Currently the slab allocators contain callbacks into the page allocator to
perform the draining of pagesets on remote nodes.  This requires SLUB to have
a whole subsystem in order to be compatible with SLAB.  Moving node draining
out of the slab allocators avoids a section of code in SLUB.

Move the node draining so that is is done when the vm statistics are updated.
At that point we are already touching all the cachelines with the pagesets of
a processor.

Add a expire counter there.  If we have to update per zone or global vm
statistics then assume that the pageset will require subsequent draining.

The expire counter will be decremented on each vm stats update pass until it
reaches zero.  Then we will drain one batch from the pageset.  The draining
will cause vm counter updates which will then cause another expiration until
the pcp is empty.  So we will drain a batch every 3 seconds.

Note that remote node draining is a somewhat esoteric feature that is required
on large NUMA systems because otherwise significant portions of system memory
can become trapped in pcp queues.  The number of pcp is determined by the
number of processors and nodes in a system.  A system with 4 processors and 2
nodes has 8 pcps which is okay.  But a system with 1024 processors and 512
nodes has 512k pcps with a high potential for large amount of memory being
caught in them.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make it configurable.  Code in mm makes the vm statistics intervals
independent from the cache reaper use that opportunity to make it
configurable.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmstat is currently using the cache reaper to periodically bring the
statistics up to date.  The cache reaper does only exists in SLUB as a way to
provide compatibility with SLAB.  This patch removes the vmstat calls from the
slab allocators and provides its own handling.

The advantage is also that we can use a different frequency for the updates.
Refreshing vm stats is a pretty fast job so we can run this every second and
stagger this by only one tick.  This will lead to some overlap in large
systems.  F.e a system running at 250 HZ with 1024 processors will have 4 vm
updates occurring at once.

However, the vm stats update only accesses per node information.  It is only
necessary to stagger the vm statistics updates per processor in each node.  Vm
counter updates occurring on distant nodes will not cause cacheline
contention.

We could implement an alternate approach that runs the first processor on each
node at the second and then each of the other processor on a node on a
subsequent tick.  That may be useful to keep a large amount of the second free
of timer activity.  Maybe the timer folks will have some feedback on this one?

[jirislaby@gmail.com: add missing break]
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since nonboot CPUs are now disabled after tasks and devices have been
frozen and the CPU hotplug infrastructure is used for this purpose, we need
special CPU hotplug notifications that will help the CPU-hotplug-aware
subsystems distinguish normal CPU hotplug events from CPU hotplug events
related to a system-wide suspend or resume operation in progress.  This
patch introduces such notifications and causes them to be used during
suspend and resume transitions.  It also changes all of the
CPU-hotplug-aware subsystems to take these notifications into consideration
(for now they are handled in the same way as the corresponding "normal"
ones).

[oleg@tv-sign.ru: cleanups]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's very common for file systems to need to zero part or all of a page,
the simplist way is just to use kmap_atomic() and memset().  There's
actually a library function in include/linux/highmem.h that does exactly
that, but it's confusingly named memclear_highpage_flush(), which is
descriptive of *how* it does the work rather than what the *purpose* is.
So this patchset renames the function to zero_user_page(), and calls it
from the various places that currently open code it.

This first patch introduces the new function call, and converts all the
core kernel callsites, both the open-coded ones and the old
memclear_highpage_flush() ones.  Following this patch is a series of
conversions for each file system individually, per AKPM, and finally a
patch deprecating the old call.  The diffstat below shows the entire
patchset.

[akpm@linux-foundation.org: fix a few things]
Signed-off-by: NNate Diller <nate.diller@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Shutdown the cache_reaper if the cpu is brought down and set the
cache_reap.func to NULL.  Otherwise hotplug shuts down the reaper for good.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Looks like this was forgotten when CPU_LOCK_[ACQUIRE|RELEASE] was
introduced.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Gautham Shenoy <ego@in.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Export a couple of core functions for AFS write support to use:

	find_get_pages_contig()
	find_get_pages_tag()
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When cpuset is configured, it breaks the strict hugetlb page reservation as
the accounting is done on a global variable.  Such reservation is
completely rubbish in the presence of cpuset because the reservation is not
checked against page availability for the current cpuset.  Application can
still potentially OOM'ed by kernel with lack of free htlb page in cpuset
that the task is in.  Attempt to enforce strict accounting with cpuset is
almost impossible (or too ugly) because cpuset is too fluid that task or
memory node can be dynamically moved between cpusets.

