First, it looks to me like the atomic_inc is wrong.
We should be decrementing refcount only once here, no? It's
already being done by the mr_put() at the end.

Second, simplify the logic a bit by bailing early (with a warning)
if !mr.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Clearly separate rdma-related variables in rm from data-related ones.
This is in anticipation of adding atomic support.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Favor "if (foo)" style over "if (foo != NULL)".
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

This fits better in connection.c, rather than threads.c.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Do not nest m_rs_lock under c_lock

Disable interrupts in {rdma,atomic}_send_complete
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

This function has been the source of numerous bugs; it's just
too complicated. Simplified to nest spinlocks cleanly within
the second loop body, and kick out early if there are no
rms to drop.

This will be a little slower because conn lock is grabbed for
each entry instead of "caching" the lock across rms, but this
should be entirely irrelevant to fastpath performance.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

On second look at this bug (OFED #2002), it seems that the
collision is not with the retransmission queue (packet acked
by the peer), but with the local send completion.  A theoretical
sequence of events (from time t0 to t3) is thought to be as
follows,

Thread #1
t0:
    sock_release
    rds_release
    rds_send_drop_to /* wait on send completion */
t2:
    rds_rdma_drop_keys()   /* destroy & free all mrs */

Thread #2
t1:
    rds_ib_send_cq_comp_handler
    rds_ib_send_unmap_rm
    rds_message_unmapped   /* wake up #1 @ t0 */
t3:
    rds_message_put
    rds_message_purge
    rds_mr_put   /* memory corruption detected */

The problem with the rds_rdma_drop_keys() is it could
remove a mr's refcount more than its due (i.e. repeatedly
as long as it still remains in the tree (mr->r_refcount > 0)).
Theoretically it should remove only one reference - reference
by the tree.

        /* Release any MRs associated with this socket */
        while ((node = rb_first(&rs->rs_rdma_keys))) {
                mr = container_of(node, struct rds_mr, r_rb_node);
                if (mr->r_trans == rs->rs_transport)
                        mr->r_invalidate = 0;
                rds_mr_put(mr);
        }

I think the correct way of doing it is to remove the mr from
the tree and rds_destroy_mr it first, then a rds_mr_put()
to decrement its reference count by one.  Whichever thread
holds the last reference will free the mr via rds_mr_put().
Signed-off-by: NTina Yang <tina.yang@oracle.com>
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

in_interrupt() is true in softirqs. The BUG_ONs are supposed
to check for if irqs are disabled, so we should use
BUG_ON(irqs_disabled()) instead, duh.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

No need to test twice sk->sk_shutdown & RCV_SHUTDOWN
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert pr_<level>("%s" ..., (struct netdev *)->name ...)
to netdev_<level>((struct netdev *), ...)
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch standardizes caif message logging prefixes.

Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__
Add missing "\n"s to some logging messages
Convert pr_warning to pr_warn

This changes the logging message prefix from CAIF: to caif:
for all uses but caif_socket.c and chnl_net.c.  Those now use
their filename without extension.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function has an unsigned return type, but returns a negative constant
to indicate an error condition.  The result of calling the function is
always stored in a variable of type (signed) int, and thus unsigned can be
dropped from the return type.

A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@exists@
identifier f;
constant C;
@@

 unsigned f(...)
 { <+...
*  return -C;
 ...+> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pskb_expand_head() blindly takes references on fragments before calling
skb_release_data(), potentially releasing these references.

We can add a fast path, avoiding these atomic operations, if we own the
last reference on skb->head.

Based on a previous patch from David
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cause TIPC to return EAGAIN if it is unable to enable a new Ethernet
bearer because one or more recently disabled Ethernet bearers are
temporarily consuming resources during shut down.  (The previous error
code, EDQUOT, is now returned only if all available Ethernet bearer
data structures are fully enabled at the time the request to enable an
additional bearer is received.)
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add code to expand the headroom of an outgoing TIPC message if the
sk_buff has insufficient room to hold the header for the associated
Ethernet device.  This change is necessary to ensure that messages
TIPC does not create itself (eg. incoming messages that are being
routed to another node) do not cause problems, since TIPC has no
control over the amount of headroom available in such messages.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Optimizes TIPC's name table translation code to avoid unnecessary
manipulation of the node address field of the resulting port id when
name translation fails.  This change is possible because a valid port
id cannot have a reference field of zero, so examining the reference
only is sufficient to determine if the translation was successful.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__alloc_skb() uses a memset() to clear all the beginning of skb,
including bitfields contained in 'flags1' & 'flags2'.

