Patch from Lennert Buytenhek

Analogous to the previous patch that allows ioremap() to use section
mappings, this patch allows ioremap() to use supersection mappings.
Original patch by Deepak Saxena.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch makes the iWMMXt context switch hook use the generic
thread notifier infrastructure that was recently merged in commit
d6551e88.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch adds support for the Cirrus Logic EDB9315A, an evaluation
board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host
ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA,
and LCD interfaces.

The EDB9315A is a low-cost version of the EDB9315, and has only 16M
of NOR flash, while the EDB9315 has 32M.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Martin Michlmayr

Some cosmetic changes to increase the consistency of the IOP Kconfig file.  Change some space into tabs and add a dot at the end of a help description.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Martin Michlmayr

Add a brief help description for ARCH_EP80219.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch makes OMAP MMC work again:

- Fix compile errors
- Do not ioremap base as it is already statically mapped
- Clean-up platform device handling
- Fix compile warnings
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

Update OMAP H2 defconfig and leave out hw random for now until
it's been updated.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

Fixes compilation errors on OMAP1. Patch from Timo Teras.
Signed-off-by: NTimo Teras <timo.teras@solidboot.com>
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Allow section mappings to be setup using ioremap() and torn down
with iounmap().  This requires additional support in the MM
context switch to ensure that mappings are properly synchronised
when mapped in.

Based an original implementation by Deepak Saxena, reworked and
ARMv6 support added by rmk.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid folk having to edit cpu-sa1110.c to select their RAM type;
instead, allow the SDRAM type to be selected via the kernel
command line.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On some CPUs, bit 4 of section mappings means "update the
cache when written to".  On others, this bit is required to
be one, and others it's required to be zero.  Finally, on
ARMv6 and above, setting it turns on "no execute" and prevents
speculative prefetches.

With all these combinations, no one value fits all CPUs, so we
have to pick a value depending on the CPU type, and the area
we're mapping.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Jrgen Schindele

This patch adds support for Trizeps4 SoM and ConXS-evalboard
from "Keith und Koep" This DIMM-module is based on PXA270.
Signed-off-by: NJrgen Schindele <linux@schindele.name>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream: (26 commits)
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ARM: OMAP: Add OMAP_TAG_CAMERA_SENSOR
  ARM: OMAP: Add initial 24xx suspend support
  ARM: OMAP: Update cpufreq support for 24xx
  ARM: OMAP: Add GPMC support for OMAP2
  ARM: OMAP: Fix DMA channel irq handling for omap24xx
  ARM: OMAP: OMAP2 DMA burst support
  ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1
  ARM: OMAP: Port dmtimers to OMAP2 and implement PWM support
  ARM: OMAP: Correct two bugs in arch/arm/mach-omap2/clock.c
  ARM: OMAP: Register the 24xx McSPI device
  ARM: OMAP: Add bitbank SPI driver for Innovator 1510 touchscreen
  ARM: OMAP: Aic23 alsa platform driver code for board-innovator
  ARM: OMAP: Fix GPIO IRQ mask handling
  ARM: OMAP: DMA transfer parameter configuration fix
  ...

Patch from Andrew Victor

This prepares the way for adding support for the new Atmel AT91SAM926x
processors.

Major changes:
- Rename time.c to at91rm9200_time.c
- Rename common.c to at91rm9200.c
- Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and
ARCH_AT91SAM9261 are dependent.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch adds support for the Cirrus Logic EDB9302, an evaluation
board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host
port, audio in/out, two serial ports and a 10/100 ethernet interface.

George Kashperko submitted the original patch, this patch is a rewrite
using the newer physmap platform driver.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The bootloader on the LogicPD PXA270 platform informs the kernel of
which type of TFT screen is connected via an lcd=$FOO kernel command
line parameter.

Before this patch, we ignored this parameter and just hardcoded the use
of the Sharp lq64d343 display kit.  This patch implement parsing of the
command line option, and chooses the right pxafb_mach_info to use (six
choices) based on this command line option.

Also fix the fb settings to correspond with those of the bootloader.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Most MMU-based CPUs have a restriction on the setting of the data cache
enable and mmu enable bits in the control register, whereby if the data
cache is enabled, the MMU must also be enabled.  Enabling the data
cache without the MMU is an invalid combination.

However, there are CPUs where the data cache can be enabled without the
MMU.

