- 13 12月, 2012 18 次提交
-
-
由 Alexander Block 提交于
When __merge_refs merges two refs, it is also needed to merge the inode_list of both refs. Otherwise we have missed backrefs and memory leaks. This happens for example if two inodes share an extent and both lie in the same leaf and thus also have the same parent. Signed-off-by: NAlexander Block <ablock84@googlemail.com> Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Tsutomu Itoh 提交于
Even if the hole punching is executed, the modification time of the file is not updated. So, current time is set to inode. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
Someone who is root or capable(CAP_SYS_ADMIN) could corrupt the superblock and make Btrfs printk("%s") crash while holding the uuid_mutex since nobody forces a limit on the string. Since the uuid_mutex is significant, the system would be unusable afterwards. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
When creating a snapshot, failing to commit a transaction can end up with aborting the transaction, following by doing a cleanup for it, where we'll free all snapshots pending to disk. So we check it and avoid double free on pending snapshots. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
When committing a transaction, we may bail out of running delayed refs due to ENOSPC, and then abort the current transaction to flip into readonly. But we'll hit a deadlock on ref head's lock since we forget to release its lock and other cleanup stuff. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Julia Lawall 提交于
Just use WARN_ON rather than an if containing only WARN_ON(1). A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - if (e) WARN_ON(1); + WARN_ON(e); // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Julia Lawall 提交于
Use WARN rather than printk followed by WARN_ON(1), for conciseness. A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression list es; @@ -printk( +WARN(1, es); -WARN_ON(1); // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
If we set BTRFS_INODE_NEEDS_FULL_SYNC, we should log all the extent, but now we forget to take it into account, and set a wrong max key, if so, we will skip the file extent metadata when doing logging. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
We forget to protect the modified_extents list, fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
There are two types of the file extent - inline extent and regular extent, When we log file extents, we didn't take inline extent into account, fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
Consider the following case: Task1 Task2 start_transaction commit_transaction check pending snapshots list and the list is empty. add pending snapshot into list skip the delalloc flush end_transaction ... And then the problem that the snapshot is different with the source subvolume happen. This patch fixes the above problem by flush all pending stuffs when all the other tasks end the transaction. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
If we flush inodes with pending delalloc in a transaction, we may join the same transaction handler more than 2 times. The reason is: Task use_count of trans handle commit_transaction 1 |-> btrfs_start_delalloc_inodes 1 |-> run_delalloc_nocow 1 |-> join_transaction 2 |-> cow_file_range 2 |-> join_transaction 3 In fact, cow_file_range needn't join the transaction again because the caller have joined the transaction, so we fix this problem by this way. Reported-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Variable 'found' is no more used. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
btrfs_wait_ordered_range expects for 'len' instead of 'end'. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
When we log new names, we need to log just enough to recreate the inode during log replay, and there is no need to log extents along with it. This actually fixes a bug revealed by xfstests 241, where it shows that we're logging some extents that have not updated metadata, so we don't get proper EXTENT_DATA items to be copied to log tree. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
The current behavior is to allow mounting or remounting a filesystem writeable in degraded mode if at least one writeable device is present. The next failed write access to a missing device which is above the tolerance of the configured level of redundancy results in an read-only enforcement. Even without this, the next time barrier_all_devices() is called and more devices are missing than tolerable, the switch to read-only mode takes place. In order to behave predictably and to provide proper feedback to the user at mount time, this patch compares the number of missing devices with the number of devices that are tolerated to be missing according to the configured RAID level. If more devices are missing than tolerated, e.g. if two devices are missing in case of RAID1, only a read-only mount and remount is allowed. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Masanari Iida 提交于
Correct spelling typo in btrfs. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 jeff.liu 提交于
Remove an invalid size check up from btrfs_shrink_dev(). The new size should not larger than the device->total_bytes as it was already verified before coming to here(i.e. new_size < old_size). Remove invalid check up for btrfs_shrink_dev(). Signed-off-by: NJie Liu <jeff.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 12 12月, 2012 13 次提交
-
-
由 Miao Xie 提交于
Though the process of the ordered extents is a bit different with the delalloc inode flush, but we can see it as a subset of the delalloc inode flush, so we also handle them by flush workers. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
The process of the ordered operations is similar to the delalloc inode flush, so we handle them by flush workers. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
This patch introduce a new worker pool named "flush_workers", and if we want to force all the inode with pending delalloc to the disks, we can queue those inodes into the work queue of the worker pool, in this way, those inodes will be flushed by multi-task. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Dave gave me an image of a very full file system that would abort the transaction because it ran out of space while committing the transaction. This is because we would think there was plenty of room to create a snapshot even though the global reserve was not full. This happens because we calculate the global reserve size before we unpin any space, so after we unpin the space we allow reservations to occur even though we haven't reserved all of the space for our global reserve. Fix this by adding to the global reserve while unpinning in order to make sure we always have enough space to do our work. With this patch we no longer end up with an aborted transaction, we return ENOSPC properly to the person trying to create the snapshot. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
'disk_key' is not used at all. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
