toshiba_acpi needs to execute an AML method within the EC namespace
to make hotkeys work on some platforms. Provide an interface to
allow it to easily get a handle to the EC namespace for this purpose.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some firmware will access memory in ACPI NVS region via APEI.  That
is, instructions in APEI ERST/EINJ table will read/write ACPI NVS
region.  The original resource conflict checking in APEI code will
check memory/ioport accessed by APEI via general resource management
mechanism.  But ACPI NVS region is marked as busy already, so that the
false resource conflict will prevent APEI ERST/EINJ to work.

To fix this, this patch record ACPI NVS regions, so that we can avoid
request resources for memory region inside it.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

If the kernel has requested control of the SHPC native hotplug
feature for a given root bridge, the acpiphp driver should not try
to handle that root bridge and it should leave it to shpchp.
Failing to do so causes problems to happen if shpchp is loaded
and unloaded before loading acpiphp (ACPI-based hotplug won't work
in that case anyway).

To address this issue make find_root_bridges() ignore PCI root
bridges with SHPC native hotplug enabled and make add_bridge()
return error code if SHPC native hotplug is enabled for the given
root bridge.  This causes acpiphp to refuse to load if SHPC native
hotplug is enabled for all root bridges and to refuse binding to
the root bridges with SHPC native hotplug enabled.
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

b552a8c5 ("ACPI: remove NID_INVAL") removed the left over uses of
NID_INVAL, but didn't actually remove the definition.  Remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

In APEI firmware first mode, hardware error is reported by hardware to
firmware firstly, then firmware reports the error to Linux in a GHES
error record via POLL/SCI/IRQ/NMI etc.

This may result in some issues if OS has no full APEI support.  So
some firmware implementation will work in a back-compatible mode by
default.  Where firmware will only notify OS in old-fashion, without
GHES record.  For example, for a fatal hardware error, only NMI is
signaled, no GHES record.

To gain full APEI power on these machines, APEI bit in generic _OSC
call can be specified to tell firmware that Linux has full APEI
support.  This patch adds the APEI bit support in generic _OSC call.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

static void acpi_ec_gpe_query(void *ec_cxt);
-> The function is right above this declaration -> not needed.

poll_force is also not used, cleaned up in ec.c and its users:
compal-laptop and msi-laptop.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Commit ca9b600b ("ACPI / PM: Make suspend_nvs_save() use
acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c
from using different ioremap() variants by making the latter use
acpi_os_map_memory() for mapping the NVS pages.  However, that also
requires acpi_os_unmap_memory() to be used for unmapping them, which
causes synchronize_rcu() to be executed many times in a row
unnecessarily and introduces substantial delays during resume on some
systems.

Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c
introduce acpi_os_ioremap() calling ioremap_cache() and make the code in
both osl.c and nvs.c use it.
Reported-by: NJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent rework of the NVS saving/restoring code introduced two
build issues for !CONFIG_ACPI, a warning in drivers/acpi/internal.h
and an error in arch/x86/kernel/e820.c.

Fix them by providing suitable static inline definitions of the
relevant functions.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The saving of the ACPI NVS area during hibernation and suspend and
restoring it during the subsequent resume is entirely specific to
ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS
configuration option which is redundant.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

commit b0ed7a91(ACPICA/ACPI: Add new host interfaces for _OSI suppor)
introduced a regression that _OSI string setup fails.

There are 2 paths to setup _OSI string.

DMI:
acpi_dmi_osi_linux -> set_osi_linux -> acpi_osi_setup -> copy _OSI
string to osi_setup_string

Boot command line:
acpi_osi_setup -> copy _OSI string to osi_setup_string

Later, acpi_osi_setup_late will be called to handle osi_setup_string.
If _OSI string is "Linux" or "!Linux", then the call path is,

acpi_osi_setup_late -> acpi_cmdline_osi_linux -> set_osi_linux ->
acpi_osi_setup -> copy _OSI string to osi_setup_string

This actually never installs _OSI string(acpi_install_interface not
called), but just copy the _OSI string to osi_setup_string.

