- 16 1月, 2009 5 次提交
-
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] This patch makes percpu symbols zerobased on x86_64 SMP by adding PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on the percpu output section and using it in vmlinux_64.lds.S. A new PHDR is added as existing ones cannot contain sections near address zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which always points to the vaddr of the loaded percpu data.init region. The following adjustments have been made to accomodate the address change. * code to locate percpu gdt_page in head_64.S is updated to add the load address to the gdt_page offset. * __per_cpu_load is used in places where access to the init data area is necessary. * pda->data_offset is initialized soon after C code is entered as zero value doesn't work anymore. This patch is mostly taken from Mike Travis' "x86_64: Base percpu variables at zero" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open coding it. This will ease future changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] * Ruggedize some calls in setup_percpu.c to prevent mishaps in early calls, particularly for non-critical functions. * Cleanup DEBUG_PER_CPU_MAPS usages and some comments. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make early_per_cpu() a lvalue as per_cpu() is and use it where applicable. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
There's no instruction to move a 64bit immediate into memory location. Drop "i". Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 1月, 2009 4 次提交
-
-
由 Ingo Molnar 提交于
Impact: cleanup Use the proper type. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
E.g. when called due to an early panic. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Impact: widen the effect of the 'nolapic' boot parameter "nolapic" should not only suppress SMP and use of the LAPIC, but it also ought to have the effect of disabling all IO-APIC related activity as well as PCI MSI and HT-IRQs. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Thierry Vignaud reported: > http://bugzilla.kernel.org/show_bug.cgi?id=12372 > > On P4 with an SiS motherboard (video card is a SiS 651) > X server fails to start with error: > xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument) Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time. Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed) Reported-and-tested-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 1月, 2009 9 次提交
-
-
由 Yinghai Lu 提交于
Impact: clean up to be same as 64bit 32-bit is using per-cpu vector too, so don't use default NR_IRQS. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
This commit broke flush_tlb_others_ipi() causing boot hangs on a 16 logical cpu system: > commit 4595f962 > Author: Rusty Russell <rusty@rustcorp.com.au> > Date: Sat Jan 10 21:58:09 2009 -0800 > > x86: change flush_tlb_others to take a const struct cpumask This change resulted in sending the invalidate tlb vector to the sender itself causing the hang. flush_tlb_others_ipi() should exclude the sender itself from the destination list. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: reduce scope of debug check - avoid warnings The logic to find whether identity map exists or not using high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete as the memory withing the range may not be mapped if there is a unusable hole in e820. Specifically, on my test system I started seeing these warnings with tools like hwinfo, acpidump trying to map ACPI region. [ 27.400018] ------------[ cut here ]------------ [ 27.400344] WARNING: at /home/venkip/src/linus/linux-2.6/arch/x86/mm/pageattr.c:560 __change_page_attr_set_clr+0xf3/0x8b8() [ 27.400821] Hardware name: X7DB8 [ 27.401070] CPA: called for zero pte. vaddr = ffff8800cff6a000 cpa->vaddr = ffff8800cff6a000 [ 27.401569] Modules linked in: [ 27.401882] Pid: 4913, comm: dmidecode Not tainted 2.6.28-05716-gfe0bdec6 #586 [ 27.402141] Call Trace: [ 27.402488] [<ffffffff80237c21>] warn_slowpath+0xd3/0x10f [ 27.402749] [<ffffffff80274ade>] ? find_get_page+0xb3/0xc9 [ 27.403028] [<ffffffff80274a2b>] ? find_get_page+0x0/0xc9 [ 27.403333] [<ffffffff80226425>] __change_page_attr_set_clr+0xf3/0x8b8 [ 27.403628] [<ffffffff8028ec99>] ? __purge_vmap_area_lazy+0x192/0x1a1 [ 27.403883] [<ffffffff8028eb52>] ? __purge_vmap_area_lazy+0x4b/0x1a1 [ 27.404172] [<ffffffff80290268>] ? vm_unmap_aliases+0x1ab/0x1bb [ 27.404512] [<ffffffff80290105>] ? vm_unmap_aliases+0x48/0x1bb [ 27.404766] [<ffffffff80226d28>] change_page_attr_set_clr+0x13e/0x2e6 [ 27.405026] [<ffffffff80698fa7>] ? _spin_unlock+0x26/0x2a [ 27.405292] [<ffffffff80227e6a>] ? reserve_memtype+0x19b/0x4e3 [ 27.405590] [<ffffffff80226ffd>] _set_memory_wb+0x22/0x24 [ 27.405844] [<ffffffff80225d28>] ioremap_change_attr+0x26/0x28 [ 27.406097] [<ffffffff80228355>] reserve_pfn_range+0x1a3/0x235 [ 27.406427] [<ffffffff80228430>] track_pfn_vma_new+0x49/0xb3 [ 27.406686] [<ffffffff80286c46>] remap_pfn_range+0x94/0x32c [ 27.406940] [<ffffffff8022878d>] ? phys_mem_access_prot_allowed+0xb5/0x1a8 [ 27.407209] [<ffffffff803e9bf4>] mmap_mem+0x75/0x9d [ 27.407523] [<ffffffff8028b3b4>] mmap_region+0x2cf/0x53e [ 27.407776] [<ffffffff8028b8cc>] do_mmap_pgoff+0x2a9/0x30d [ 27.408034] [<ffffffff8020f4a4>] sys_mmap+0x92/0xce [ 27.408339] [<ffffffff8020b65b>] system_call_fastpath+0x16/0x1b [ 27.408614] ---[ end trace 4b16ad70c09a602d ]--- [ 27.408871] dmidecode:4913 reserve_pfn_range ioremap_change_attr failed write-back for cff6a000-cff6b000 This is wih track_pfn_vma_new trying to keep identity map in sync. The address cff6a000 is the ACPI region according to e820. