Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 19 6月, 2012 3 次提交
    • V
      ARM: OMAP AM33xx: powerdomains: add AM335x support · 3f0ea764
      由 Vaibhav Hiremath 提交于 
      Add offset & mask fields to struct powerdomain

In case of AM33xx family of devices, there is no consistency between
PWRSTCTRL & PWRSTST register offsers in PRM space, for example -

PRM_XXX           PWRSTCTRL     PWRSTST
=======================================
PRM_PER_MOD:      0x0C,         0x08
PRM_WKUP_MOD:     0x04,         0x08
PRM_MPU_MOD:      0x00,         0x04
PRM_DEVICE_MOD:   NA,           NA

And also, there is no consistency between bit-offsets inside
PWRSTCTRL & PWRSTST register, for example -

PRM_XXX           LOGICRET  MEMON  MEMRET
=======================================
GFX_PWRCTRL:      2,        17,    6
PER_PWRCTRL:      3,        25,    29
MPU_PWRCTRL:      2,        18,    22
WKUP_PWRCTRL:     3,        NA,    NA

This means, we need to maintain and pass on all this information
in powerdomain handle; so adding fields for,
   - PWRSTCTRL/ST register offset
   - Logic retention state mask
   - mem_on/ret/pwrst/retst mask

Currently, this fields is only applicable and used for AM33XX devices.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: this patch is a combination of "Add offset & mask fields to
 struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx:
 Add powerdomain & PRM support"; updated for 3.5]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      3f0ea764
    • V
      ARM: OMAP AM33xx: CM: Introduce AM33xx CM APIs and register level details · f969a6dc
      由 Vaibhav Hiremath 提交于 
      As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so similar to
PRM implementation, handle AM33XX CM separately.

This patch introduces AM33XX CM module low-level api's, used and
required by omap clockdomain and hwmod framework.

Please note that cm-regbits-33xx.h (register bit field offset)
and cm33xx.h (register addr offset) files are mostly auto generated.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: split the hwmod code changes in this patch into a separate
 patch; updated for 3.5]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      f969a6dc
    • V
      ARM: OMAP AM33xx: PRM: add PRM support · ddd04b98
      由 Vaibhav Hiremath 提交于 
      As far as PRM/CM/PRCM modules are concerned, AM33XX device is
different than OMAP3 and OMAP4 architectures; so we need to handle it
separately.  This patch adds support for the PRM APIs required for
AM33XX device.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: separated the PRM parts of "ARM: OMAP3+: am33xx: Add
 powerdomain & PRM support" into this patch; fixed Makefile prm33xx.o
 location; cleaned up some checkpatch violations; updated for 3.5]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      ddd04b98
  3. 18 6月, 2012 2 次提交
  5. 05 6月, 2012 2 次提交
  7. 02 6月, 2012 24 次提交
  9. 01 6月, 2012 9 次提交
    • S
      ftrace/x86: Do not change stacks in DEBUG when calling lockdep · 5963e317
      由 Steven Rostedt 提交于 
      When both DYNAMIC_FTRACE and LOCKDEP are set, the TRACE_IRQS_ON/OFF
will call into the lockdep code. The lockdep code can call lots of
functions that may be traced by ftrace. When ftrace is updating its
code and hits a breakpoint, the breakpoint handler will call into
lockdep. If lockdep happens to call a function that also has a breakpoint
attached, it will jump back into the breakpoint handler resetting
the stack to the debug stack and corrupt the contents currently on
that stack.