This patch fixes the regression.
Reported-and-tested-by: NLukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add remapping and unmapping interfaces for ACPI registers that are
backed by memory mapped I/O (MMIO).  These interfaces, along with
the MMIO remapping list, enable accesses of such registers from within
interrupt context.

ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure".
Signed-off-by: NMyron Stowe <myron.stowe@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Found by running make namespacecheck on linux-next
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

It is possible that the BIOS will not grant control of all _OSC
features requested via acpi_pci_osc_control_set(), so it is
recommended to negotiate the final set of _OSC features with the
query flag set before calling _OSC to request control of these
features.

To implement it, rework acpi_pci_osc_control_set() so that the caller
can specify the mask of _OSC control bits to negotiate and the mask
of _OSC control bits that are absolutely necessary to it.  Then,
acpi_pci_osc_control_set() will run _OSC queries in a loop until
the mask of _OSC control bits returned by the BIOS is equal to the
mask passed to it.  Also, before running the _OSC request
acpi_pci_osc_control_set() will check if the caller's required
control bits are present in the final mask.

Using this mechanism we will be able to avoid situations in which the
BIOS doesn't grant control of certain _OSC features, because they
depend on some other _OSC features that have not been requested.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Commit 2a6b6976
(ACPI: Store NVS state even when entering suspend to RAM) caused the
ACPI suspend code save the NVS area during suspend and restore it
during resume unconditionally, although it is known that some systems
need to use acpi_sleep=s4_nonvs for hibernation to work.  To allow
the affected systems to avoid saving and restoring the NVS area
during suspend to RAM and resume, introduce kernel command line
option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its
alias temporarily (add acpi_sleep=s4_nonvs to the feature removal
file).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 .
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Ntomas m <tmezzadra@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

When the user passes the kernel parameter acpi_enforce_resources=lax,
the ACPI resources are no longer protected, so a native driver can
make use of them. In that case, we do not want the asus_atk0110 to be
loaded. Unfortunately, this driver loads automatically due to its
MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for
the same device - this is bad.

So I suggest that we prevent the asus_atk0110 driver from loading if
acpi_enforce_resources=lax.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Len Brown <lenb@kernel.org>

The ACPI spec tells us that the firmware will reenable SCI_EN on resume.
Reality disagrees in some cases. The ACPI spec tells us that the only way
to set SCI_EN is via an SMM call.
https://bugzilla.kernel.org/show_bug.cgi?id=13745 shows us that doing so
may break machines. Tracing the ACPI calls made by Windows shows that it
unconditionally sets SCI_EN on resume with a direct register write, and
therefore the overwhelming probability is that everything is fine with
this behaviour.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

In perverse acpi implementations the isa irqs are not identity mapped
to the first 16 gsi.  Furthermore at least the extended interrupt
resource capability may return gsi's and not isa irqs.  So since
what we get from acpi is a gsi teach acpi_get_overrride_irq to
operate on a gsi instead of an isa_irq.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-2-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There are a number of cases where the current code makes the assumption
that isa irqs identity map to the first 16 acpi global system intereupts.
In most instances that assumption is correct as that is the required
behaviour in dual i8259 mode and the default behavior in ioapic mode.

However there are some systems out there that take advantage of acpis
interrupt remapping  for the isa irqs to have a completely different
mapping of isa_irq to gsi.

