- 25 3月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 3月, 2011 8 次提交
-
-
由 Andy Adamson 提交于
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to the data server (as opposed to the MDS) and the data server WRITE is not NFS_FILE_SYNC. Only whole file layout support means that there is only one IOMODE_RW layout segment. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Tested-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Implement all the hooks created in the previous patches. This requires exporting quite a few functions and adding a few structure fields. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Any COMMIT compound directed to a data server needs to have the GETATTR calls suppressed. We here, make sure the field we are testing (data->lseg) is set and refcounted correctly. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
We create three major hooks for the pnfs code. pnfs_mark_request_commit() is called during writeback_done from nfs_mark_request_commit, which gives the driver an opportunity to claim it wants control over commiting a particular req. pnfs_choose_commit_list() is called from nfs_scan_list to choose which list a given req should be added to, based on where we intend to send it for COMMIT. It is up to the driver to have preallocated list headers for each destination it may need. pnfs_commit_list() is how the driver actually takes control, it is used instead of nfs_commit_list(). In order to pass information between the above functions, we create a union in nfs_page to hold a lseg (which is possible because the req is not on any list while in transition), and add some flags to indicate if we need to use the pnfs code. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Create a separate support function for later use by data server commit code. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Create a separate support function for later use by data server commit code. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Reorder nfs_commit_rpcsetup, preparing for a pnfs entry point. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Based on consensus reached in Feb 2011 interim IETF meeting regarding use of LAYOUTCOMMIT, it has been decided that a NFS_DATA_SYNC return from a WRITE to data server should not initiate a COMMIT. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 3月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
When one of the two waits in nfs_commit_inode() is interrupted, it returns a non-negative value, which causes nfs_wb_page() to think that the operation was successful causing it to busy-loop rather than exiting. It also causes nfs_file_fsync() to incorrectly report the file as being successfully committed to disk. This patch fixes both problems by ensuring that we return an error if the attempts to wait fail. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Trond Myklebust 提交于
If we're only doing a single write, and there are no other unstable writes being queued up, we might want to just flip to using a stable write RPC call. Reviewed-by: NNeilBrown <neilb@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 3月, 2011 10 次提交
-
-
由 Fred Isaman 提交于
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Allows the pnfs filelayout driver to write to the data servers. Note that COMMIT to data servers will be implemented in a future patch. To avoid improper behavior, for the moment any WRITE to a data server that would also require a COMMIT to the data server is sent NFS_FILE_SYNC. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@fieldses.org> Signed-off-by: NMike Sager <sager@netapp.com> Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
We grab the lseg sent in from the doio function and attach it to each struct nfs_write_data created. This is how the lseg will be sent to the layout driver. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Reorder nfs_write_rpcsetup, preparing for a pnfs entry point. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Move the pnfs_update_layout call location to nfs_pageio_do_add_request(). Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach it to each nfs_read_data so it can be sent to the layout driver. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Add a pg_test layout driver hook which is used to avoid coelescing I/O across layout stripes. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The return values are not used by any callers. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
I've been adding in more artificial delays in the NFSv4 commit and close codepaths to uncover races. The kernel I'm testing has the patch to close the race in __rpc_wait_for_completion_task that's in Trond's cthon2011 branch. The reproducer I've been using does this in a loop: mkdir("DIR"); fd = open("DIR/FILE", O_WRONLY|O_CREAT|O_EXCL, 0644); write(fd, "abcdefg", 7); close(fd); unlink("DIR/FILE"); rmdir("DIR"); The above reproducer shouldn't result in any silly-renaming. However, when I add a "msleep(100)" just after the nfs_commit_clear_lock call in nfs_commit_release, I can almost always force one to occur. If I can force it to occur with that, then it can happen without that delay given the right timing. nfs_commit_inode waits for the NFS_INO_COMMIT bit to clear when called with FLUSH_SYNC set. nfs_commit_rpcsetup on the other hand does not wait for the task to complete before putting its reference to it, so the last reference get put in rpc_release task and gets queued to a workqueue. In this situation, the last open context reference may be put by the COMMIT release instead of the close() syscall. The close() syscall returns too quickly and the unlink runs while the d_count is still high since the COMMIT release hasn't put its dentry reference yet. Fix this by having rpc_commit_rpcsetup wait for the RPC call to complete before putting the task reference when FLUSH_SYNC is set. With this, the last reference is put by the process that's initiating the FLUSH_SYNC commit and the race is closed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 1月, 2011 1 次提交
-
-
由 Fred Isaman 提交于
Cleanup of the allocated list entries should not call put_nfs_open_context() on each entry, as the context will always be NULL, causing an oops. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 12月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
