- 19 5月, 2008 32 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Currently the ASoC core configures the bias levels in the system using a callback on codecs and machines called 'dapm_event', passing it PCI style power levels as SNDRV_CTL_POWER_ constants. This is more obscure than it needs to be and has caused confusion to driver authors, especially given that DAPM is also performing power management. Address this by renaming the callback function to 'set_bias_level' and using constants explicitly representing the off, standby, pre-on and on states which DAPM transitions through. Also unexport the API for setting bias level: there are currently no in-tree users of this API other than the core itself and it is likely that the core would need to be extended to cater for any users. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
The overwhelming majority just say 'initial version' anyway. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Andreas Mohr 提交于
- figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jarkko Nikula 提交于
Use gpiolib since it is now available for OMAPs. Change also references to HW version RX44 to product name N810. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Graeme Gregory <graeme@openmoko.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Frank Mandarino <fmandarino@endrelia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
ASoC codecs and machine drivers that use DAPM routes all cut'n'paste a loop iterating over a null terminated array of routes. Factor out this into a bulk registration function, improving the error reporting for most users, and deprecate the old API to help out of tree users pick up the changes. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Graeme Gregory <graeme@openmoko.org> Cc: Frank Mandarino <fmandarino@endrelia.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Most SoC drivers cut'n'paste a loop iterating over an array to register their DAPM controls. Provide a function they can call instead. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Graeme Gregory <graeme@openmoko.org> Cc: Frank Mandarino <fmandarino@endrelia.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add a constraint for the period time so that there are less than ten seconds between interrupts so that ALSA does not assume that the device is dead. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Introduce symbols for the buffer/period size constraints so that their limits and relationships become clearer. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add suspend/resume support. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Move the setting of the output enable GPIO bit to a separate function. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Create separate functions for the code that initializes the hardware, as opposed to initializing internal driver state, so that they can be reused for resume support. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
When initializing the DAC volume registers, we can just use the generic volume update functions instead of setting the registers manually. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Save the written values of all CMI8788 and AC97 registers and of some of the DAC/ADC registers so that it is possible to restore the register state later. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The hack for dma_alloc_coherent() is no longer needed on 2.6.26 since the base code was improved. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Mack 提交于
This patch adds suport for Native Instruments new 'Guitar Rig Session I/O' audio hardware. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Jacobowitz 提交于
Enable VMASTER for VT1616 / VT1617A codec. Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Tim Niemeyer 提交于
Signed-off-by: NTim Niemeyer <reddog@mastersword.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Graeme Gregory 提交于
This adds a hook to read the power state of a DAPM widget, I use this in the gta02 driver to expose certain DAPM widgets in the mixer for ease of audio routing. Signed-off-by: NGraeme Gregory <graeme@openmoko.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Mack 提交于
This patch adds support for AIC3x GPIO lines. They can be configured for many possible functions as well as be driven manually. I also introduced i2c read functionality since the GPIO state register has to be read from hardware every time and can not be served from cache. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Mack 提交于
This patch cleans up the clocking setup for aic3x codecs. It drops the dividers table and determines the PLL control values programatically. Under certain conditions, the PLL is disabled entirely which could save some power. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 23 6月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
snd_assert() in save_mixer() and restore_mixer() in sb_mixer.c is just wrong. The debug code wasn't tested at all, obviously... Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 6月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
Check that model->control_filter is set before trying to call it. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 6月, 2008 1 次提交
-
-
由 Akio Idehara 提交于
I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: NAkio Idehara <zbe64533@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 6月, 2008 1 次提交
-
-
由 Jaroslav Franek 提交于
When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: NJaroslav Franek <jarin.franek@post.cz> Acked-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 6月, 2008 1 次提交
-
-
由 Tony Vroon 提交于
Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: NTony Vroon <tony@linx.net> Tested-by: NGuri <gurashka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 5月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-