We dont need any more to use kmemcheck_annotate_bitfield() on these
fields. However, we still need it for the clone part, which is not
cleared.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to accepting router advertisement, the IPv6 stack does not send router
solicitations if forwarding is enabled.

This patch enables this behavior to be overruled by setting forwarding to the
special value 2.
Signed-off-by: NThomas Graf <tgraf@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current IPv6 behavior is to not accept router advertisements while
forwarding, i.e. configured as router.

This does make sense, a router is typically not supposed to be auto
configured. However there are exceptions and we should allow the
current behavior to be overwritten.

Therefore this patch enables the user to overrule the "if forwarding
enabled then don't listen to RAs" rule by setting accept_ra to the
special value of 2.

An alternative would be to ignore the forwarding switch alltogether
and solely accept RAs based on the value of accept_ra. However, I
found that if not intended, accepting RAs as a router can lead to
strange unwanted behavior therefore we it seems wise to only do so
if the user explicitely asks for this behavior.
Signed-off-by: NThomas Graf <tgraf@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean the code up according to Documentation/CodingStyle.

Don't initialize the variable dont_send in arp_process().

Remove the temporary varialbe flags in arp_state_to_flags().
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a small helper ptype_head() to get the head to manipulate

dev_add_pack() & __dev_remove_pack() can use a spinlock without
blocking BH, since softirq use RCU, and these functions are run from
process context only.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use correctly the in_pkts packet counter also for SCTP
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kill last_rx use in l2tp and two net drivers
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thanks to Ilpo Jarvinen, this updates also the initial window
setting for tcp_output with regard to RFC 5681.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise the hardware scan handler could access an invalid scan request
structure.  The driver should cancel any pending hardware scans during
the suspend process anyway, so also add a warning if the hardware scan
is still pending when the device resumes.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

(skb->data - skb->head) can be changed by skb_headroom(skb)

Remove some uses of NET_SKBUFF_DATA_USES_OFFSET, using
(skb_end_pointer(skb) - skb->head) or
(skb_tail_pointer(skb) - skb->head) : compiler does the right thing,
and this is more readable for us ;)

(struct skb_shared_info *) casts in pskb_expand_head() to help memcpy()
to use aligned moves.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- napi_gro_flush() is exported from net/core/dev.c, to avoid
  an irq_save/irq_restore in the packet receive path.
- use napi_gro_receive() instead of netif_receive_skb()
- use napi_gro_flush() before calling __napi_complete()
- turn on NETIF_F_GRO by default
- Tested on a Marvell 88E8001 Gigabit NIC
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tunnel4_handlers, tunnel64_handlers, tunnel6_handlers and
tunnel46_handlers are protected by RCU, but we dont use appropriate rcu
primitives to scan them. rcu_lock() is already held by caller.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp4_gro_receive() and tcp4_gro_complete() dont need to be exported.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

remove non used variable "queue" in pg_cleanup
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[patch net-next-2.6] vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive

Use helper as in other places.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function exists to clean-up after a hardware error or something
similar.  The restart is accomplished using the same infrastructure used
to resume after a suspend.  The suspend path cancels running scans, so
it seems appropriate to do that here as well for software-based scans.
If a hardware-based scan is pending, issue a warning message since this
indicates that the drivers has failed to clean-up after itself.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The same expression is tested twice and the result is the same each time.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The signal strength value in a single RX frame is not that reliable,
so it is better to delay start of CQM events until there is a real
average signal strength from more than a single Beacon frame
available.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The ave_beacon_signal value uses 1/16 dB unit and as such, must be
initialized with the signal level of the first Beacon frame multiplied
by 16. This fixes an issue where the initial CQM events are reported
incorrectly with a burst of events while the running average
approaches the correct value after the incorrect initialization. This
could cause user space -based roaming decision process to get quite
confused at the moment when we would like to go through authentication
and DHCP.

Cc: stable@kernel.org
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

tunnel6_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>