Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 4月, 2010 2 次提交
  3. 21 4月, 2010 1 次提交
    • V
      blkio: Fix blkio crash during rq stat update · 7f1dc8a2
      由 Vivek Goyal 提交于 
      blkio + cfq was crashing even when two sequential readers were put in two
separate cgroups (group_isolation=0).

The reason being that cfqq can migrate across groups based on its being
sync-noidle or not, it can happen that at request insertion time, cfqq
belonged to one cfqg and at request dispatch time, it belonged to root
group. In this case request stats per cgroup can go wrong and it also runs
into BUG_ON().

This patch implements rq stashing away a cfq group pointer and not relying
on cfqq->cfqg pointer alone for rq stat accounting.

[   65.163523] ------------[ cut here ]------------
[   65.164301] kernel BUG at block/blk-cgroup.c:117!
[   65.164301] invalid opcode: 0000 [#1] SMP
[   65.164301] last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/0000:60:00.1/host9/rport-9:0-0/target9:0:0/9:0:0:2/block/sde/stat
[   65.164301] CPU 1
[   65.164301] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[   65.164301]
[   65.164301] Pid: 4505, comm: fio Not tainted 2.6.34-rc4-blk-for-35 #34 0A98h/HP xw8600 Workstation
[   65.164301] RIP: 0010:[<ffffffff8121924f>]  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301] RSP: 0018:ffff8800ba5a79e8  EFLAGS: 00010046
[   65.164301] RAX: 0000000000000096 RBX: ffff8800bb268d60 RCX: 0000000000000000
[   65.164301] RDX: ffff8800bb268eb8 RSI: 0000000000000000 RDI: ffff8800bb268e00
[   65.164301] RBP: ffff8800ba5a7a08 R08: 0000000000000064 R09: 0000000000000001
[   65.164301] R10: 0000000000079640 R11: ffff8800a0bd5bf0 R12: ffff8800bab4af01
[   65.164301] R13: ffff8800bab4af00 R14: ffff8800bb1d8928 R15: 0000000000000000
[   65.164301] FS:  00007f18f75056f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[   65.164301] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   65.164301] CR2: 000000000040e7f0 CR3: 00000000ba52b000 CR4: 00000000000006e0
[   65.164301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   65.164301] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   65.164301] Process fio (pid: 4505, threadinfo ffff8800ba5a6000, task ffff8800ba45ae80)
[   65.164301] Stack:
[   65.164301]  ffff8800ba5a7a08 ffff8800ba722540 ffff8800bab4af68 ffff8800bab4af68
[   65.164301] <0> ffff8800ba5a7a38 ffffffff8121d814 ffff8800ba722540 ffff8800bab4af68
[   65.164301] <0> ffff8800ba722540 ffff8800a08f6800 ffff8800ba5a7a68 ffffffff8121d8ca
[   65.164301] Call Trace:
[   65.164301]  [<ffffffff8121d814>] cfq_remove_request+0xe4/0x116
[   65.164301]  [<ffffffff8121d8ca>] cfq_dispatch_insert+0x84/0xe1
[   65.164301]  [<ffffffff8121e833>] cfq_dispatch_requests+0x767/0x8e8
[   65.164301]  [<ffffffff8120e524>] ? submit_bio+0xc3/0xcc
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120ea8d>] blk_peek_request+0x191/0x1a7
[   65.164301]  [<ffffffffa000109c>] ? dm_get_live_table+0x44/0x4f [dm_mod]
[   65.164301]  [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120f600>] __generic_unplug_device+0x32/0x37
[   65.164301]  [<ffffffff8120f8a0>] generic_unplug_device+0x2e/0x3c
[   65.164301]  [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[   65.164301]  [<ffffffff8120b063>] blk_unplug+0x29/0x2d
[   65.164301]  [<ffffffff8120b079>] blk_backing_dev_unplug+0x12/0x14
[   65.164301]  [<ffffffff81108a82>] block_sync_page+0x35/0x39
[   65.164301]  [<ffffffff810ad64e>] sync_page+0x41/0x4a
[   65.164301]  [<ffffffff810ad665>] sync_page_killable+0xe/0x35
[   65.164301]  [<ffffffff81589027>] __wait_on_bit_lock+0x46/0x8f
[   65.164301]  [<ffffffff810ad52d>] __lock_page_killable+0x66/0x6d
[   65.164301]  [<ffffffff81055fd4>] ? wake_bit_function+0x0/0x33
[   65.164301]  [<ffffffff810ad560>] lock_page_killable+0x2c/0x2e
[   65.164301]  [<ffffffff810aebfd>] generic_file_aio_read+0x361/0x4f0
[   65.164301]  [<ffffffff810e906c>] do_sync_read+0xcb/0x108
[   65.164301]  [<ffffffff811e32a3>] ? security_file_permission+0x16/0x18
[   65.164301]  [<ffffffff810e96d3>] vfs_read+0xab/0x108
[   65.164301]  [<ffffffff810e97f0>] sys_read+0x4a/0x6e
[   65.164301]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[   65.164301] Code: 00 74 1c 48 8b 8b 60 01 00 00 48 85 c9 75 04 0f 0b eb fe 48 ff c9 48 89 8b 60 01 00 00 eb 1a 48 8b 8b 58 01 00 00 48 85 c9 75 04 <0f> 0b eb fe 48 ff c9 48 89 8b 58 01 00 00 45 84 e4 74 16 48 8b
[   65.164301] RIP  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301]  RSP <ffff8800ba5a79e8>
[   65.164301] ---[ end trace 1b2b828753032e68 ]---
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      7f1dc8a2
  5. 09 4月, 2010 1 次提交
    • D
      blkio: Changes to IO controller additional stats patches · 84c124da
      由 Divyesh Shah 提交于 
      that include some minor fixes and addresses all comments.