When a nfs_page is freed, nfs_free_request is called which also calls nfs_clear_request to clean out the lock and open contexts and free the pagecache page. However, a couple of places in the nfs code call nfs_clear_request themselves. What happens here if the refcount on the request is still high? We'll be releasing contexts and freeing pointers while the request is possibly still in use. Remove those bare calls to nfs_clear_context. That should only be done when the request is being freed. Note that when doing this, we need to watch out for tests of req->wb_page. Previously, nfs_set_page_tag_locked() and nfs_clear_page_tag_locked() would check the value of req->wb_page to figure out if the page is mapped into the nfsi->nfs_page_tree. We now indicate the page is mapped using the new bit PG_MAPPED in req->wb_flags . Reported-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 10月, 2010 1 次提交
-
-
由 Wu Fengguang 提交于
This removes more dead code that was somehow missed by commit 0d99519e (writeback: remove unused nonblocking and congestion checks). There are no behavior change except for the removal of two entries from one of the ext4 tracing interface. The nonblocking checks in ->writepages are no longer used because the flusher now prefer to block on get_request_wait() than to skip inodes on IO congestion. The latter will lead to more seeky IO. The nonblocking checks in ->writepage are no longer used because it's redundant with the WB_SYNC_NONE check. We no long set ->nonblocking in VM page out and page migration, because a) it's effectively redundant with WB_SYNC_NONE in current code b) it's old semantic of "Don't get stuck on request queues" is mis-behavior: that would skip some dirty inodes on congestion and page out others, which is unfair in terms of LRU age. Inspired by Christoph Hellwig. Thanks! Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: David Howells <dhowells@redhat.com> Cc: Sage Weil <sage@newdream.net> Cc: Steve French <sfrench@samba.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 9月, 2010 1 次提交
-
-
由 Jeff Layton 提交于
WB_SYNC_NONE is supposed to mean "don't wait on anything". That should also include not waiting for COMMIT calls to complete. WB_SYNC_NONE is also implied when wbc->nonblocking and wbc->for_background are set, so we can replace those checks in nfs_commit_unstable_pages with a check for WB_SYNC_NONE. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 9月, 2010 1 次提交
-
-
由 Benny Halevy 提交于
Having to explicitly initialize sr_slotid to NFS4_MAX_SLOT_TABLE resulted in numerous bugs. Keeping the current slot as a pointer to the slot table is more straight forward and robust as it's implicitly set up to NULL wherever the seq_res member is initialized to zeroes. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 8月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
nfs_commit_inode() needs to be defined irrespectively of whether or not we are supporting NFSv3 and NFSv4. Allow the compiler to optimise away code in the NFSv2-only case by converting it into an inlined stub function. Reported-and-tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2010 3 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
See https://bugzilla.kernel.org/show_bug.cgi?id=16056 If other processes are blocked waiting for kswapd to free up some memory so that they can make progress, then we cannot allow kswapd to block on those processes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Trond Myklebust 提交于
This patch fixes bugzilla entry 14501: https://bugzilla.kernel.org/show_bug.cgi?id=14501Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 6月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
In anticipation of the day when we have per-filesystem sessions, and also in order to allow the session to change in the event of a filesystem migration event. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 5月, 2010 2 次提交
-
-
由 Trond Myklebust 提交于
J.R. Okajima reports that the call to sync_inode() in nfs_wb_page() can deadlock with other writeback flush calls. It boils down to the fact that we cannot ever call writeback_single_inode() while holding a page lock (even if we do set nr_to_write to zero) since another process may already be waiting in the call to do_writepages(), and so will deny us the I_SYNC lock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we exit from nfs_commit_inode() without ensuring that the COMMIT rpc call has been completed, we must re-mark the inode as dirty. Otherwise, future calls to sync_inode() with the WB_SYNC_ALL flag set will fail to ensure that the data is on the disk. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Neil Brown reports that he is seeing the BUG_ON(ret == 0) trigger in nfs_page_async_flush. According to the trace in https://bugzilla.novell.com/show_bug.cgi?id=599628 the problem appears to be due to nfs_wb_page() not waiting for the PG_writeback flag to clear. There is a ditto problem in nfs_wb_page_cancel() Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 4月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Commit 2c61be0a (NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible) exposed a race on file close. In order to ensure correct close-to-open behaviour, we want to wait for all outstanding background commit operations to complete. This patch adds an inode flag that indicates if a commit operation is under way, and provides a mechanism to allow ->write_inode() to wait for its completion if this is a data integrity flush. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 4月, 2010 3 次提交
-
-
由 Trond Myklebust 提交于
We always want to ensure that WRITE and COMMIT completes, whether or not the user presses ^C. Do this by making the call asynchronous, and allowing the user to do an interruptible wait for rpc_task completion. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch fixes a race which occurs due to the fact that we release the PG_writeback flag while still holding the nfs_page locked. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Since writeback_single_inode() checks the inode->i_state flags _before_ it flushes out the data, we need to ensure that the I_DIRTY_DATASYNC flag is already set. Otherwise we risk not seeing a call to write_inode(), which again means that we break fsync() et al... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 3月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-