The change of semantics for shared hugetlb mapping with cpuset is
undesirable.  However, in order to preserve some of the semantics, we fall
back to check against current free page availability as a best attempt and
hopefully to minimize the impact of changing semantics that cpuset has on
hugetlb.
Signed-off-by: NKen Chen <kenchen@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The internal hugetlb resv_huge_pages variable can permanently leak nonzero
value in the error path of hugetlb page fault handler when hugetlb page is
used in combination of cpuset.  The leaked count can permanently trap N
number of hugetlb pages in unusable "reserved" state.

Steps to reproduce the bug:

  (1) create two cpuset, user1 and user2
  (2) reserve 50 htlb pages in cpuset user1
  (3) attempt to shmget/shmat 50 htlb page inside cpuset user2
  (4) kernel oom the user process in step 3
  (5) ipcrm the shm segment

At this point resv_huge_pages will have a count of 49, even though
there are no active hugetlbfs file nor hugetlb shared memory segment
in the system.  The leak is permanent and there is no recovery method
other than system reboot. The leaked count will hold up all future use
of that many htlb pages in all cpusets.

The culprit is that the error path of alloc_huge_page() did not
properly undo the change it made to resv_huge_page, causing
inconsistent state.
Signed-off-by: NKen Chen <kenchen@google.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Martin Bligh <mbligh@google.com>
Acked-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No "blank" (or "*") line is allowed between the function name and lines for
it parameter(s).

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases SLUB is creating uselessly slabs that are larger than
slub_max_order. Also the layout of some of the slabs was not satisfactory.

Go to an iterarive approach.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have information about how long an object existed and about the nodes and
cpus where the allocations and frees took place.  Add that information to the
tracking output in /sys/slab/xx/alloc_calls and /sys/slab/free_calls

This will then enable slabinfo to output nice reports like this:

  christoph@qirst:~/slub$ ./slabinfo kmalloc-128

  Slabcache: kmalloc-128           Aliases:  0 Order :  0

  Sizes (bytes)     Slabs              Debug                Memory
  ------------------------------------------------------------------------
  Object :     128  Total  :      12   Sanity Checks : On   Total:   49152
  SlabObj:     200  Full   :       7   Redzoning     : On   Used :   24832
  SlabSiz:    4096  Partial:       4   Poisoning     : On   Loss :   24320
  Loss   :      72  CpuSlab:       1   Tracking      : On   Lalig:   13968
  Align  :       8  Objects:      20   Tracing       : Off  Lpadd:    1152

  kmalloc-128 has no kmem_cache operations

  kmalloc-128: Kernel object allocation
  -----------------------------------------------------------------------
        6 param_sysfs_setup+0x71/0x130 age=284512/284512/284512 pid=1 nodes=0-1,3
       11 percpu_populate+0x39/0x80 age=283914/284428/284512 pid=1 nodes=0
       21 __register_chrdev_region+0x31/0x170 age=282896/284347/284473 pid=1-1705 nodes=0-2
        1 sys_inotify_init+0x76/0x1c0 age=283423 pid=1004 nodes=0
       19 as_get_io_context+0x32/0xd0 age=6/247567/283988 pid=1-11782 nodes=0,2
       10 ida_pre_get+0x4a/0x80 age=277666/283773/284526 pid=0-2177 nodes=0,2
       24 kobject_kset_add_dir+0x37/0xb0 age=282727/283860/284472 pid=1-1723 nodes=0-2
        1 acpi_ds_build_internal_buffer_obj+0xd3/0x11d age=284508 pid=1 nodes=0
       24 con_insert_unipair+0xd7/0x110 age=284438/284438/284438 pid=1 nodes=0,2
        1 uart_open+0x2d2/0x4b0 age=283896 pid=1 nodes=0
       26 dma_pool_create+0x73/0x1a0 age=282762/282833/282916 pid=1705-1723 nodes=0
        1 neigh_table_init_no_netlink+0xd2/0x210 age=284461 pid=1 nodes=0
        2 neigh_parms_alloc+0x2b/0xe0 age=284410/284411/284412 pid=1 nodes=2
        2 neigh_resolve_output+0x1e1/0x280 age=276289/276291/276293 pid=0-2443 nodes=0
        1 netlink_kernel_create+0x90/0x170 age=284472 pid=1 nodes=0
        4 xt_alloc_table_info+0x39/0xf0 age=283958/283958/283959 pid=1 nodes=1
        3 fn_hash_insert+0x473/0x720 age=277653/277661/277666 pid=2177-2185 nodes=0
        1 get_mtrr_state+0x285/0x2a0 age=284526 pid=0 nodes=0
        1 cacheinfo_cpu_callback+0x26d/0x3e0 age=284458 pid=1 nodes=0
       29 kernel_param_sysfs_setup+0x25/0x90 age=284511/284511/284512 pid=1 nodes=0-1,3
        5 process_zones+0x5e/0x170 age=284546/284546/284546 pid=0 nodes=0
        1 drm_core_init+0x48/0x160 age=284421 pid=1 nodes=2