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) And is not mapped as per init_memory_mapping. [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff60000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 We can add logic to check for this. But, there can also be other holes in identity map when we have 1GB of aligned reserved space in e820. This patch handles it by removing the WARN_ON and returning a specific error value (EFAULT) to indicate that the address does not have any identity mapping. The code that tries to keep identity map in sync can ignore this error, with other callers of cpa still getting error here. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: avoid warning message, potentially solve 3D performance regression Change x86 PAT code to return compatible memtype if the exact memtype that was requested in remap_pfn_rage and friends is not available due to some conflict. This is done by returning the compatible type in pgprot parameter of track_pfn_vma_new(), and the caller uses that memtype for page table. Note that track_pfn_vma_copy() which is basically called during fork gets the prot from existing page table and should not have any conflict. Hence we use strict memtype check there and do not allow compatible memtypes. This patch fixes the bug reported here: http://marc.info/?l=linux-kernel&m=123108883716357&w=2 Specifically the error message: X:5010 map pfn expected mapping type write-back for d0000000-d0101000, got write-combining Should go away. Reported-and-bisected-by: NKevin Winchester <kjwinchester@gmail.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer. Subsequent patch changes the x86 PAT handling to return a compatible memtype in pgprot_t, if what was requested cannot be allowed due to conflicts. No fuctionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Move the new memtype old memtype allowed check to header so that is can be shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range() code path. No functionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
Impact: reduce kernel image size Hugh Dickins noticed that older gcc versions when the kernel is built for code size didn't inline some of the bitops. Mark all complex x86 bitops that have more than a single asm statement or two as always inline to avoid this problem. Probably should be done for other architectures too. Ingo then found a better fix that only requires a single line change, but it unfortunately only works on gcc 4.3. On older gccs the original patch still makes a ~0.3% defconfig difference with CONFIG_OPTIMIZE_INLINING=y. With gcc 4.1 and a defconfig like build: 6116998 1138540 883788 8139326 7c323e vmlinux-oi-with-patch 6137043 1138540 883788 8159371 7c808b vmlinux-optimize-inlining ~20k / 0.3% difference. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 1月, 2009 7 次提交
-
-
由 Ingo Molnar 提交于
Impact: fix potential boot crash on MAXSMP Remove code left over by: 50c668d6: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read That cmd.cpumask is not allocated anymore. No impact on default !MAXSMP kernels. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: save RAM with large NR_CPUS, get smaller nr_irqs Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Ingo Molnar 提交于
This reverts commit e0c73175. This patch was wrong, as lockdep (and thus the irq state tracer) aren't nmi safe. People are already seeing lockdep warnings due to this. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
This reverts commit 7503bfba. Dieter Ries reported bootup soft-hangs and bisected it back to this commit, and reverting this commit gave him a working system. The commit introduces work_on_cpu() use into the cpufreq code, but that is subtly problematic from a lock hierarchy POV: the hotplug-cpu lock is an highlevel lock that is taken before lowlevel locks, and in this codepath we are called with the policy lock taken. Dieter did not have lockdep enabled so we dont have a nice stack trace proof for this, but using work_on_cpu() in such a lowlevel place certainly looks wrong, so we revert the patch. work_on_cpu() needs to be reworked to be more generally usable. Reported-by: NDieter Ries <clip2@gmx.de> Tested-by: NDieter Ries <clip2@gmx.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Fix this by reintroducing asm/smp.h include in apic.c - later on I will fix this by removing non-smp data from smp.h Also fix the __inquire_remote_apic() prototype/inline. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Fix this by reintroducing asm/smp.h include in mpparse.c - later on I will fix this by removing non-smp data from smp.h. Reported-by: NPetr Titera <P.Titera@century.cz> Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