In order to allow these CPUs to take advantage of that, provide a
method whereby each proc-*.S file defines the control regsiter value
for use with nommu (with the MMU disabled.)  Later on, when we add
support for enabling the MMU on these devices, we can adjust the
"crval" macro to also enable the data cache for nommu.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The "id(wb)BRR" suffix reports which CPU debugging options were (or
were not) selected at kernel build time.  Rather than have every
proc-*.S file implement this, report the control register value,
from which this information can be deduced.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The recent vsnprintf() fix introduced an off-by-one, and it's now
possible to overrun the target buffer by one byte.

The "end" pointer points to past the end of the buffer, so if we
have to truncate the result, it needs to be done though "end[-1]".

[ This is just an alternate and simpler patch to one proposed by Andrew
  and Jeremy, who actually noticed the problem ]
Acked-by: NAndrew Morton <akpm@osdl.org>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] nommu: backtrace code must not reference a discarded section
  [ARM] nommu: Initial uCLinux support for MMU-based CPUs
  [ARM] nommu: prevent Xscale-based machines being selected
  [ARM] nommu: export flush_dcache_page()
  [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build
  [ARM] Remove TABLE_SIZE, and several unused function prototypes
  [ARM] nommu: Provide a simple flush_dcache_page implementation
  [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files
  [ARM] nommu: add stubs for ioremap and friends
  [ARM] nommu: avoid selecting TLB and CPU specific copy code
  [ARM] nommu: uaccess tweaks
  [ARM] nommu: adjust headers for !MMU ARM systems
  [ARM] nommu: we need the TLS register emulation for nommu mode

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3672/1: PXA: don't probe output GPIOs for interrupt
  [ARM] 3671/1: ep93xx: add cirrus logic edb9315 support
  [ARM] 3370/2: ep93xx: add crunch support
  [ARM] 3665/1: crunch: add ptrace support
  [ARM] 3664/1: crunch: add signal frame save/restore
  [ARM] 3663/1: fix resource->end off-by-one thinko during physmap conversion
  [ARM] 3662/1: ixp23xx: don't include asm/hardware.h in uncompress.h
  [ARM] 3660/1: Remove legacy defines
  [ARM] 3661/1: S3C2412: Fix compilation if CPU_S3C2410 only
  [ARM] 3658/1: S3C244X: Change usb-gadget name to s3c2440-usbgadget
  [ARM] Remove the __arch_* layer from uaccess.h

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Documentation/watchdog update
  [WATCHDOG] convert AT91RM9200 watchdog to platform driver
  [WATCHDOG] add WDIOC_GETTIMELEFT ioctl
  [WATCHDOG] Pre-Timeout flags

plist.h uses container_of, which is defined in kernel.h.
Include kernel.h in plist.h as the kernel.h include does not longer
happen automatically on all architectures.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds earlier initialization of spi_device.mode, as needed
on boards using nondefault chipselect polarity.  An example would be
ones using the RS5C348 RTC without an external signal inverter between
the RTC chipselect and the SPI controller.

Without this mechanism, the first setup() call for that chip would
wrongly enable chips, corrupting transfers to/from other chips sharing
that SPI bus.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: db9 - fix potential buffer overrun
  Input: atkbd - fix hardware autorepeat
  Input: wistron - add mapping for Wistron MS 2111

Remove the hard coded ROM region setups. Use Kconfig options to specify
these in a generic way for platorms that want them.

This builds on top of the other recent m68knommu linker script changes
to completely remove fixed board configurations.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use Kconfig options to setup the optional ROM region used on some
platforms. We used to define this in the linker script on a per
board basis. The configure options are more flexible and clean up
the linker script a lot.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68EZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68VZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68360/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The irqnode_t struct has moved to irqnode.h, need to include that
68360 ints.c.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix clobber list in uCsimm/uCdimm boot load helper asm.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conditionaly compile the 68328 romvec code based on the ROM configuration
being enabled.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the inline 68328 romvec section asm code into its own file.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean out the 68328serial driver:

. remove use of cli/sti
. fix usage of tty_* calls
. remove unused variables
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Create the 68328 romvec section in its own assembler file. It can be
compiled in when required.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64-SGI] fix prom revision checks in SN kernel
  [IA64] tiger_defconfig s/NR_CPUS=4/NR_CPUS=16/
  [IA64-SGI] - Pass OS logical cpu number to the SN prom (bios)
  [IA64] palinfo.c: s/register_cpu_notifier/register_hotcpu_notifier/

WARNING: "unset_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined!
WARNING: "set_nmi_callback" [arch/x86_64/oprofile/oprofile.ko] undefined!

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>