At some point someone wrote sysfs_readdir to insert a cursor
into the list of sysfs_dirents to ensure that sysfs_readdir would
restart properly.  That works but it is complex code and tends
to be expensive.

The same effect can be achieved by keeping the sysfs_dirents in
inode order and using the inode number as the f_pos.  Then
when we restart we just have to find the first dirent whose inode
number is equal or greater then the last sysfs_dirent we attempted
to return.

Removing the sysfs directory cursor also allows the remove of
all of the mysterious checks for sysfs_type(sd) != 0.   Which
were nonbovious checks to see if a cursor was in a directory list.

tj: offset marker for EOF is changed from UINT_MAX to INT_MAX to avoid
    overflow in case offset is 32bit.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a small cleanup patch that makes the code just
a little bit cleaner.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch modifies the users of sysfs_mount to use sysfs_root
instead (which is what they are looking for).  It then
makes sysfs_mount static to keep people from using it
by accident.

The net result is slightly faster and cleaner code.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since sysfs no longer stores fs directory information in the dcache
on a permanent basis kill_litter_super it is inappropriate and actively
wrong.  It will decrement the count on all dentries left in the
dcache before trying to free them.

At the moment this is not biting us only because we never unmount sysfs.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that sysfs_get_inode is dropping the inode lock
we no longer have a need from sysfs_instantiate.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

lookup_one_len_kern() should be called with the parent's i_mutex
locked.  Fix it.

Spotted by Eric W. Biederman.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

While platform_device.id is a u32, platform_device_add() handles "-1"
as a special id value. This has potential for confusion and bugs.
Making it an int instead should prevent problems from happening in
the future.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No one uses sysdev_drivers. Because no one calls sysdev_driver_register
with NULL class.

And it is difficult to imagine that someone want to implement a global
sysdev driver which is called with all sys_device on any kind of
sysdev_class.

So this patch removes global sysdev_drivers list and update comments
for this change.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

suspend_device() and resume_device() can now become static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

following patch fixes the i2c name collision with i2c-dev.

http://mcentral.de/wiki/index.php/Bugtracker#i2c_core_problem

This issue has been experienced with em28xx and saa7133 based devices.
I discussed that problem with Jean Delvare a while ago and he proposed 
to add a prefix to the class name.
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This has been in the SuSE kernels for some time now.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move uevent specific logic from the core into kobject_uevent.c, which
does no longer require to link the unused string array if hotplug
is not compiled in.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert from class_device to device in drivers/char.
Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert from class_device to device for drivers/video.
Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The DEFINE_DMI_ATTR macro has a single user left so we can expand it
for slightly shorter/simpler code.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLennart Poettering <mzxreary@0pointer.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can use sysfs attributes with an extra parameter for dmi id
attributes. This makes it possible to use the same callback function
for all attributes, reducing the binary size significantly (-18% on
x86_64.)
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLennart Poettering <mzxreary@0pointer.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With the previous sysfs_add_one() update, there is only one user of
the return value of sysfs_addrm_finish() and the user can switch to
testing @sd easily.  Make sysfs_addrm_finish() return void for cleaner
semantics as suggested by Satyam Sharma.

This patch doesn't introduce any noticeable behavior change.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make sysfs_add_one() check for duplicate entry and return -EEXIST if
such entry exists.  This simplifies node addition code a bit.

This patch doesn't introduce any noticeable behavior change.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When adding or removing a sysfs_dirent, the user used to be required
to call link/unlink separately.  It was for two reasons - code looked
like that before sysfs_addrm_cxt conversion and to avoid looping
through parent_sd->children list twice during removal.

Performance optimization during removal just isn't worth it.  Make
sysfs_add/remove_one() call sysfs_link/unlink_sibing() implicitly.
This makes code simpler albeit slightly less efficient.  This change
doesn't introduce any noticeable behavior change.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With the shadow directories gone, sysfs_rename_dir() can be simplified.

* parent doesn't need to be grabbed separately.  Just access
  old_dentry->d_parent.

* parent sd can never change.  Remove code to move under the new
  parent.

* Massage comments a bit.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* remove space between * and symbol name in variable declaration.

* kill unnecessary new line.

* kill 'found' and test 'sd' instead.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

While shadow directories appear to be a good idea, the current scheme
of controlling their creation and destruction outside of sysfs appears
to be a locking and maintenance nightmare in the face of sysfs
directories dynamically coming and going.  Which can now occur for
directories containing network devices when CONFIG_SYSFS_DEPRECATED is
not set.

This patch removes everything from the initial shadow directory support
that allowed the shadow directory creation to be controlled at a higher
level.  So except for a few bits of sysfs_rename_dir everything from
commit b592fcfe is now gone.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanup semaphore.h
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use mutex instead of semaphore in sysfs/file.c : sys_buffer.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Allows debugfs helper functions to have a hex output, rather than just decimal
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Due to historical reasons, struct kobject contained a static array for
the name, and a dynamic pointer in case the name got bigger than the
array.  That's just dumb, as people didn't always know which variable to
reference, even with the accessor for the kobject name.

This patch removes the static array, potentially saving a lot of memory
as the majority of kobjects do not have a very long name.

Thanks to Kay for the idea to do this.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A kset should not have its name set directly, so dynamically set the
name at runtime.

This is needed to remove the static array in the kobject structure which
will be changed in a future patch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct cdev does not need the kobject name to be set, as it is never
used.  This patch fixes up the few places it is set.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A number of different drivers incorrect access the kobject name field
directly.  This is not correct as the name might not be in the array.
Use the proper accessor function instead.

get_bus() should not be globally visable as it is not used by anything
other than drivers/base/bus.c.  This patch removes the visability of it,
and renames it to match all of the other *_get() functions in the
kernel.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

put_bus() should not be globally visable as it is not used by anything
other than drivers/base/bus.c.  This patch removes the visability of it,
and renames it to match all of the other *_put() functions in the
kernel.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are no more subsystems, it's a kset now so remove the function and
the only two users, which are in the driver core.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are no more subsystems, it's a kset now so remove the function and
the only two users, which are in the driver core.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This macro is only used by the driver core and is held over from when we
had subsystems.  It is not needed anymore.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This macro is only used by the driver core and is held over from when we
had subsystems.  It is not needed anymore.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The kernel creates a process for every event that is send, even when
there is no binary it could execute.  We are needlessly creating around
200-300 failing processes during early bootup, until we have the chance
to disable it from userspace.

This change allows us to disable /sbin/hotplug entirely, if you want to,
by setting UEVENT_HELPER_PATH="" in the kernel config.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>