Changelog: (most based on Vivek Goyal's comments)
o renamed blkiocg_reset_write to blkiocg_reset_stats
o more clarification in the documentation on io_service_time and io_wait_time
o Initialize blkg->stats_lock
o rename io_add_stat to blkio_add_stat and declare it static
o use bool for direction and sync
o derive direction and sync info from existing rq methods
o use 12 for major:minor string length
o define io_service_time better to cover the NCQ case
o add a separate reset_stats interface
o make the indexed stats a 2d array to simplify macro and function pointer code
o blkio.time now exports in jiffies as before
o Added stats description in patch description and
  Documentation/cgroup/blkio-controller.txt
o Prefix all stats functions with blkio and make them static as applicable
o replace IO_TYPE_MAX with IO_TYPE_TOTAL
o Moved #define constant to top of blk-cgroup.c
o Pass dev_t around instead of char *
o Add note to documentation file about resetting stats
o use BLK_CGROUP_MODULE in addition to BLK_CGROUP config option in #ifdef
  statements
o Avoid struct request specific knowledge in blk-cgroup. blk-cgroup.h now has
  rq_direction() and rq_sync() functions which are used by CFQ and when using
  io-controller at a higher level, bio_* functions can be added.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      84c124da
  7. 02 4月, 2010 1 次提交
  9. 19 3月, 2010 1 次提交
  11. 15 3月, 2010 1 次提交
  13. 26 2月, 2010 4 次提交
  15. 23 2月, 2010 1 次提交
  17. 29 1月, 2010 1 次提交
    • A
      block: Added in stricter no merge semantics for block I/O · 488991e2
      由 Alan D. Brunelle 提交于 
      Updated 'nomerges' tunable to accept a value of '2' - indicating that _no_
merges at all are to be attempted (not even the simple one-hit cache).

The following table illustrates the additional benefit - 5 minute runs of
a random I/O load were applied to a dozen devices on a 16-way x86_64 system.

nomerges        Throughput      %System         Improvement (tput / %sys)
--------        ------------    -----------     -------------------------
0               12.45 MB/sec    0.669365609
1               12.50 MB/sec    0.641519199     0.40% / 2.71%
2               12.52 MB/sec    0.639849750     0.56% / 2.96%
Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      488991e2
  19. 11 1月, 2010 3 次提交
  21. 30 12月, 2009 1 次提交
  23. 29 12月, 2009 1 次提交
  25. 03 12月, 2009 1 次提交
    • M
      block: Allow devices to indicate whether discarded blocks are zeroed · 98262f27
      由 Martin K. Petersen 提交于 
      The discard ioctl is used by mkfs utilities to clear a block device
prior to putting metadata down.  However, not all devices return zeroed
blocks after a discard.  Some drives return stale data, potentially
containing old superblocks.  It is therefore important to know whether
discarded blocks are properly zeroed.

Both ATA and SCSI drives have configuration bits that indicate whether
zeroes are returned after a discard operation.  Implement a block level
interface that allows this information to be bubbled up the stack and
queried via a new block device ioctl.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      98262f27
  27. 26 11月, 2009 1 次提交
    • I
      block: add helpers to run flush_dcache_page() against a bio and a request's pages · 2d4dc890
      由 Ilya Loginov 提交于 
      Mtdblock driver doesn't call flush_dcache_page for pages in request.  So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases.  The patch fixes this.

The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op.  Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.

See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.
Signed-off-by: NIlya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      2d4dc890
  29. 10 11月, 2009 1 次提交
  31. 29 10月, 2009 1 次提交
  33. 05 10月, 2009 1 次提交
  35. 04 10月, 2009 1 次提交
  37. 03 10月, 2009 1 次提交
  39. 02 10月, 2009 4 次提交
    • C
      block: allow large discard requests · 67efc925
      由 Christoph Hellwig 提交于 
      Currently we set the bio size to the byte equivalent of the blocks to
be trimmed when submitting the initial DISCARD ioctl.  That means it
is subject to the max_hw_sectors limitation of the HBA which is
much lower than the size of a DISCARD request we can support.
Add a separate max_discard_sectors tunable to limit the size for discard
requests.

We limit the max discard request size in bytes to 32bit as that is the
limit for bio->bi_size.  This could be much larger if we had a way to pass
that information through the block layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      67efc925
    • C
      block: use normal I/O path for discard requests · c15227de
      由 Christoph Hellwig 提交于 
      prepare_discard_fn() was being called in a place where memory allocation
was effectively impossible.  This makes it inappropriate for all but
the most trivial translations of Linux's DISCARD operation to the block
command set.  Additionally adding a payload there makes the ownership
of the bio backing unclear as it's now allocated by the device driver
and not the submitter as usual.