The 'do_sym' call that calls do_int3() is protected by modifying the
IST table to point to a different location if another breakpoint is
hit. But the TRACE_IRQS_OFF/ON are outside that protection, and if
a breakpoint is hit from those, the stack will get corrupted, and
the kernel will crash:

[ 1013.243754] BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
[ 1013.272665] IP: [<ffff880145cc0000>] 0xffff880145cbffff
[ 1013.285186] PGD 1401b2067 PUD 14324c067 PMD 0
[ 1013.298832] Oops: 0010 [#1] PREEMPT SMP
[ 1013.310600] CPU 2
[ 1013.317904] Modules linked in: ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables crc32c_intel ghash_clmulni_intel microcode usb_debug serio_raw pcspkr iTCO_wdt i2c_i801 iTCO_vendor_support e1000e nfsd nfs_acl auth_rpcgss lockd sunrpc i915 video i2c_algo_bit drm_kms_helper drm i2c_core [last unloaded: scsi_wait_scan]
[ 1013.401848]
[ 1013.407399] Pid: 112, comm: kworker/2:1 Not tainted 3.4.0+ #30
[ 1013.437943] RIP: 8eb8:[<ffff88014630a000>]  [<ffff88014630a000>] 0xffff880146309fff
[ 1013.459871] RSP: ffffffff8165e919:ffff88014780f408  EFLAGS: 00010046
[ 1013.477909] RAX: 0000000000000001 RBX: ffffffff81104020 RCX: 0000000000000000
[ 1013.499458] RDX: ffff880148008ea8 RSI: ffffffff8131ef40 RDI: ffffffff82203b20
[ 1013.521612] RBP: ffffffff81005751 R08: 0000000000000000 R09: 0000000000000000
[ 1013.543121] R10: ffffffff82cdc318 R11: 0000000000000000 R12: ffff880145cc0000
[ 1013.564614] R13: ffff880148008eb8 R14: 0000000000000002 R15: ffff88014780cb40
[ 1013.586108] FS:  0000000000000000(0000) GS:ffff880148000000(0000) knlGS:0000000000000000
[ 1013.609458] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1013.627420] CR2: 0000000000000002 CR3: 0000000141f10000 CR4: 00000000001407e0
[ 1013.649051] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1013.670724] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1013.692376] Process kworker/2:1 (pid: 112, threadinfo ffff88013fe0e000, task ffff88014020a6a0)
[ 1013.717028] Stack:
[ 1013.724131]  ffff88014780f570 ffff880145cc0000 0000400000004000 0000000000000000
[ 1013.745918]  cccccccccccccccc ffff88014780cca8 ffffffff811072bb ffffffff81651627
[ 1013.767870]  ffffffff8118f8a7 ffffffff811072bb ffffffff81f2b6c5 ffffffff81f11bdb
[ 1013.790021] Call Trace:
[ 1013.800701] Code: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a <e7> d7 64 81 ff ff ff ff 01 00 00 00 00 00 00 00 65 d9 64 81 ff
[ 1013.861443] RIP  [<ffff88014630a000>] 0xffff880146309fff
[ 1013.884466]  RSP <ffff88014780f408>
[ 1013.901507] CR2: 0000000000000002

The solution was to reuse the NMI functions that change the IDT table to make the debug
stack keep its current stack (in kernel mode) when hitting a breakpoint:

  call debug_stack_set_zero
  TRACE_IRQS_ON
  call debug_stack_reset

If the TRACE_IRQS_ON happens to hit a breakpoint then it will keep the current stack
and not crash the box.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      5963e317
    • S
      x86: Allow nesting of the debug stack IDT setting · f8988175
      由 Steven Rostedt 提交于 
      When the NMI handler runs, it checks if it preempted a debug handler
and if that handler is using the debug stack. If it is, it changes the
IDT table not to update the stack, otherwise it will reset the debug
stack and corrupt the debug handler it preempted.

Now that ftrace uses breakpoints to change functions from nops to
callers, many more places may hit a breakpoint. Unfortunately this
includes some of the calls that lockdep performs. Which causes issues
with the debug stack. It too needs to change the debug stack before
tracing (if called from the debug handler).

Allow the debug_stack_set_zero() and debug_stack_reset() to be nested
so that the debug handlers can take advantage of them too.