Introduce acpi_isa_irq_to_gsi to perform this mapping explicitly in the
code that needs it.  Initially this will be just the current assumed
identity mapping to ensure it's introduction does not cause regressions.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-1-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

cleanup only.

setup_arch(), doesn't care care if ACPI initialization succeeded
or failed, so delete acpi_boot_table_init()'s return value.
Signed-off-by: NLen Brown <len.brown@intel.com>

Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

v2->v1:
.improve debug info as suggedted by Bjorn,Kenji
.API is using uuid string as suggested by Alexey

Add an API to execute _OSC. A lot of devices can have this method, so add a
generic API.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_check_resource_conflict() doesn't change the resource
it operates on, so the res parameter can be marked const.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_osi_setup() does not depend on CONFIG_DMI
acpi_dmi_osi_linux()'s definition doesn't depend on CONFIG_DMI either
Signed-off-by: NLen Brown <len.brown@intel.com>

users of acpi.h that need dmi.h should include it directly.
Signed-off-by: NLen Brown <len.brown@intel.com>

linux/acpi.h is the top level header for interfacing
with the ACPI sub-system, so acpi_disabled should be
up there instead of down in asm/acpi.h -- particularly
since asm/acpi.h doesn't exist for all architectures.

Same story for acpi_table_parse(), which is a top-level
API to Linux/ACPI.

This is necessary for building some code that
used to always depend on CONFIG_ACPI=y, but will soon
also need to build with CONFIG_ACPI=n.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Move
arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg()
to
arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg()
where it is used, and make it static.

Move associated globals and helper routine with it.

No functional change.

This code move is in preparation for SFI support,
which will allow the PCI code to find the MCFG table
on systems which do not support ACPI.
Signed-off-by: NLen Brown <len.brown@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NLen Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This counter may prove useful in debugging some
spurious interrupt issues seen in the field.
Signed-off-by: NLen Brown <len.brown@intel.com>

All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
    
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
    
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

- Rename pci_osc_control_set() to acpi_pci_osc_control_set() according
  to the other API names in drivers/acpi/pci_root.c.

- Move _OSC related definitions to include/linux/acpi.h because _OSC
  related API is implemented in drivers/acpi/pci_root.c now.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: NAndrew Patterson <andrew.patterson@hp.com>
Tested-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: fix build error

to fix:

  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here
  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

to prevent wrongly overwriting fixmap that still want to use.

ACPI used to rely on low mappings being all linearly mapped and
grew a habit: it never really unmapped certain kinds of tables
after use.

This can cause problems - for example the hypothetical case
when some spurious access still references it.

v2: remove prev_map and prev_size in __apci_map_table
v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to
early_acpi_os_unmap_memory
v4: fix typo in one acpi_get_table_with_size calling
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The struct acpi_prt_entry is used only in pci_irq.c, so there's no
need for the declaration to be public.  This patch moves it into
pci_irq.c.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

On some machines it may be necessary to disable the saving/restoring
of the ACPI NVS memory region during hibernation/resume.  For this
purpose, introduce new ACPI kernel command line option
acpi_sleep=s4_nonvs.

Based on a patch by Zhang Rui.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@tuxonice.net>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

If an ACPI graphics device supports backlight brightness functions (cmp. with
latest ACPI spec Appendix B), let the ACPI video driver control backlight and
switch backlight control off in vendor specific ACPI drivers (asus_acpi,
thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi).

Currently it is possible to load above drivers and let both poke on the
brightness HW registers, the video and vendor specific ACPI drivers -> bad.

This patch provides the basic support to check for BIOS capabilities before
driver loading time. Driver specific modifications are in separate follow up
patches.

"acpi_backlight=vendor"
	Prever vendor driver over ACPI driver for backlight.
"acpi_backlight=video" (default)
	Prever ACPI driver over vendor driver for backlight.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Remove CONFIG_ACPI_EC.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

Per section 6.5.4 of the ACPI 3.0b specification,

    OSPM must make Embedded Controller operation regions, accessed
    via the Embedded Controllers described in ECDT, available before
    executing any control method.

The ECDT table is optional, but if it is present, the above text
means that the EC it describes is a required part of the ACPI
subsystem, so CONFIG_ACPI_EC=n wouldn't make sense.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

This was a workaround for 32bit numa SRAT processing, and we removed those
workarounds, making 32 bit more like 64 bit.  HAVE_ARCH_PARSE_SRAT is no
longer defined anywhere.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>