Ajith Kumar noticed: I was going through the vmalloc fault handling for x86_64 and am unclear about the following lines in the vmalloc_fault() function. pgd = pgd_offset(current->mm ?: &init_mm, address); pgd_ref = pgd_offset_k(address); Here the intention is to get the pgd corresponding to the current process and sync it up with the pgd in init_mm(obtained from pgd_offset_k). However, for kernel threads current->mm is NULL and hence pgd = pgd_offset(init_mm, address) = pgd_ref which means the fault handler returns without setting the pgd entry in the MM structure in the context of which the kernel thread has faulted. This could lead to never-ending faults and busy looping of kernel threads like pdflush. So, shouldn't the pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd = pgd_offset(current->active_mm ?: &init_mm, address); We can use active_mm unconditionally because it should be always set. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 1月, 2009 12 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Fix: ERROR: trailing whitespace ERROR: code indent should use tabs where possible WARNING: %Ld/%Lu are not-standard C, use %lld/%llu WARNING: printk() should include KERN_ facility level ERROR: spaces required around that '=' (ctx:VxW) total: 13 errors, 2 warnings Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Fix: ERROR: code indent should use tabs where possible ERROR: trailing whitespace ERROR: spaces required around that '=' (ctx:VxW) total: 3 errors, 0 warnings Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Fix: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> total: 0 errors, 1 warnings Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Fix: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> ERROR: trailing whitespace ERROR: "(foo*)" should be "(foo *)" total: 3 errors, 1 warnings Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Ingo Molnar wrote: > All non-x86 architectures fail to build: > > In file included from /home/mingo/tip/include/linux/random.h:11, > from /home/mingo/tip/include/linux/stackprotector.h:6, > from /home/mingo/tip/init/main.c:17: > /home/mingo/tip/include/linux/irqnr.h:26:63: error: asm/irq_vectors.h: No such file or directory Do not include asm/irq_vectors.h in generic code - it's not available on all architectures. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: Reduce memory usage. This is the second half of the changes to make the irq_desc_ptrs be variable sized based on nr_cpu_ids. This is done by adding a new "max_nr_irqs" macro to irq_vectors.h (and a dummy in irqnr.h) to return a max NR_IRQS value based on NR_CPUS or nr_cpu_ids. This necessitated moving the define of MAX_IO_APICS to a separate file (asm/apicnum.h) so it could be included without the baggage of the other asm/apicdef.h declarations. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: preparation, cleanup, add KERN_INFO printk Modify references from NR_IRQS to nr_irqs as the later will become variable-sized based on nr_cpu_ids when CONFIG_SPARSE_IRQS=y. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: reduce stack usage. init_intel_cacheinfo() does not use the cpumask so define a subset of struct _cpuid4_info (_cpuid4_info_regs) that can be used instead. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: Reduce memory usage, use new cpumask API. Use cpumask_var_t for 'cpus' cpumask in struct threshold_bank and update remaining old cpumask_t functions to new cpumask API. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: Improve tlb flush performance for UV Calling alloc_cpumask_var a zillion times a second does affect performance. Replace with static cpumask. Note: when CONFIG_X86_UV is defined, this extra PER_CPU memory will be optimized out for non-UV configs as is_uv_system() will then return a constant 0. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Rusty Russell 提交于
Impact: reduce stack usage, use new cpumask API. This is made a little more tricky by uv_flush_tlb_others which actually alters its argument, for an IPI to be sent to the remaining cpus in the mask. I solve this by allocating a cpumask_var_t for this case and falling back to IPI should this fail. To eliminate temporaries in the caller, all flush_tlb_others implementations now do the this-cpu-elimination step themselves. Note also the curious "cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask)" which has been there since pre-git and yet f->flush_cpumask is always zero at this point. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: reduce memory usage, use new cpumask API. Replace the affinity and pending_masks with cpumask_var_t's. This adds to the significant size reduction done with the SPARSE_IRQS changes. The added functions (init_alloc_desc_masks & init_copy_desc_masks) are in the include file so they can be inlined (and optimized out for the !CONFIG_CPUMASKS_OFFSTACK case.) [Naming chosen to be consistent with the other init*irq functions, as well as the backwards arg declaration of "from, to" instead of the more common "to, from" standard.] Includes a slight change to the declaration of struct irq_desc to embed the pending_mask within ifdef(CONFIG_SMP) to be consistent with other references, and some small changes to Xen. Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64 Signed-off-by: NMike Travis <travis@sgi.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: virtualization@lists.osdl.org Cc: xen-devel@lists.xensource.com Cc: Yinghai Lu <yhlu.kernel@gmail.com>
-
- 11 1月, 2009 3 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-