  kmalloc-128: Kernel object freeing
  ------------------------------------------------------------------------
      163 <not-available> age=4295176847 pid=0 nodes=0-3
        1 __vunmap+0x6e/0xf0 age=282907 pid=1723 nodes=0
       28 free_as_io_context+0x12/0x90 age=9243/262197/283474 pid=42-11754 nodes=0
        1 acpi_get_object_info+0x1b7/0x1d4 age=284475 pid=1 nodes=0
        1 do_acpi_find_child+0x45/0x4e age=284475 pid=1 nodes=0

  NUMA nodes           :    0    1    2    3
  ------------------------------------------
  All slabs                 7    2    2    1
  Partial slabs             2    2    0    0
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_SLUB_DEBUG can be used to switch off the debugging and sysfs components
of SLUB.  Thus SLUB will be able to replace SLOB.  SLUB can arrange objects in
a denser way than SLOB and the code size should be minimal without debugging
and sysfs support.

Note that CONFIG_SLUB_DEBUG is materially different from CONFIG_SLAB_DEBUG.
CONFIG_SLAB_DEBUG is used to enable slab debugging in SLAB.  SLUB enables
debugging via a boot parameter.  SLUB debug code should always be present.

CONFIG_SLUB_DEBUG can be modified in the embedded config section.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the tracking definitions and the check_valid_pointer() function away from
the debugging related functions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trace in both slab_alloc and slab_free has a lot of common code.  Use a single
function for both.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaces the PageError() checking.  DebugSlab is clearer and allows for
future changes to the page bit used.  We also need it to support
CONFIG_SLUB_DEBUG.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the resiliency check into the SYSFS section after validate_slab that is
used by the resiliency check.  This will avoid a forward declaration.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Scanning of objects happens in a number of functions.  Consolidate that code.
DECLARE_BITMAP instead of coding the declaration for bitmaps.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update comments throughout SLUB to reflect the new developments.  Fix up
various awkward sentences.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Its only purpose was to bring some sort of symmetry to sysfs usage when
dealing with bootstrapping per cpu flushing.  Since we do not time out slabs
anymore we have no need to run finish_bootstrap even without sysfs.  Fold it
back into slab_sysfs_init and drop the initcall for the !SYFS case.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We really do not need all this gaga there.

ksize gives us all the information we need to figure out if the object can
cope with the new size.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We needlessly duplicate code. Also make check_valid_pointer inline.
Signed-off-by: NChristoph LAemter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If no redzoning is selected then we do not need padding before the next
object.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SLUB currently assumes that the cacheline size is static.  However, i386 f.e.
supports dynamic cache line size determination.

Use cache_line_size() instead of L1_CACHE_BYTES in the allocator.

That also explains the purpose of SLAB_HWCACHE_ALIGN.  So we will need to keep
that one around to allow dynamic aligning of objects depending on boot
determination of the cache line size.

