Including linux/tty.h 3 times is a little over the top - once will do.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Doing tiocmget was such fun we should do tiocmset as well for the same
reasons
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

renamed spi_driver variable to not be h/w specific
set driver name to use DRVNAME define
removed commented-out define
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The probe routine should call spi_setup() to configure
the SPI bus so it can properly communicate with the device.
E.g. the device operates in SPI mode 1.

Called spi_setup to configure SPI mode, max_speed_hz, and bpw
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Platforms containing the 6260 can run up to 25Mhz.

For these platforms set max_speed_hz to 25Mhz.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver should support 32bit SPI transfers. The boolean variable
only allowed 8/16.

Changed to support 8/16/32 for future enabling
of 32 bpw.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is a SPI protocol driver and has no DMA ops
associated with the device so the call will fail. Furthermore,
the DMA allocation made here will be used by the SPI
controller driver (parent dev) so it makes sense to
pass that device instead.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The port ops must be set AFTER calling port init as that function
zeroes the structure
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.

Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If tty_register_driver() failed then tty_driver is still alive.
Free it with put_tty_driver().
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If second request_irq() failed then the first IRQ must be freed in
error handling code.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Noted by Stephen Rothwell
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Prototype driver for the IFX6x60 series of SPI attached modems by Jim
Stanley and Russ Gorby
Signed-off-by: NRuss Gorby <richardx.r.gorby@intel.com>

[Some reworking and a major cleanup]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>