The argument 'tree_mod_log' is not necessary since all of callers enable it. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Since we don't use MOD_LOG_KEY_REMOVE_WHILE_MOVING to add nritems during rewinding, we should insert a MOD_LOG_KEY_REMOVE operation first. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Key MOD_LOG_KEY_REMOVE_WHILE_MOVING means that we're doing memmove inside an extent buffer node, and the node's number of items remains unchanged (unless we are inserting a single pointer, but we have MOD_LOG_KEY_ADD for that). So we don't need to increase node's number of items during rewinding, otherwise we may get an node larger than leafsize and cause general protection errors later. Here is the details, - If we do memory move for inserting a single pointer, we need to add node's nritems by one, and we honor MOD_LOG_KEY_ADD for adding. - If we do memory move for deleting a single pointer, we need to decrease node's nritems by one, and we honor MOD_LOG_KEY_REMOVE for deleting. - If we do memory move for balance left/right, we need to decrease node's nritems, and we honor MOD_LOG_KEY_REMOVE for balaning. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
When we find a bitmap free space entry, we may check the previous extent entry covers the offset or not. But if we find this entry is also a bitmap entry, we will continue to check the previous entry of the current one by a while loop. It is unnecessary because it is impossible that the extent entry which is in front of a bitmap entry can cover the offset of the entry after that bitmap entry. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Alex reported a problem where we were writing between chunks on a rbd device. The thing is we do bio_add_page using logical offsets, but the physical offset may be different. So when we map the bio now check to see if the bio is still ok with the physical offset, and if it is not split the bio up and redo the bio_add_page with the physical sector. This fixes the problem for Alex and doesn't affect performance in the normal case. Thanks, Reported-and-tested-by: NAlex Elder <elder@inktank.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
In some places(such as: evicting inode), we just can not flush the reserved space of delalloc, flushing the delayed directory index and delayed inode is OK, but we don't try to flush those things and just go back when there is no enough space to be reserved. This patch fixes this problem. We defined 3 types of the flush operations: NO_FLUSH, FLUSH_LIMIT and FLUSH_ALL. If we can in the transaction, we should not flush anything, or the deadlock would happen, so use NO_FLUSH. If we flushing the reserved space of delalloc would cause deadlock, use FLUSH_LIMIT. In the other cases, FLUSH_ALL is used, and we will flush all things. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
The comment is not coincident with the code. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
div_factor{_fine} has been implemented for two times, cleanup it. And I move them into a independent file named math.h because they are common math functions. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 11 12月, 2012 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Florian Fainelli 提交于
The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: NFlorian Fainelli <florian@openwrt.org> CC: stable@vger.kernel.org # v3.5+ Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Netlink socket dumping had several missing verifications and checks. In particular, address comparisons in the request byte code interpreter could access past the end of the address in the inet_request_sock. Also, address family and address prefix lengths were not validated properly at all. This means arbitrary applications can read past the end of certain kernel data structures. Fixes from Neal Cardwell. 2) ip_check_defrag() operates in contexts where we're in the process of, or about to, input the packet into the real protocols (specifically macvlan and AF_PACKET snooping). Unfortunately, it does a pskb_may_pull() which can modify the backing packet data which is not legal if the SKB is shared. It very much can be shared in this context. Deal with the possibility that the SKB is segmented by using skb_copy_bits(). Fix from Johannes Berg based upon a report by Eric Leblond. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv4: ip_check_defrag must not modify skb before unsharing inet_diag: validate port comparison byte code to prevent unsafe reads inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run() inet_diag: validate byte code to prevent oops in inet_diag_bc_run() inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state
-
由 Linus Torvalds 提交于
This reverts commits a5091539 and d7c3b937. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: NMel Gorman <mgorman@suse.de> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by: NEric Leblond <eric@regit.org> Cc: stable@vger.kernel.org Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
This reverts commit 782fd304. We are going to reinstate the __GFP_NO_KSWAPD flag that has been removed, the removal reverted, and then removed again. Making this commit a pointless fixup for a problem that was caused by the removal of __GFP_NO_KSWAPD flag. The thing is, we really don't want to wake up kswapd for THP allocations (because they fail quite commonly under any kind of memory pressure, including when there is tons of memory free), and these patches were just trying to fix up the underlying bug: the original removal of __GFP_NO_KSWAPD in commit c6543459 ("mm: remove __GFP_NO_KSWAPD") was simply bogus. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 12月, 2012 3 次提交
-
-
由 Neal Cardwell 提交于
Add logic to verify that a port comparison byte code operation actually has the second inet_diag_bc_op from which we read the port for such operations. Previously the code blindly referenced op[1] without first checking whether a second inet_diag_bc_op struct could fit there. So a malicious user could make the kernel read 4 bytes beyond the end of the bytecode array by claiming to have a whole port comparison byte code (2 inet_diag_bc_op structs) when in fact the bytecode was not long enough to hold both. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Add logic to check the address family of the user-supplied conditional and the address family of the connection entry. We now do not do prefix matching of addresses from different address families (AF_INET vs AF_INET6), except for the previously existing support for having an IPv4 prefix match an IPv4-mapped IPv6 address (which this commit maintains as-is). This change is needed for two reasons: (1) The addresses are different lengths, so comparing a 128-bit IPv6 prefix match condition to a 32-bit IPv4 connection address can cause us to unwittingly walk off the end of the IPv4 address and read garbage or oops. (2) The IPv4 and IPv6 address spaces are semantically distinct, so a simple bit-wise comparison of the prefixes is not meaningful, and would lead to bogus results (except for the IPv4-mapped IPv6 case, which this commit maintains). Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND operations. Previously we did not validate the inet_diag_hostcond, address family, address length, and prefix length. So a malicious user could make the kernel read beyond the end of the bytecode array by claiming to have a whole inet_diag_hostcond when the bytecode was not long enough to contain a whole inet_diag_hostcond of the given address family. Or they could make the kernel read up to about 27 bytes beyond the end of a connection address by passing a prefix length that exceeded the length of addresses of the given family. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-