[akpm@linux-foundation.org: need to define it before we use it]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This implements deferred IO support in fbdev.  Deferred IO is a way to delay
and repurpose IO.  This implementation is done using mm's page_mkwrite and
page_mkclean hooks in order to detect, delay and then rewrite IO.  This
functionality is used by hecubafb.

[adaplas]
This is useful for graphics hardware with no directly addressable/mappable
framebuffer. Implementing this will allow the "framebuffer" to be accesible
from user space via mmap().
Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Same story as with cat /proc/*/wchan race vs rmmod race, only
/proc/slab_allocators want more info than just symbol name.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove do_sync_file_range() and convert callers to just use
do_sync_mapping_range().
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves the die notifier handling to common code.  Previous
various architectures had exactly the same code for it.  Note that the new
code is compiled unconditionally, this should be understood as an appel to
the other architecture maintainer to implement support for it aswell (aka
sprinkling a notify_die or two in the proper place)

arm had a notifiy_die that did something totally different, I renamed it to
arm_notify_die as part of the patch and made it static to the file it's
declared and used at.  avr32 used to pass slightly less information through
this interface and I brought it into line with the other architectures.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix vmalloc_sync_all bustage]
[bryan.wu@analog.com: fix vmalloc_sync_all in nommu]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup: setting an outstanding error on a mapping was open coded too many
times.  Factor it out in mapping_set_error().
Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.

  sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
  at boot time, and kmalloc/vmalloc at hotplug time. If config
  memory hotplug is on, there are references of bootmem allocater(init text)
  from them (normal text). This is cause of section mismatch.

  Bootmem is called by many functions and it must be
  used only at boot time. I think __init of them should keep for
  section mismatch check. So, I would like to register sparse_index_alloc()
  and zone_wait_table_init() into white list.

  In addition, ia64's .machvec section is function table of some platform
  dependent code. It is mixture of .init.text and normal text. These
  reference of __init functions are valid too.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is to fix many section mismatches of code related to memory hotplug.
I checked compile with memory hotplug on/off on ia64 and x86-64 box.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: NAnton Altaparmakov <aia21@cam.ac.uk>
Acked-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two problems with the existing redzone implementation.

Firstly, it's causing misalignment of structures which contain a 64-bit
integer, such as netfilter's 'struct ipt_entry' -- causing netfilter
modules to fail to load because of the misalignment.  (In particular, the
first check in
net/ipv4/netfilter/ip_tables.c::check_entry_size_and_hooks())

On ppc32 and sparc32, amongst others, __alignof__(uint64_t) == 8.

With slab debugging, we use 32-bit redzones. And allocated slab objects
aren't sufficiently aligned to hold a structure containing a uint64_t.

By _just_ setting ARCH_KMALLOC_MINALIGN to __alignof__(u64) we'd disable
redzone checks on those architectures.  By using 64-bit redzones we avoid that
loss of debugging, and also fix the other problem while we're at it.

When investigating this, I noticed that on 64-bit platforms we're using a
32-bit value of RED_ACTIVE/RED_INACTIVE in the 64-bit memory location set
aside for the redzone.  Which means that the four bytes immediately before
or after the allocated object at 0x00,0x00,0x00,0x00 for LE and BE
machines, respectively.  Which is probably not the most useful choice of
poison value.

One way to fix both of those at once is just to switch to 64-bit
redzones in all cases.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The newly merged SLUB allocator patches had been generated before the
removal of "struct subsystem", and ended up applying fine, but wouldn't
build based on the current tree as a result.

Fix up that merge error - not that SLUB is likely really ready for
showtime yet, but at least I can fix the trivial stuff.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we can miss freeze_process()->signal_wake_up() in kswapd() if it
happens between try_to_freeze() and prepare_to_wait().  To prevent this
from happening we should check freezing(current) before calling schedule().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace direct invocations of SetPageNosave(), SetPageNosaveFree() etc.  with
calls to inline functions that can be changed in subsequent patches without
modifying the code calling them.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SLOB doesn't calculate correct page order when page size is not 4KB.  This
patch fixes it with using get_order() instead of find_order() which is SLOB
version of get_order().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no user remaining and I have never seen any use of that flag.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>