643xx_eth silicon blocks in the system,
don't print an initialisation message for each and every one of
them.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Reviewed-by: NTzachi Perelstein <tzachi@marvell.com>
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>