[ Used this_cpu_*() over __get_cpu_var() as suggested by H. Peter Anvin ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      f8988175
    • S
      x86: Reset the debug_stack update counter · c0525a69
      由 Steven Rostedt 提交于 
      When an NMI goes off and it sees that it preempted the debug stack,
to keep the debug stack safe, it changes the IDT to point to one that
does not modify the stack on breakpoint (to allow breakpoints in NMIs).

But the variable that gets set to know to undo it on exit never gets
cleared on exit. Thus every NMI will reset it on exit the first time
it is done even if it does not need to be reset.

[ Added H. Peter Anvin's suggestion to use this_cpu_read/write ]

Cc: <stable@vger.kernel.org> # v3.3
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      c0525a69
    • S
      ftrace: Use breakpoint method to update ftrace caller · 8a4d0a68
      由 Steven Rostedt 提交于 
      On boot up and module load, it is fine to modify the code directly,
without the use of breakpoints. This is because boot up modification
is done before SMP is initialized, thus the modification is serial,
and module load is done before the module executes.

But after that we must use a SMP safe method to modify running code.
Otherwise, if we are running the function tracer and update its
function (by starting off the stack tracer, or perf tracing)
the change of the function called by the ftrace trampoline is done
directly. If this is being executed on another CPU, that CPU may
take a GPF and crash the kernel.

The breakpoint method is used to change the nops at all the functions, but
the change of the ftrace callback handler itself was still using a
direct modification. If tracing was enabled and the function callback
was changed then another CPU could fault if it was currently calling
the original callback. This modification must use the breakpoint method
too.

Note, the direct method is still used for boot up and module load.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      8a4d0a68
    • S
      ftrace: Synchronize variable setting with breakpoints · a192cd04
      由 Steven Rostedt 提交于 
      When the function tracer starts modifying the code via breakpoints
it sets a variable (modifying_ftrace_code) to inform the breakpoint
handler to call the ftrace int3 code.

But there's no synchronization between setting this code and the
handler, thus it is possible for the handler to be called on another
CPU before it sees the variable. This will cause a kernel crash as
the int3 handler will not know what to do with it.

I originally added smp_mb()'s to force the visibility of the variable
but H. Peter Anvin suggested that I just make it atomic.

[ Added comments as suggested by Peter Zijlstra ]
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      a192cd04
    • C
      syscalls, x86: add __NR_kcmp syscall · d97b46a6
      由 Cyrill Gorcunov 提交于 
      While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.

The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.

One of the ways for checking whether two tasks share e.g.  mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.

Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate.  So here is it --
__NR_kcmp.

It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.

Lookups for pids are done in the caller's PID namespace only.

At moment only x86 is supported and tested.

[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d97b46a6
    • A
      um: properly check all process' threads for a live mm · 2c922c51
      由 Anton Vorontsov 提交于 
      kill_off_processes() might miss a valid process, this is because checking
for process->mm is not enough.  Process' main thread may exit or detach
its mm via use_mm(), but other threads may still have a valid mm.

To catch this we use find_lock_task_mm(), which walks up all threads and
returns an appropriate task (with task lock held).
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2c922c51
    • A
      um: fix possible race on task->mm · 137d1a26
      由 Anton Vorontsov 提交于 
      Checking for task->mm is dangerous as ->mm might disappear (exit_mm()
assigns NULL under task_lock(), so tasklist lock is not enough).

We can't use get_task_mm()/mmput() pair as mmput() might sleep, so let's
take the task lock while we care about its mm.

Note that we should also use find_lock_task_mm() to check all process'
threads for a valid mm, but for uml we'll do it in a separate patch.
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      137d1a26
    • A
      um: should hold tasklist_lock while traversing processes · 9bd0a077
      由 Anton Vorontsov 提交于 
      Traversing the tasks requires holding tasklist_lock, otherwise it is
unsafe.

p.s.  However, I'm not sure that calling os_kill_ptraced_process() in the
atomic context is correct.  It seem to work, but please take a closer
look.
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9bd0a077