It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether
the queue supports discard operations or not.  blkdev_issue_discard now
allocates a one-page, sector-length payload which is the right thing
for the common ATA and SCSI implementations.

The mtd implementation of prepare_discard_fn() is replaced with simply
checking for the request being a discard.

Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx>
which did the prepare_discard_fn but not the different payload allocation
yet.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      c15227de
    • C
      block: allow large discard requests · ca80650c
      由 Christoph Hellwig 提交于 
      Currently we set the bio size to the byte equivalent of the blocks to
be trimmed when submitting the initial DISCARD ioctl.  That means it
is subject to the max_hw_sectors limitation of the HBA which is
much lower than the size of a DISCARD request we can support.
Add a separate max_discard_sectors tunable to limit the size for discard
requests.

We limit the max discard request size in bytes to 32bit as that is the
limit for bio->bi_size.  This could be much larger if we had a way to pass
that information through the block layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      ca80650c
    • C
      block: use normal I/O path for discard requests · 1122a26f
      由 Christoph Hellwig 提交于 
      prepare_discard_fn() was being called in a place where memory allocation
was effectively impossible.  This makes it inappropriate for all but
the most trivial translations of Linux's DISCARD operation to the block
command set.  Additionally adding a payload there makes the ownership
of the bio backing unclear as it's now allocated by the device driver
and not the submitter as usual.

It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether
the queue supports discard operations or not.  blkdev_issue_discard now
allocates a one-page, sector-length payload which is the right thing
for the common ATA and SCSI implementations.

The mtd implementation of prepare_discard_fn() is replaced with simply
checking for the request being a discard.

Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx>
which did the prepare_discard_fn but not the different payload allocation
yet.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      1122a26f
  41. 14 9月, 2009 2 次提交
  43. 11 9月, 2009 5 次提交
    • J
      block: enable rq CPU completion affinity by default · 01e97f6b
      由 Jens Axboe 提交于 
      Test results here look good, and on big OLTP runs it has also shown
to significantly increase cycles attributed to the database and
cause a performance boost.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      01e97f6b
    • J
      block: improve queue_should_plug() by looking at IO depths · fb1e7538
      由 Jens Axboe 提交于 
      Instead of just checking whether this device uses block layer
tagging, we can improve the detection by looking at the maximum
queue depth it has reached. If that crosses 4, then deem it a
queuing device.

This is important on high IOPS devices, since plugging hurts
the performance there (it can be as much as 10-15% of the sys
time).
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      fb1e7538
    • J
      bio: first step in sanitizing the bio->bi_rw flag testing · 1f98a13f
      由 Jens Axboe 提交于 
      Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      1f98a13f
    • T
      block: implement mixed merge of different failfast requests · 80a761fd
      由 Tejun Heo 提交于 
      Failfast has characteristics from other attributes.  When issuing,
executing and successuflly completing requests, failfast doesn't make
any difference.  It only affects how a request is handled on failure.
Allowing requests with different failfast settings to be merged cause
normal IOs to fail prematurely while not allowing has performance
penalties as failfast is used for read aheads which are likely to be
located near in-flight or to-be-issued normal IOs.

This patch introduces the concept of 'mixed merge'.  A request is a
mixed merge if it is merge of segments which require different
handling on failure.  Currently the only mixable attributes are
failfast ones (or lack thereof).

When a bio with different failfast settings is added to an existing
request or requests of different failfast settings are merged, the
merged request is marked mixed.  Each bio carries failfast settings
and the request always tracks failfast state of the first bio.  When
the request fails, blk_rq_err_bytes() can be used to determine how
many bytes can be safely failed without crossing into an area which
requires further retrials.

This allows request merging regardless of failfast settings while
keeping the failure handling correct.

This patch only implements mixed merge but doesn't enable it.  The
next one will update SCSI to make use of mixed merge.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Niel Lambrechts <niel.lambrechts@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      80a761fd
    • T
      block: use the same failfast bits for bio and request · a82afdfc
      由 Tejun Heo 提交于 
      bio and request use the same set of failfast bits.  This patch makes
the following changes to simplify things.

* enumify BIO_RW* bits and reorder bits such that BIOS_RW_FAILFAST_*
  bits coincide with __REQ_FAILFAST_* bits.

* The above pushes BIO_RW_AHEAD out of sync with __REQ_FAILFAST_DEV
  but the matching is useless anyway.  init_request_from_bio() is
  responsible for setting FAILFAST bits on FS requests and non-FS
  requests never use BIO_RW_AHEAD.  Drop the code and comment from
  blk_rq_bio_prep().

* Define REQ_FAILFAST_MASK which is OR of all FAILFAST bits and
  simplify FAILFAST flags handling in init_request_from_bio().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      a82afdfc
  45. 01 8月, 2009 1 次提交
  47. 12 7月, 2009 1 次提交
  49. 11 7月, 2009 2 次提交